Country Block
-
@Bai:
There is no reason why you can't install it and try it. If it doesn't work, it doesn't work. It doesn't break anything or mess with your install at all.
My money says that it will work just fine, in fact I guarantee that it works!Or your money back!
:)
Not like someone can't easily backup their current configuration, and at worse, reinstall pfsense…easy as all get out with minimal time. This isn't a Windows Server rebuild...
-
You're correct about reinstalling pfSense. It's fast and easy. The problem is that the data center is a 45 minute drive (one way) from where I'm located.
I'm hoping to have the ability to install County Block yet allow specific IPs from banned countries access. I have a few clients that have people in those countries that do programming and they need to have access to their sites.
-
You're correct about reinstalling pfSense. It's fast and easy. The problem is that the data center is a 45 minute drive (one way) from where I'm located.
I'm hoping to have the ability to install County Block yet allow specific IPs from banned countries access. I have a few clients that have people in those countries that do programming and they need to have access to their sites.
Just bustin' your chops…I understand. Being an IT one has to be sure before making willy-nilly decisions. I've been using Country Block since its inception and it is awesome, in fact it is the reason I started pfsense. I prefer the 1.2.3 version as it is solid. As far as your questions about specific IPs...that would be a cool feature but I haven't seen it implemented yet. I'm still trying to figure out why the email doesn't work effectively. Hmm. Good luck mate!
-
Another dumb question…
After I install Country Block, I'm blocking all of the countries you have listed as top spammers. You made it easy, because those are the countries I do want to block.
I do have a few clients that correspond with people in the countries I want to block because these people do programming for them. How do I go about blocking the country yet allowing a few specific IPs access to our network?
Again, thanks for your time.
Take a look at the whitelist tab.
-
Take a look at the whitelist tab.
Damn…even comes with an example... I'll just go back to that email tab...
-
Damn, I do feel like an idiot!
I guess I should have installed it and asked questions later!
Duh!
Thanks!
-
Hi,
few more questions.
Is the IP address list updated automatically?
If not where are the files located for me to edit?
If I were to try to edit I noticed that countryipblocks.net format is x.x.x.x/sn.
I ask because I had someone spam one of my forums I host. Their IP was in the Ukraine, but was not on the list from that website. I have the person's IP address but I dont think theres any way for me to tell the subnet.
Any insight?
-
Hi,
few more questions.
Is the IP address list updated automatically?
If not where are the files located for me to edit?
If I were to try to edit I noticed that countryipblocks.net format is x.x.x.x/sn.
I ask because I had someone spam one of my forums I host. Their IP was in the Ukraine, but was not on the list from that website. I have the person's IP address but I dont think theres any way for me to tell the subnet.
Any insight?
What's the IP?
-
At this point I dont recall. :(
-
Hey Tommyboy180
Don't you love it when we can't remember? I know you have to just shake your head.
-
I banned the previous user from my forum which deleted any information pertaining to the IP address. However a new spammer registered and i ran an ARIN lookup on his IP address. It comes from this CIDR block in Denmark: 91.0.0.0/8
Obviously its not in the list, how do I add this block to my list manually? Where are the files for the lists located?
Thanks in advance!
-
I banned the previous user from my forum which deleted any information pertaining to the IP address. However a new spammer registered and i ran an ARIN lookup on his IP address. It comes from this CIDR block in Denmark: 91.0.0.0/8
Obviously its not in the list, how do I add this block to my list manually? Where are the files for the lists located?
Thanks in advance!
Take a look at the denmark country at http://www.countryipblocks.net/country-blocks/select-formats/. This list is the one I have in the package. From what I can tell most of 91 is in there.
The entire 91.0.0.0/8 block does not belong to Denmark. Denmark only has a few networks out of that range. The EU also uses 91 as well as Russia. Therefore you need to find exactly what country that IP belongs to and block that country.
-
Just a quick "Thank You, Tommy!" Package seems to run smoothly on RC1 embedded now (tested for a couple of days now, survived test reboot, rule changes, and pppoe dialups). Just did a plain install, no manual cron jobs or anything.
Best
Georg -
@ghm:
Just a quick "Thank You, Tommy!" Package seems to run smoothly on RC1 embedded now (tested for a couple of days now, survived test reboot, rule changes, and pppoe dialups). Just did a plain install, no manual cron jobs or anything.
Best
GeorgGlad to hear it! I am constantly working on this package and other packages (even some future releases to come).
If you like it that much consider donating at http://tomschaefer.org/pfsense/ -
I'm not sure why, but I had some issues installing Country Block.
- Before starting, I upgraded to the most recent version of pfSense (05-27-2011).
- After the box rebooted, I installed bandwidthd, all went good.
- I then tired installing Country Block and it failed. I tried to install it 3 more times with no luck.
- Finally, I un-installed bandwidthd and tried installing County Block. At this time, it appears that County Block installed okay. I then re-installed bandwidthd.
My question is… how can I tell if County Block is working? I set it to logging, but can't find the logs to see if it's working. I know I'm missing something here.
Thanks!
-
I'm not sure why, but I had some issues installing Country Block.
- Before starting, I upgraded to the most recent version of pfSense (05-27-2011).
- After the box rebooted, I installed bandwidthd, all went good.
- I then tired installing Country Block and it failed. I tried to install it 3 more times with no luck.
- Finally, I un-installed bandwidthd and tried installing County Block. At this time, it appears that County Block installed okay. I then re-installed bandwidthd.
My question is… how can I tell if County Block is working? I set it to logging, but can't find the logs to see if it's working. I know I'm missing something here.
Thanks!
You can tell if countryblock is running by going to the countryblock package page. At the bottom of the page it will tell you if it is running. When you have logging enabled firewall logs will be generated under the firewall tab. You may see countries being blocked or nothing at all depending on your settings.
-
Glad to hear it! I am constantly working on this package and other packages (even some future releases to come).
If you like it that much consider donating at http://tomschaefer.org/pfsense/Done. Have RC2 embedded now, still runs. Only thing is that I don't see blocling messages in the FW log either despite having logs enabled. Minor issue though. Still works, I can tell because I have logging on for a pass rule - and only get pass log entries for allowed countries.
-
@ghm:
Glad to hear it! I am constantly working on this package and other packages (even some future releases to come).
If you like it that much consider donating at http://tomschaefer.org/pfsense/Done. Have RC2 embedded now, still runs. Only thing is that I don't see blocling messages in the FW log either despite having logs enabled. Minor issue though. Still works, I can tell because I have logging on for a pass rule - and only get pass log entries for allowed countries.
Thank you very much! And I will look into the logging problem.
When the rules are created the logging tag is appended to the pfsense firewall rules but I can't remember if I left out inbound on purpose or not. I'll will be able to take a look at it tonight.
-
Now I'm really confused!
After installing County Block, a client just called and they can't access our network. Since County Block is the only thing I changed, I knew it had to be in there. So I looked up the IP of 50.11.108.126 and it shows the following.
–--------------------------
50.11.108.126 is located within the following Network:Network: 50.8.0.0
CIDR: 50.8.0.0/13
Mask: 50.8.0.0/255.248.0.0
Network Range: 50.8.0.0 - 50.15.255.255
Total addresses: 524,288
Registrar: ARINThe interesting thing is that when I opened access for the county of Russia on Country Block, the client was able to get to our network. When I blocked Russia, they again could not access us again. So for the final time I unblocked Russia and they can now access again.
I also tired looking the IP up in the logs and can't find it as being blocked. I did enable logging in County Block and have verified again that it is indeed enabled. Am I missing something here?
Sorry, I'm trying to get a handle on all of this.
-
Now I'm really confused!
After installing County Block, a client just called and they can't access our network. Since County Block is the only thing I changed, I knew it had to be in there. So I looked up the IP of 50.11.108.126 and it shows the following.
–--------------------------
50.11.108.126 is located within the following Network:Network: 50.8.0.0
CIDR: 50.8.0.0/13
Mask: 50.8.0.0/255.248.0.0
Network Range: 50.8.0.0 - 50.15.255.255
Total addresses: 524,288
Registrar: ARINThe interesting thing is that when I opened access for the county of Russia on Country Block, the client was able to get to our network. When I blocked Russia, they again could not access us again. So for the final time I unblocked Russia and they can now access again.
I also tired looking the IP up in the logs and can't find it as being blocked. I did enable logging in County Block and have verified again that it is indeed enabled. Am I missing something here?
Sorry, I'm trying to get a handle on all of this.
I think you have stumbled across a huge problem!
50.11.108.126 is a US address so I need to verify the country ip block lists that come with the package are accurate.
Also as I mentioned to ghm above, I'm going to look at the logging feature. I may have left something commented out for a reason. When I get home tonight I will take a look.For now keep Russia unblocked or whitelist that IP. I should be able to update you on this issue later tonight. Thank you!