Vyprvpn and specific port routing..

rwijbenga

Here are the screenshots.. I have disabled the vyprvpn rule because if I enable it no web traffc was possible…

If you need more info let me know !!

ericab

ahh ok,
everything looks fine

do this:

re-enable the lan rule
go to FIREWALL –> NAT --> OUTBOUND
select "Manual Outbound NAT rule generation" and click save

your set.

rwijbenga

I had already Manual Outbound NAT Rule Generation turned on…

So I turned it off, restarted. And I did your steps again, restarted. Still no luck, I can't even ping to the outside, when I turn the vyprvpn firewall rule off I have internet back again.

Any other idea's? Could there be something wrong wtih my pfsense instalation itself? Never had any problems before...

Thnx again for your time.

ericab

I also created a rule under the openvpn client that connects to vypr vpn to allow all traffic…

this possibly ? ```
redirect-gateway def1

if you do not have this, please add it to Advanced Configuration, under the vpn client. disable & restart the client.

rwijbenga

Added your line to the advanced configuration of the vyprvpn clent..

But no luck, still not working.

I think I am going to setup a new PFsense installation on a different drive, I want to test if it then works..

obstler

@rwijbenga:

I have a working openvpn client in Pfsense to vyprvpn, it took me a while to get that working but now it is. :)

Remco,

Could you provide some details what exactly you did to configure vyprvpn? I'm trying to set it up and always fail at basically the same point:

When I set peer to peer shared key as server mode openvpn complains about the usage of auth-user-pass setting of the advanced field. when I set server mode to ssl/tls I can set the CA key provided by vyprvpn, but I have no client key… so openvpn fails at that point. how did you get a client certificate?

thanks.

rwijbenga

Hi,

I will try to make a tutorial tonight, I don't have enough time now.

Remco

obstler

any further info? i can't wait to get it working but I'm stuck without your help ;)

chhaggerty

@obstler:

any further info? i can't wait to get it working but I'm stuck without your help ;)

Found the tutorial here,
http://forum.pfsense.org/index.php/topic,35292.0.html

and here,
http://forum.pfsense.org/index.php/topic,29944.0.html

Working great, thanks.

rwijbenga

I have started a tutorial topic:

http://forum.pfsense.org/index.php/topic,35292.0.html