Draytek - pfSense established but no traffic
-
Hi,
I have managed to connect a Draytek Vigor 2820 using lan-to-lan with pfSense, but cannot get any traffic to pass through it. TCPDUMP shows there is traffic going in and out of pfSense.When pinging a host from a NAT machine on the pfSense side:
16:23:22.272130 IP (pfsense) > (office): AH(spi=0x1ba4eac7,seq=0x9f): IP 10.1.6.4 > 192.168.111.1: ICMP echo request, id 34350, seq 8, length 64 (ipip-proto-4)
When pinging a host from a NAT machine in the office:
16:24:37.185381 IP (office) > (pfsense): AH(spi=0x058e938a,seq=0x3d2): IP 192.168.111.40 > 10.1.5.200: ICMP echo request, id 24836, seq 1, length 64 (ipip-proto-4)I see no replies when pinging, and similar tcpdump traffic when attempting to connect to any TCP ports but no successful connection.
I have an allow all rule on the IPSec tab of the firewall rules - am I missing anything else?Chris.
-
Solved - I was using AH in phase 2. Changed to ESP and everything worked fine.
-
Hi,
would you share what configuration you used, I'm struggling with a 2800 at the moment?
Cheers!