Need driver for hardware watchdog

Cino

I have a suggestion as this has save my a$$ here and there doing remote updates and getting a panic for no reason.

Instead of putting 10_watchdog.sh in /usr/local/etc/rc.d so it autostarts AFTER pfsense finishes its startup processes. Copy the script to say the /root folder. In my case, I add it to /root/custom/scripts since I have to run scripts after every update so it updates my files for my build. Then manually add it to your config.xml under earlyshellcmd section. You can add the 'shellcmd' package and add it via the gui interface.

This way the watchdogd will start before core processes and interfaces are started.

Last night I was messing around with snort and was rebooting the box a lot… On one reboot, I get a panic after it started OpenNTPD for some reason...16 seconds later, the box rebooted... If the watchdog started when the normal autostart scripts started, it would had never rebooted.

_igor_

ah, i had that too. So i changed watchdog settings to:

bmc-watchdog -d -i 20 -e 16
```.

That helped. Since this change no more unsolicited boots. Seems to be that on heavy config reads/writes the watchdog gets its updates too late. Hope that helps you. good luck!

_igor_

Exists there any way to get that file as an entry in the menu (http://forum.pfsense.org/index.php/topic,34056.msg188926.html#msg188926)?
It would be nice to have that info "at a mouse-click". Thanks for any help to do this!

Cino

Open file /usr/local/www/fbegin.inc and add this line of code under the "//Diagnostics" section (around line 180)

$diagnostics_menu[] = array("IPMP Sensors", "/diag_ipmi-sensors.php" );

Now any firmware/gitsync will erase this change, so you will have to add it back.

jimp

Add it into your config.xml

	 <installedpackages>[...]

<menu>
			<name>IPMP Sensors</name>
			<tooltiptext>IPMP Sensors</tooltiptext>
			Diagnostics
			<url>/diag_ipmi-sensors.php</url>
		</menu>

		[...]</installedpackages>

No code hacks, and it'll never go away.

_igor_

Thanks a lot!

Cino

Thanks Jimp!!! I'm always learn something new from you :-)

_igor_

one more question: after adding the item to the config.xml, do i have to reboot or is there a manual way to get the menus reloaded to get the new entry shown?
Thanks again for your help!

jimp

If you just restore the config it may force a reboot. If you edit it in live on the box in the gui, then rm /tmp/config.cache

If you edit it from the console with viconfig, it will do that automatically and should show up next time you refresh the page in the browser.

_igor_

Another change i did, which is cosmetic:

in the "diag_ipmi-sensors.php" i changed the call of the sensors from

$text = `/usr/local/sbin/ipmi-sensors`

to

$text = `/usr/local/sbin/ipmi-sensors | sed 's/\[Unrecognized\ State\].*/\ /'`;

So the final entry of the ipmi-sensors output doesn't have the multiple "[Unrecognized State]" occurencies which destroy the page-layout. Its a crude hack, but works - with the Supermicro board.

And again thanks jimp for your quick answer to reload the menu! Great! That makes test changes quickly.

MrKoen

Good stuff guys! I have updated my article to raise the hearbeat (although it worked fine for me) and added instructions how to add the diagnostics menu item.

Keep up the good work!

Cino

Thanks for the code change igor!! I've been meaning to play with it as I didn't like the spacing either.

_igor_

Sorry for being somewhat active the last days, but i did a bit more looking about and ended with this:

$text = `/usr/local/sbin/ipmi-sensors | sed -e 's/\[[^P].*\]*/\[OK\]/' -e 's/\:\ /\:\t/g'`;

it reproduces now the following output:

edit: the regex has an error, it should be this:```
's/[[^PO].*]//' -e 's/:\ /:\t/g'


![ipmi-sensors.gif](/public/_imported_attachments_/1/ipmi-sensors.gif)
![ipmi-sensors.gif_thumb](/public/_imported_attachments_/1/ipmi-sensors.gif_thumb)

Cino

i like the new format!! thanks again..

I wish i could get my box down to 32c/27c i'm running 56c/63c….

MrKoen

Nice temperatures indeed. Mine is at about 48 degrees Celsius though it being totally passive cooled without a single fan.