Vyprvpn and specific port routing..
-
alright so you've got the firewall rule,
I also created a rule under the openvpn client that connects to vypr vpn to allow all traffic…
this possibly ? ```
redirect-gateway def1provide me with some screenshots of: note : black out or blur any unrelated content ! SYSTEM –> ROUTING --> GATEWAYS FIREWALL --> RULES --> LAN VPN --> OPENVPN --> CLIENT --> CONTENTS OF VYPRVPN CLIENT DIAGNOSTICS --> ROUTES
-
Here are the screenshots.. I have disabled the vyprvpn rule because if I enable it no web traffc was possible…
If you need more info let me know !!
-
ahh ok,
everything looks finedo this:
-
re-enable the lan rule
-
go to FIREWALL –> NAT --> OUTBOUND
-
select "Manual Outbound NAT rule generation" and click save
your set.
-
-
I had already Manual Outbound NAT Rule Generation turned on…
So I turned it off, restarted. And I did your steps again, restarted. Still no luck, I can't even ping to the outside, when I turn the vyprvpn firewall rule off I have internet back again.
Any other idea's? Could there be something wrong wtih my pfsense instalation itself? Never had any problems before...
Thnx again for your time.
-
I also created a rule under the openvpn client that connects to vypr vpn to allow all traffic…
this possibly ? ```
redirect-gateway def1if you do not have this, please add it to Advanced Configuration, under the vpn client. disable & restart the client.
-
Added your line to the advanced configuration of the vyprvpn clent..
But no luck, still not working.
I think I am going to setup a new PFsense installation on a different drive, I want to test if it then works..
-
I have a working openvpn client in Pfsense to vyprvpn, it took me a while to get that working but now it is. :)
Remco,
Could you provide some details what exactly you did to configure vyprvpn? I'm trying to set it up and always fail at basically the same point:
When I set peer to peer shared key as server mode openvpn complains about the usage of auth-user-pass setting of the advanced field. when I set server mode to ssl/tls I can set the CA key provided by vyprvpn, but I have no client key… so openvpn fails at that point. how did you get a client certificate?
thanks.
-
Hi,
I will try to make a tutorial tonight, I don't have enough time now.
Remco
-
any further info? i can't wait to get it working but I'm stuck without your help ;)
-
any further info? i can't wait to get it working but I'm stuck without your help ;)
Found the tutorial here,
http://forum.pfsense.org/index.php/topic,35292.0.htmland here,
http://forum.pfsense.org/index.php/topic,29944.0.htmlWorking great, thanks.
-
I have started a tutorial topic:
http://forum.pfsense.org/index.php/topic,35292.0.html