Network interface mismatch after each reboot

[parisien]

Hello.

My pfsense routeur is working perfectly.

But each time i reboot the computer i have this screen and i have to set the interface again.

Do you know what can be the problem ?

Thank you for your help.

.jpg)
.jpg_thumb)

[eri--]

You have to show more from your configuration to be able to give you any advice.

[parisien]

Hello.

What can i show you ?

is there a log that can help ???

i have 2 network card  (one is wan and one is lan) and one usb rt3070 wlan adaptor that i use as dhcp lan.

If i know what i can show about my configuration to help, tell me please.

(i am sorry my english is not good at all. i hope you understand what i say !!)

[wallabybob]

My guess is that you are missing a boot loader directive to load the firmware for your USB WLAN card. Consequently the USB WLAN card seems to be missing at startup so the startup code thinks there is a missing interface (run0).

Try adding the line

runfw_load="YES"

to /boot/loader.conf.local (create the file if it doesn't already exist).

A bit more information is in http://forum.pfsense.org/index.php/topic,36453.0.html

[parisien]

Hello.

yes i thing that also because i had to unplug and plug again the usb wlan card after boot !!!

i will try the fix tonight and i tell you.

Edit : i have a /boot/loader.conf
i can use it or i have to create also a /boot/loader.conf.local ???

Also another question.

My usb wlan is a 3000 mw power. But it seem that i do not receive it more far than other wlan cards.

Is there a special tweak in the driver of the adaptor to use the full power or the 99% setting on the webgui of opt1 is enough to have full power of the adapter ?

here is my ifconfig :

run0: flags=8a43 <up,broadcast,running,allmulti,simplex,multicast>metric 0 mtu 2290
        ether 00:e1:00:87:c7:a8
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
        status: running
run0_wlan0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
        ether 00:e1:00:87:c7:a8
        inet6 fe80::2e1:ff:fe87:c7a8%run0_wlan0 prefixlen 64 scopeid 0x8
        inet 192.168.5.1 netmask 0xffffff00 broadcast 192.168.5.255
        nd6 options=3 <performnud,accept_rtadv>media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
        status: running
        ssid "Open Free Wifi" channel 5 (2432 MHz 11g) bssid 00:e1:00:87:c7:a8
        country US authmode OPEN privacy OFF txpower 0 scanvalid 60
        protmode OFF -apbridge dtimperiod 1 -dfs</hostap></performnud,accept_rtadv></up,broadcast,running,promisc,simplex,multicast></hostap></up,broadcast,running,allmulti,simplex,multicast>

Thank you for all you help.

[clarknova]

pfsense parses /boot/loader.conf and /boot/loader.conf.local. The former will be replaced with a system upgrade, so it's recommended you created /boot/loader.conf.local and make your changes there. There is no need to included lines that are already in /boot/loader.conf, and if you have any conflicting settings in /boot/loader.conf.local, I believe they will take precedence.

[parisien]

It work !!!

thank you very much to all