Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Watchguard Firebox X Peak platform

    Hardware
    18
    155
    106.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mmiller
      last edited by

      I'll also second that the em gige interfaces work fine.  I tried using a 1 gig CF card and it wouldn't boot from it.  I'm currently booting off a 512 mb CF card.  I'm thinking I can move some of the storage off to a hard drive.  What success has everyone had with that option?  I would really like to get a 4 gig CF card working with out having to load a new bios image.  Does anyone have a list of known working CF cards?

      1 Reply Last reply Reply Quote 0
      • F
        fastcon68
        last edited by

        I am using sandisk CF cards.  I have not had any issues.
        RC

        1 Reply Last reply Reply Quote 0
        • M
          mmiller
          last edited by

          What side of sandisk CF?

          1 Reply Last reply Reply Quote 0
          • M
            mmiller
            last edited by

            Steve,

            I'm interested to know which firebox platforms you are  running.  Also what is the max amount of ram that you think I could stick into my X8000?

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Already answered that.  ;)
              @stephenw10:

              The 875p chipset supports up to 4GB in 4 dimm slots. However the X-peak motherboard only has two slots (although it has space for 4 if you're feeling brave with a soldering iron!) so I would say 2GB.
              Reference: here.
              Steve

              I have 512MB in my X-Peak box and it's more than enough.

              I use the X6000 as my main router and experiment with the others, X750E and now X5500E.

              Steve

              1 Reply Last reply Reply Quote 0
              • F
                fastcon68
                last edited by

                I am using a Ultra Compact Flash 30/s 4GB SANDISK.
                RC

                1 Reply Last reply Reply Quote 0
                • F
                  fastcon68
                  last edited by

                  I was looking at a picture that stephenw10 posted.  It shows a ide laptop drive installed in the hard drive bay on a x6/7/8 000 unit.  Not sure which model he has.  what adapter did he use to connect the ide laptop drive to the use hard drive bay.
                  RC

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    The adapter came with the caddy but they are available separately. I just searched for 'laptop hard disk adapter' on Ebay until I found something that looked right.
                    That image is labelled compaq-hp adapter but I have seen them in Acer laptops too.

                    I have used 2GB Sony and, currently, 4GB Transend CF cards. Cheapest I could get!  ;) There is no point is buying a super fast UDMA card.

                    Steve

                    Edit: The X-Peak will boot a 4GB card with the default bios settings. No need to access the bios.

                    1 Reply Last reply Reply Quote 0
                    • M
                      mmiller
                      last edited by

                      Steve,

                      Thanks I'll try looking for dirt cheap 4 gig CF card.  I tried one that I thought was not a UDMA one and it didn't work.  Now I need to find a cheap 20 Gig laptop hard drive.

                      1 Reply Last reply Reply Quote 0
                      • M
                        mmiller
                        last edited by

                        So I went looking on amazon for 4gb CF cards and these where my  only options.  Should I be looking on ebay for a older one?  Can you post a picture of the CF card that is 4gb in size that works?

                        The second image you can't see so well is 15 MB/s vs the one on the top that I don't think will work which is 30MB/s.

                        sandiskultra4gb.jpg
                        sandiskultra4gb.jpg_thumb
                        sandiskultraii4gb.jpg
                        sandiskultraii4gb.jpg_thumb

                        1 Reply Last reply Reply Quote 0
                        • F
                          fastcon68
                          last edited by

                          I have the first one and it works like a champ in my x500.
                          RC

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Hmmm, it should boot a udma card ok it just won't use udma mode.

                            I can't remember now if I had to disable udma in the bios.  :-\

                            Newegg have the Transend cards if you're in the US.
                            http://www.newegg.com/Product/Product.aspx?Item=N82E16820208339&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle--Memory+%28Flash+Memory%29--Transcend-_-20208339

                            Steve

                            Edit: Nope, it booted the Sony 2GB UDMA card with standard bios settings.

                            1 Reply Last reply Reply Quote 0
                            • F
                              fastcon68
                              last edited by

                              stephenw10,
                              what is the correct procedure for install for installing to a HD that I am going to put into my x6000.  I have sata drives available and 1 full size drive available.  I got a 4 GB CF card, I really want to do a full installation.  Do I need to locate a IDE drive?  I really like to get it on a HD instead of flash.  I have several packages that I want to install and 4GB is not enough space.
                              RC

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                The best way is to use the correct caddy, see my much earlier post, to hold a 2.5" IDE drive. There is a standard IDE connector you can use to hook up a 3.5" IDE drive but the PSU doesn't provide a power connector so you would have do some modding. You could use a SATA to PATA converter.
                                What packages do you want to install that need more than 4GB?

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • F
                                  fastcon68
                                  last edited by

                                  stephenw10,
                                  One of my daughters accounts got hacked.  I wanted to add snort and two other packages that show up in the full install.  I just being proactive and trying to build a better box to protect my family.
                                  RC

                                  1 Reply Last reply Reply Quote 0
                                  • F
                                    fastcon68
                                    last edited by

                                    stephenw10,
                                    I just got off ebay and they did not have any of the correct adapters listed in for sale.  Does anybody have a spare one that they are willing to part with?
                                    RC

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      I bought it with the caddy. Complete caddies with an adapter are available in the UK:
                                      http://cgi.ebay.co.uk/Hard-Drive-Caddy-Kit-Advent-7081-Patriot-2005-ECS-G320-/250815813030?pt=UK_Computing_LaptopAccess_RL&hash=item3a65c995a6

                                      Steve

                                      1 Reply Last reply Reply Quote 0
                                      • M
                                        mmiller
                                        last edited by

                                        I ordered the connector for the IDE 40 pin interface to the strange connector.  I didn't get a chance over the weekend to see if it will fit. It sure looks like the correct part I'll find out today or tomorrow and update this thread.  The part is listed as a "Hard Drive IDE Interposer Adapter Connector".  I had to order a drive sled from the UK it was $15.00 US plus some shipping.  The source for the sled was from the UK. You should be able to search for "Advent 7094 Hard Disk Drive Caddy HDD".  You can PM me if you would like for the URL to the listing that I found.

                                        1 Reply Last reply Reply Quote 0
                                        • M
                                          mmiller
                                          last edited by

                                          Well in my quest to get a driver for SafeXcel 1841 chip.  I received a reply today from safenet today.  It looks like they sold off the "Embedded Security Solutions Division product line".  That new company is AuthenTec Inc.  I have now contacted them to find out if they have a driver for FreeBSD.  I'm sure they do if they have one for Linux.

                                          1 Reply Last reply Reply Quote 0
                                          • F
                                            fastcon68
                                            last edited by

                                            I just got my x6000 in today a day early!  I just got it up and running and the lcd by stephen10 installed.  It is working like a charm.  I have have a few issues with auto-negotiation.  If that is my only problem that is not a big one.

                                            I connected a Tenda W311U wireless USB dongle, and so far I have not been able get to detect it.

                                            RC

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post