Newer Version of the dhclient-script
-
With the original script i got this for the Interface in
System:Gateways:
Name Interface Gateway Monitor IP Description ------------------------------------------------------------------------------------------------------------------ GW_OPT3 IPTV 255.255.255.255 255.255.255.255 Interfaceopt3dynamic gatewayWith the script from the cvs server i get:
Name Interface Gateway Monitor IP Description ----------------------------------------------------------------------------------------------------------- GW_OPT3 IPTV dynamic dynamic Interfaceopt3dynamic gatewayMaybe this informations is useful for you…
Is this Information helpful to you? Or do need another Infos / Tests?
-
Any news, regarding this topic?
-
Will this Issue be fixed in the final version?
-
I second the request to update the dhclient-script!
Everyone using T-Home IPTV in Germany is going to have issues if its not updated…
To clarify this problem:
T-Home is using vlans to seperate Web and IPTV traffic. The Web traffic is using PPPoE on Vlan 7, the IPTV traffic is using dhcp on Vlan8.
IPTV is using unicast for the first 10 seconds of the stream and then switches to multicast which is working very good with the new igmp proxy(which is still spamming the main systemlog making it unusable btw!!!)The problem which is fixed by the new dhclient script is that the old script sets a gateway to 255.255.255.255 which is useless and causes the first 10 seconds of unicast to fail which in turn makes switching channels very slow because the STB has to wait for the multicast to begin(1-2 seconds...)
This is a packetcapture for the iptv interface dhcp reply:
07:30:37.027153 00:19:db:e3:89:6a > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 342: (tos 0x10, ttl 16, id 0, offset 0, flags [none], proto UDP (17), length 328) 93.228.4.94.68 > 255.255.255.255.67: [udp sum ok] BOOTP/DHCP, Request from 00:19:db:e3:89:6a, length 300, xid 0x8113a23f, Flags [none] (0x0000) Client-Ethernet-Address 00:19:db:e3:89:6a Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Requested-IP Option 50, length 4: 93.228.4.94 Client-ID Option 61, length 7: ether 00:19:db:e3:89:6a Hostname Option 12, length 8: "dayroute" Parameter-Request Option 55, length 8: Subnet-Mask, BR, Time-Zone, Classless-Static-Route Default-Gateway, Domain-Name, Domain-Name-Server, Hostname 07:30:37.093868 00:15:c7:22:89:00 > 00:19:db:e3:89:6a, ethertype IPv4 (0x0800), length 375: (tos 0x0, ttl 255, id 17300, offset 0, flags [none], proto UDP (17), length 361) 93.228.31.254.67 > 93.228.4.94.68: [no cksum] BOOTP/DHCP, Reply, length 333, xid 0x8113a23f, Flags [none] (0x0000) Your-IP 93.228.4.94 Server-IP 193.158.137.14 Gateway-IP 93.228.31.254 Client-Ethernet-Address 00:19:db:e3:89:6a sname "DHSTG001" Vendor-rfc1048 Extensions Magic Cookie 0x63825363 Subnet-Mask Option 1, length 4: 255.255.224.0 Default-Gateway Option 3, length 4: 255.255.255.255 Lease-Time Option 51, length 4: 86400 DHCP-Message Option 53, length 1: ACK Server-ID Option 54, length 4: 193.158.137.14 RN Option 58, length 4: 43200 RB Option 59, length 4: 75600 Classless-Static-Route Option 121, length 51: (193.158.137.14/32:93.228.31.254),(87.140.255.0/25:93.228.31.254),(87.141.128.0/17:93.228.31.254),(193.158.34.0/23:93.228.31.254),(212.184.168.0/24:93.228.31.254),(217.6.167.160/27:93.228.31.254)old script log entrys:
Feb 25 07:30:37 dhclient: PREINIT Feb 25 07:30:37 dhclient[14532]: DHCPREQUEST on em1_vlan8 to 255.255.255.255 port 67 Feb 25 07:30:37 dhclient[14532]: DHCPACK from 93.228.31.254 Feb 25 07:30:37 dhclient: REBOOT Feb 25 07:30:37 dhclient: Starting add_new_address() Feb 25 07:30:37 dhclient: ifconfig em1_vlan8 inet 93.228.4.94 netmask 255.255.224.0 broadcast 93.228.31.255 Feb 25 07:30:37 dhclient: New IP Address (em1_vlan8): 93.228.4.94 Feb 25 07:30:37 dhclient: New Subnet Mask (em1_vlan8): 255.255.224.0 Feb 25 07:30:37 dhclient: New Broadcast Address (em1_vlan8): 93.228.31.255 Feb 25 07:30:37 dhclient: New Routers (em1_vlan8): 255.255.255.255 Feb 25 07:30:37 dhclient: Adding new routes to interface: em1_vlan8 Feb 25 07:30:37 dhclient: New Classless Static Routes (em1_vlan8): 193.158.137.14/32 93.228.31.254 87.140.255.0/25 93.228.31.254 87.141.128.0/17 93.228.31.254 193.158.34.0/23 93.228.31.254 212.184.168.0/24 93.228.31.254 217.6.167.160/27 93.228.31.254 Feb 25 07:30:37 dhclient: Creating resolv.conf Feb 25 07:30:37 dhclient[14532]: bound to 93.228.4.94 -- renewal in 43200 seconds.new script log entrys:
Feb 25 07:45:23 dhclient[22251]: DHCPREQUEST on em1_vlan8 to 255.255.255.255 port 67 Feb 25 07:45:23 dhclient[22251]: DHCPACK from 93.228.31.254 Feb 25 07:45:23 dhclient: New IP Address (em1_vlan8): 93.228.4.94 Feb 25 07:45:23 dhclient: New Subnet Mask (em1_vlan8): 255.255.224.0 Feb 25 07:45:23 dhclient: New Broadcast Address (em1_vlan8): 93.228.31.255 Feb 25 07:45:23 dhclient: New Routers (em1_vlan8): 255.255.255.255 Feb 25 07:45:23 dhclient: New Classless Static Routes (em1_vlan8): 193.158.137.14/32 93.228.31.254 87.140.255.0/25 93.228.31.254 87.141.128.0/17 93.228.31.254 193.158.34.0/23 93.228.31.254 212.184.168.0/24 93.228.31.254 217.6.167.160/27 93.228.31.254 Feb 25 07:45:23 dhclient[22251]: bound to 93.228.4.94 -- renewal in 43200 seconds.Which results in this:
With the original script i got this for the Interface in
System:Gateways:
Name Interface Gateway Monitor IP Description ------------------------------------------------------------------------------------------------------------------ GW_OPT3 IPTV 255.255.255.255 255.255.255.255 Interfaceopt3dynamic gatewayWith the script from the cvs server i get:
Name Interface Gateway Monitor IP Description ----------------------------------------------------------------------------------------------------------- GW_OPT3 IPTV dynamic dynamic Interfaceopt3dynamic gatewayMaybe this informations is useful for you…
Both scripts however create the same routing entrys so this is aparently not a routing issue…:
-
push
-
Will this Issue be fixed in Version 2?
I think with the logs and the explanation inside this thread the problem is reasonably specified.
But if you need another tests/logs, I will give it to you.
Thx!
-
Its not a dhclient issue.
Try this https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/5766add89187bf47c225f67697e37ca25b0dbc71 or wait for the next snapshots. -
sorry, this doesn´t fix it:
I tried this Build:
2.0-RC1 (i386) built on Wed Apr 6 11:10:23 EDT 2011
Your changes are included in this Build:
if [ "$new_ip_address" = "$router" -o "$router" = "255.255.255.255" ]; then $ROUTE add default -iface $interface echo $ROUTE add default -iface $interface | $LOGGER # NOTE: Do not activate this for all ones address since pf(4) will try to forward packets to it. if [ "$new_ip_address" = "$router" ]; then echo $router > /tmp/${interface}_router fi else $ROUTE add default $router echo $ROUTE add default $router | $LOGGER echo $router > /tmp/${interface}_router fiBut for the Interface I still got:
System: Gateways GW_OPT3 IPTV 255.255.255.255 255.255.255.255 Interfaceopt3dynamic gatewayand I got the same Problems…
-
Can you remove the /tmp/*_router and try dhclient or Save button on the interface page and see if you will get the same?
Maybe making sure that a remnant file is not causing issues.Otherwise something is not matching in that if statement.
-
Sorry, no difference…
after removing the *_router files in /tmp and renewing DHCP-Lease GW is still 255.255.255.255
/tmp(20): cat vr2_vlan8_router 255.255.255.255 ---- GW_OPT3 IPTV 255.255.255.255 255.255.255.255 Interfaceopt3dynamic gateway -
Can you try by changing that section from
if [ "$new_ip_address" = "$router" -o "$router" = "255.255.255.255" ]; then
$ROUTE add default -iface $interface
echo $ROUTE add default -iface $interface | $LOGGER
# NOTE: Do not activate this for all ones address since pf(4) will try to forward packets to it.
if [ "$new_ip_address" = "$router" ]; then
echo $router > /tmp/${interface}_router
fi
else
$ROUTE add default $router
echo $ROUTE add default $router | $LOGGER
echo $router > /tmp/${interface}_router
fito
if [ "$router" = "255.255.255.255" ]; then
$ROUTE add default -iface $interface
echo $ROUTE add default -iface $interface | $LOGGER
# NOTE: Do not activate this for all ones address since pf(4) will try to forward packets to it.
elif [ "$new_ip_address" = "$router" ]; then
$ROUTE add default -iface $interface
echo $ROUTE add default -iface $interface | $LOGGER
echo $router > /tmp/${interface}_router
else
$ROUTE add default $router
echo $ROUTE add default $router | $LOGGER
echo $router > /tmp/${interface}_router
fiAlso please check which of the messages from the above are in your system log.
-
Hi,
I changed the script to:
for router in $new_routers; do if [ "$router" = "255.255.255.255" ]; then $ROUTE add default -iface $interface echo $ROUTE add default -iface $interface | $LOGGER $LOGGER "TEST1" # NOTE: Do not activate this for all ones address since pf(4) will try to forward packets to it. elif [ "$new_ip_address" = "$router" ]; then $ROUTE add default -iface $interface echo $ROUTE add default -iface $interface | $LOGGER $LOGGER "TEST2" echo $router > /tmp/${interface}_router else $ROUTE add default $router echo $ROUTE add default $router | $LOGGER $LOGGER "TEST3" echo $router > /tmp/${interface}_router fiYou see, for testing I added $LOGGER "TEST1", $LOGGER "TEST2" and $LOGGER "TEST3" in each If, elif and else block.
But in System-Log i can´t see any TEST1, TEST2 or TEST3
Apr 8 00:02:03 dhclient[4730]: bound to 84.142.199.75 -- renewal in 43200 seconds. Apr 8 00:02:03 dhclient: Creating resolv.conf Apr 8 00:02:02 dhclient: New Classless Static Routes (vr2_vlan8): 193.158.137.14/32 84.142.255.254 87.140.255.0/25 84.142.255.254 87.141.128.0/17 84.142.255.254 193.158.34.0/23 84.142.255.254 212.184.168.0/24 84.142.255.254 217.6.167.160/27 84.142.255.254 Apr 8 00:02:02 dhclient: Adding new routes to interface: vr2_vlan8 Apr 8 00:02:02 dhclient: New Routers (vr2_vlan8): 255.255.255.255 Apr 8 00:02:02 dhclient: New Broadcast Address (vr2_vlan8): 84.142.255.255 Apr 8 00:02:02 dhclient: New Subnet Mask (vr2_vlan8): 255.255.192.0 Apr 8 00:02:02 dhclient: New IP Address (vr2_vlan8): 84.142.199.75 Apr 8 00:02:02 dhclient: ifconfig vr2_vlan8 inet 84.142.199.75 netmask 255.255.192.0 broadcast 84.142.255.255 Apr 8 00:02:02 dhclient: Starting add_new_address() Apr 8 00:02:02 dhclient: BOUND Apr 8 00:02:02 dhclient[4730]: DHCPACK from 84.142.255.254 Apr 8 00:02:02 dhclient[4730]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:02:02 dhclient: ARPCHECK Apr 8 00:02:00 dhclient: ARPSEND Apr 8 00:02:00 dhclient[4730]: DHCPOFFER from 84.142.255.254 Apr 8 00:02:00 dhclient[4730]: DHCPDISCOVER on vr2_vlan8 to 255.255.255.255 port 67 interval 2 Apr 8 00:01:54 dhclient[4730]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:01:51 dhclient[4730]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:01:49 dhclient[4730]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:01:47 dhclient[4730]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:01:47 dhclient: PREINIT Apr 8 00:01:46 dhclient[61966]: exiting. Apr 8 00:01:46 dhclient[61966]: exiting. Apr 8 00:01:46 dhclient[61966]: connection closed Apr 8 00:01:46 dhclient[61966]: connection closed Apr 8 00:01:46 dhclient[61832]: bound to 84.142.199.75 -- renewal in 43200 seconds. Apr 8 00:01:46 dhclient: Creating resolv.conf Apr 8 00:01:46 dhclient: New Classless Static Routes (vr2_vlan8): 193.158.137.14/32 84.142.255.254 87.140.255.0/25 84.142.255.254 87.141.128.0/17 84.142.255.254 193.158.34.0/23 84.142.255.254 212.184.168.0/24 84.142.255.254 217.6.167.160/27 84.142.255.254 Apr 8 00:01:46 dhclient: Adding new routes to interface: vr2_vlan8 Apr 8 00:01:46 dhclient: New Routers (vr2_vlan8): 255.255.255.255 Apr 8 00:01:46 dhclient: New Broadcast Address (vr2_vlan8): 84.142.255.255 Apr 8 00:01:46 dhclient: New Subnet Mask (vr2_vlan8): 255.255.192.0 Apr 8 00:01:46 dhclient: New IP Address (vr2_vlan8): 84.142.199.75 Apr 8 00:01:46 dhclient: ifconfig vr2_vlan8 inet 84.142.199.75 netmask 255.255.192.0 broadcast 84.142.255.255 Apr 8 00:01:46 dhclient: Starting add_new_address() Apr 8 00:01:46 dhclient: BOUND Apr 8 00:01:46 dhclient[61832]: DHCPACK from 84.142.255.254 Apr 8 00:01:46 dhclient[61832]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:01:46 dhclient: ARPCHECK Apr 8 00:01:44 dhclient: ARPSEND Apr 8 00:01:43 dhclient[61832]: DHCPOFFER from 84.142.255.254 Apr 8 00:01:43 dhclient[61832]: DHCPDISCOVER on vr2_vlan8 to 255.255.255.255 port 67 interval 1 Apr 8 00:01:38 dhclient[61832]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:01:33 dhclient[61832]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:01:31 dhclient[61832]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:01:29 dhclient[61832]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:01:28 dhclient[61832]: DHCPREQUEST on vr2_vlan8 to 255.255.255.255 port 67 Apr 8 00:01:28 dhclient: PREINITGateway is still 255.255.255.255
GW_OPT3 IPTV 255.255.255.255 255.255.255.255 Interfaceopt3dynamic gateway -
I made a fix that will be in latest snapshots which should fix this by not having a gateway declared from dhcp and so no PBR will be done from pfSense and routes will be followed.
Please test latest snapshots and let me know.
-
This fixed my issue!
GW_OPT3 IPTV dynamic dynamic Interfaceopt3dynamic gatewayThank you, very much!