Possibly overkill using pfsense?
-
actually yes!
-
A quick search found this old thread which suggests that it won't work in 1.2.3. I don't know about 2.0.
-
hmm… would this be the point were m0n0 may have this type of functionality working?
-
Looking at your request there isn't alot of real detail so I won't assume or offer relative answers however
psfsense Captive portal can work well if setup correctly.
Networking features natting/dhcp/routing/vlans all work with captive portal in place.
Captive portal offers 3 types of authentication passthrough/local db/radius. In passthrough you still need to setup f/w rules
to prevent or allow traffic to pass. With the others you have to have a client dns entry pointing to your pfsense for the splash page to
work.
Captive portal is limited in functionality as compared with mikrotik and others; so the decision is commercial as well as functional.
If your offering hotspot services then pfsense will be limited; however if provisioning straight access alone then suitable. -
@nzbreser
what is missing from mikrotik in CP? -
@ermal:
@nzbreser
what is missing from mikrotik in CP?Maybe this one,pfSense do not support remote disconnection using POD packets, instead it is using
reauthentication (Reauthenticate connected users every minute,i think there must be options 1/5/10 min) -
i think there must be options 1/5/10 min
This would be a very welcome addition, at least for me.
-
to set the re-authentication interval edit /etc/inc/captiveportal.inc and change it to whatever you want.
/* initialize minicron interval value */
$croninterval = $config['captiveportal']['croninterval'] ? $config['captiveportal']['croninterval'] : 60;/* double check if the $croninterval is numeric and at least 10 seconds. If not we set it to 60 to avoid problems */
if ((!is_numeric($croninterval)) || ($croninterval < 10)) { $croninterval = 60; }note that you can also set it in config.xml but there is no gui to do this for you. Either way works.
–luis
-
You can set this on the gui
-
@ermal:
You can set this on the gui
Where is located this options ?
-
UP
