Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    First Pfsense router- would like input

    Scheduled Pinned Locked Moved Hardware
    12 Posts 3 Posters 5.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Memory will not be problem. 2Gb enough for anything at that throughput.

      I can push ~50Mbits OpenVPN with my Pentium-M 1500. If you compare that with the D510 cpu mark scores you should have no problem Even if you assume that it may not share the load across the two cores very well the D410 is only marginally slower than the P-M 1.5:
      http://www.cpubenchmark.net/cpu_lookup.php?cpu=Intel+Atom+D410+%40+1.66GHz

      What NIC is on board the MSI?
      Stick to Intel if possible.

      Steve

      Edit: Having read through that chart there seem to be some highly suspect results. You should still be fine though.  ::)

      Edit: This looks less encouraging:
      @Wikipedia:

      The performance of a single core Atom is about half that of a Pentium M of the same clock rate.

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Looks like Databeestje has already done extensive testing on a D510 board:
        http://forum.pfsense.org/index.php/topic,27780.0.html

        Steve

        1 Reply Last reply Reply Quote 0
        • P
          poplap120
          last edited by

          ok thanks, just wanted to know i wasn't putting money in to something that would not work. the on board NIC of the Wind is a Realtek 8111DL. the second NIC i have is also a Realtek, would you recommend i get an intel one or will it be fine for my use.

          Im not so worried about the VPN performance as the main user will be me and maybe one other person (rarely and only light use), the real reason i want it is so when i go on a trip i can get to my freeNAS easily.

          thanks again

          EDIT: would you recommend i go with the released version or should i just go with 2.0, how hard is it to upgrade pfsnese, is it just uploading the install files to the web interface or is it putting in a cd with it on and selecting upgrade??

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            A quick forum search shows a number of people using that NIC. Typically Intel NICs are better supported with fewer bugs. You'll probably have no problems with your Realtek NICs. Some of the older 10/100 ones were pretty flaky.  ::)

            pfSense 2.0 is now RC1 and is quite stable. I use both 1.2.3 and 2.0 here for very light duties. I'm running 1.2.3 on the box that other people rely on for their Facebook access, if it goes down I get complaints!

            There's a lot of nice new features in 2.0. If you do I recommend running the actual RC1 release, not one of the daily snapshots, unless you have a specific problem that has been fixed. The snapshots, while generally very stable, will contain new code and may contain new bugs.

            Upgrading in 2.0 is simply a matter of pressing the upgrade button in the GUI.

            Steve

            1 Reply Last reply Reply Quote 0
            • P
              poplap120
              last edited by

              ok thanks

              i will see if it works with what i already have before i spend more money but if i have problems i will get an intel replacement.

              is it really that easy to upgrade,  ;D thats great.

              im going to buy the board and the drive and hopefully build it next weekend.

              thanks again

              1 Reply Last reply Reply Quote 0
              • P
                poplap120
                last edited by

                ok so the board i was going to get sold before i could get it so would you recommend any other ones preferably inexpensive.

                Thanks

                1 Reply Last reply Reply Quote 0
                • P
                  poplap120
                  last edited by

                  what do you guys think of this board?  BIOSTAR IPV10-IA

                  i can get it for about 150 and it has two gigbit NICs, i can use other components i already have, a 250gb hdd, 2x2gb ddr3 ram sticks, 450 80+ PSU, etc.

                  thanks

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    If you have a choice I'd go with Intel NICs over almost everything else.
                    You won't need more than 1gb of ram, 10gb HD and, with an atom, a lot less than a 450W PSU. So those components would probably serve you better in a different system.

                    All these things seem expensive to me. I'm running an old Watchguard Firebox that I bought from Ebay for £40. It has 3x Intel Gbit NICs and 6x Intel 10/100 NICs. It has wireless, via an old mini-pci card I had and after a few mods consumes ~40W.

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • D
                      dreamslacker
                      last edited by

                      @poplap120:

                      what do you guys think of this board?  BIOSTAR IPV10-IA

                      i can get it for about 150 and it has two gigbit NICs, i can use other components i already have, a 250gb hdd, 2x2gb ddr3 ram sticks, 450 80+ PSU, etc.

                      thanks

                      It will work.  As will many other Pineview D510/ D525 boards.  Intel NICs are very much preferred.

                      You could go for some other board and grab an Intel PWLA8492MT dual-GBe PCI NIC from eBay for a song (US$30 with free shipping).
                      See:  http://cgi.ebay.com.sg/Intel-8492MT-1000Mbps-Dual-Port-Server-Network-Card-PCI-/330559181717?pt=LH_DefaultDomain_0&hash=item4cf6dcd395

                      Most of the Atom boards will feature a PCI slot anyway and the MT card comes with both full and half-height brackets.

                      1 Reply Last reply Reply Quote 0
                      • P
                        poplap120
                        last edited by

                        all the other hardware is what i have laying around from past build/upgrades.

                        well if you guys could recommend a board that is under US$200 for total cost (i already have, 2x2gb DDR3, 2x1gb DDR2, 450w PSU, 250gb hd, gigbit Realtek PCI nic, also have2x256 DDR SOD but i dont that will work with much ::) )

                        like i said it doesn't need to do much with the most intensive task being 1 or 2 VPN connections, although it would be nice to have a total of 3 nics (including the pci one i have) so i can have WAN, LAN, LAN (wireless).

                        thanks

                        EDIT: i also have a old core2duo as well but the mobo it was in is fried so i would need a new one of thoughs

                        1 Reply Last reply Reply Quote 0
                        • P
                          poplap120
                          last edited by

                          im going to go ahead i order the board i listed. hope it all works.  ;)

                          Thanks again for the support.

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.