UNTUK GAME ONLINE MASUK SINI !!!!!!!!!

poscom

pake lusca jg ga masalah tanpa ini –>acl game dst 203.89.146.0/24. hanya buka portnya aja.
tp klo di tempat sy masalahnya klo pake proxy filter block porno aktif PB mental... ga mau masuk

abnisrea

poscom tolong cara buka portnya gemana….?

poscom

@abnisrea:

poscom tolong cara buka portnya gemana….?

buka port biasa dr rules tp intalan lusca jangan di tambah2in (oprek dan aplikasi pkg lainnya sperti proxy filter) biasa aja.
Luna,PB,ayo dance,atlantica,dotta lancar.

klo config sy ga pake apa2 karena sy jg belum paham pake yg lain lainnya:

http_port 110.1xx.x.x:3128 http11 transparent
http_port 127.0.0.1:80 http11 transparent
icp_port 0

pid_filename /var/run/squid.pid
cache_effective_user proxy
cache_effective_group proxy
error_directory /usr/local/etc/squid/errors/English
icon_directory /usr/local/etc/squid/icons
visible_hostname sorrow
cache_mgr sorrowdee@yahoo.com
access_log /var/squid/logs/access.log
cache_log /var/squid/logs/cache.log
cache_store_log none
logfile_rotate 1
shutdown_lifetime 0 seconds

Allow local network(s) on interface(s)

acl localnet src 110.1xx.x.0/255.255.255.0
server_http11 on
uri_whitespace strip
dns_nameservers 127.0.0.1

cache_mem 128 MB
maximum_object_size_in_memory 64 KB
memory_replacement_policy heap GDSF
cache_replacement_policy heap LFUDA

cache_dir aufs /var/squid/cache 80000 16 256
minimum_object_size 0 KB
maximum_object_size 50 MB
offline_mode off
cache_swap_low 97
cache_swap_high 98

No redirector configured

Setup some default acls

acl all src 0.0.0.0/0.0.0.0
acl localhost src 127.0.0.1/255.255.255.255
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901 99 3128 1025-65535
acl sslports port 443 563 99
acl manager proto cache_object
acl purge method PURGE
acl connect method CONNECT
acl partialcontent_req req_header Range .*
#acl dynamic urlpath_regex cgi-bin ?
include /usr/local/etc/squid/include.conf
acl allowed_subnets src 110.1xx.x.0/24
#cache deny dynamic
http_access allow manager localhost

Allow external cache managers

acl ext_manager_1 src 192.168.1.1
http_access allow manager ext_manager_1

http_access deny manager
http_access allow purge localhost
http_access deny purge
http_access deny !safeports
http_access deny CONNECT !sslports

Always allow localhost connections

http_access allow localhost

quick_abort_min 32 KB
quick_abort_max 128 KB
quick_abort_pct 75
range_offset_limit 0 MB
request_body_max_size 0 allow all
reply_body_max_size 0 deny all

delay_pools 1
delay_class 1 2
delay_parameters 1 -1/-1 -1/-1
delay_initial_bucket_level 100

Throttle extensions matched in the url

acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl"
delay_access 1 allow throttle_exts
delay_access 1 deny all

Custom options

zph_mode tos
zph_local 0x04
zph_parent 0
zph_option 136

Allow local network(s) on interface(s)

http_access allow localnet
http_access allow allowed_subnets

Default block all to be sure

http_access deny all
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
spek LUSCA dan 13User : AMD Athlon 64 X2 Dual Core Processor 4800+ PCI exp 256MB, ram 1gb.klo lusca ram2gb
sy pasang 1 mega paket shared 202.51.207.27 Rp.750rb.

dan yg satunya paket 1mega spidol spek LUSCA dan user pc-chip onboard ram 512mb, klo lusca2gb. 10user bisa juga

poscom

ping Ijo –-> Gipangdee

ini yg maen lagi rame

![PB ping ijo.JPG](/public/imported_attachments/1/PB ping ijo.JPG)
![PB ping ijo.JPG_thumb](/public/imported_attachments/1/PB ping ijo.JPG_thumb)

poscom

hanya menambahkan saja

untuk games, klo bandwidth kita kecil kita harus di manage cekek buat browsing,download dll.. pentingkan untuk games
liat pembagiannya misal 1mb speedy untuk berapa client user?… test dulu, kebagi ga? klo ga kebagi berarti kecilkan untuk browser (kalo perlu ga bisa browsing... he..he..)
makanya kalo awal runing lusca buka aja dulu biar cepet banyak cachenya, tar baru di throttle (limit per user)

test yang dibawah ini:
delay_pools
delay_body
throttle ...

seperti pak moderator bilang spek hardware vga dll disisi client penting. di cache juga penting.
karena walaupun ping hijau di PB klo spek vga kurang (apalagi onboard) maen nyangkut terus....

romee13

gan, di warnet ane banyak yang main seafight, biar loadingnya cepet gmn ngaturnya ya? lusca g bisa neg cache seafight ya? kl youtube bisa di cache.

Noel

untuk bagi bandwitchnya gmna yach antara game, browsing ma download…
supaya semuanya kebagian sesuai porsinya..
terima kasih..

abnisrea

Untuk rekan2 newbie yg menggunakan squid transparent gagal patch ayodance harap dicoba cara ini menggunakan putty console

squidclient -p 80 -m PURGE http://122.102.49.132/audition/Update.ini

semoga bermanfaat
suskes pfsense indonesia

abnisrea

Tambahan lagi … Untuk rekan2 newbie yg menggunakan squid transparent gagal patch crossfire atau ada error spt gmbr dibawah ini :
harap dicoba cara ini menggunakan putty console

squidclient -p 80 -m PURGE http://patch.crossfire.web.id/download/version.ini

semoga bermanfaat
suskes pfsense indonesia

crossfire.JPG_thumb

abnisrea

Tambahan lagi … Untuk rekan2 newbie yg menggunakan squid transparent gagal patch sealindo harap dicoba cara ini menggunakan putty console

squidclient -p 80 -m PURGE http://patch.sealindo.com/patch/normal/version.ini

semoga bermanfaat
suskes pfsense indonesia

queues

bro… saya sdh ikutin settingan dari halaman pertama.. agar kita tau lusca sudah berjalan dengan baik, caranya bagaimana>

Om_antoDIGIT tolong diterawang file /tmp/rules.debug saya doong.

#System aliases

loopback = "{ lo0 }"
WAN = "{ pppoe0 }"
LAN = "{ rl0 }"

#SSH Lockout Table
table <sshlockout>persist
table <webconfiguratorlockout>persist
#pfSnortSam tables
table <snort2c>table <pfsnortsamout>table <pfsnortsamin>table <virusprot># User Aliases
Port_game_TCP = "{ 18900:18910 1818 39100:39220 49100 40000:40010 7777 19101 27780 29000 22100 5121 6000:6152 2001 9601:9602 8085 11011:11041 13413 19000 5105 10009 5340:5352 6000:6001 29200 10402 9600 15000:15002 16402:16502 3010 11031 4300 11005 6900 6112 14800 23800 13008:13009 16666 28012 5126 15001:15002 12011 12110 1202 7341:7350 7451 8421 6215:6217 12009 14004 }"
Port_game_UDP = "{ 40000:40010 9601:9602 11100:11125 11440:11460 12110 15002 7808:30000 12020:12080 13000:13080 42051:42052 }"

Gateways

GWwan = " route-to ( pppoe0 125.161.156.1 ) "

set loginterface rl0
set optimization normal
set limit states 46000
set limit src-nodes 46000

set skip on pfsync0

scrub in on $WAN all fragment reassemble
scrub in on $LAN all fragment reassemble

nat-anchor "natearly/"
nat-anchor "natrules/"

Outbound NAT rules

Subnets to NAT

tonatsubnets = "{ 192.168.222.0/29 127.0.0.0/8 }"
nat on $WAN from $tonatsubnets port 500 to any port 500 -> 125.161.159.233/32 port 500
nat on $WAN from $tonatsubnets to any -> 125.161.159.233/32 port 1024:65535

Load balancing anchor

rdr-anchor "relayd/*"

TFTP proxy

rdr-anchor "tftp-proxy/*"
table <direct_networks>{ 125.161.159.233/32 192.168.222.0/29 }

Setup Squid proxy redirect

rdr on rl0 proto tcp from any to !(rl0) port 80 -> 127.0.0.1 port 80

UPnPd rdr anchor

rdr-anchor "miniupnpd"

anchor "relayd/*"
#–-------------------------------------------------------------------------

default deny rules

#---------------------------------------------------------------------------
block in log all label "Default deny rule"
block out log all label "Default deny rule"

We use the mighty pf, we cannot be fooled.

block quick proto { tcp, udp } from any port = 0 to any
block quick proto { tcp, udp } from any to any port = 0

Block all IPv6

block in quick inet6 all
block out quick inet6 all

pfSnortSam

block quick from <snort2c>to any label "Block snort2c hosts"
block quick from any to <snort2c>label "Block snort2c hosts"
block quick from <pfsnortsamout>to any label "Block pfSnortSamOut hosts"
block quick from any to <pfsnortsamin>label "Block pfSnortSamIn hosts"

SSH lockout

block in log quick proto tcp from <sshlockout>to any port 22 label "sshlockout"

webConfigurator lockout

block in log quick proto tcp from <webconfiguratorlockout>to any port 80 label "webConfiguratorlockout"
block in quick from <virusprot>to any label "virusprot overload table"
table <bogons>persist file "/etc/bogons"

block bogon networks

http://www.cymru.com/Documents/bogon-bn-nonagg.txt

block in log quick on $WAN from <bogons>to any label "block bogon networks from WAN"
antispoof for pppoe0

block anything from private networks on interfaces with the option set

antispoof for $WAN
block in log quick on $WAN from 10.0.0.0/8 to any label "block private networks from wan block 10/8"
block in log quick on $WAN from 127.0.0.0/8 to any label "block private networks from wan block 127/8"
block in log quick on $WAN from 172.16.0.0/12 to any label "block private networks from wan block 172.16/12"
block in log quick on $WAN from 192.168.0.0/16 to any label "block private networks from wan block 192.168/16"
antispoof for rl0

loopback

pass in on $loopback all label "pass loopback"
pass out on $loopback all label "pass loopback"

let out anything from the firewall host itself and decrypted IPsec traffic

pass out all keep state allow-opts label "let out anything from firewall host itself"
pass out route-to ( pppoe0 125.161.156.1 ) from 125.161.159.233 to !125.161.159.233/32 keep state allow-opts label "let out anything from firewall host itself"

make sure the user cannot lock himself out of the webConfigurator or SSH

pass in quick on rl0 proto tcp from any to (rl0) port { 80 22 } keep state label "anti-lockout rule"

User-defined rules follow

pass out proto udp from any to any queue (qVoIP) label "USER_RULE: DiffServ/Lowdelay/Upload"
pass out proto tcp from any to any port 6880 >< 7000 queue (qP2P) label "USER_RULE: m_P2P BitTorrent outbound"
pass out proto udp from any to any port 6880 >< 7000 queue (qP2P) label "USER_RULE: m_P2P BitTorrent outbound"
pass out proto tcp from any to any port 3389 queue (qOthersDefault,qACK) label "USER_RULE: m_Other MSRDP outbound"
pass out proto tcp from any to any port 5899 >< 5931 queue (qOthersDefault,qACK) label "USER_RULE: m_Other VNC outbound"
pass out proto tcp from any to any port 3283 queue (qOthersDefault,qACK) label "USER_RULE: m_Other AppleRemoteDesktop1 outbound"
pass out proto tcp from any to any port 5900 queue (qOthersDefault,qACK) label "USER_RULE: m_Other AppleRemoteDesktop2 outbound"
pass out proto udp from any to any port 3283 queue (qOthersDefault) label "USER_RULE: m_Other AppleRemoteDesktop3 outbound"
pass out proto udp from any to any port 5900 queue (qOthersDefault) label "USER_RULE: m_Other AppleRemoteDesktop4 outbound"
pass out proto tcp from any to any port 5631 queue (qOthersDefault,qACK) label "USER_RULE: m_Other pcany1 outbound"
pass out proto udp from any to any port 5632 queue (qOthersDefault) label "USER_RULE: m_Other pcany2 outbound"
pass out proto tcp from any to any port 6666 >< 6671 queue (qOthersDefault,qACK) label "USER_RULE: m_Other IRC outbound"
pass out proto tcp from any to any port 5222 queue (qOthersDefault,qACK) label "USER_RULE: m_Other IRC outbound"
pass out proto tcp from any to any port 5223 queue (qOthersDefault,qACK) label "USER_RULE: m_Other IRC outbound"
pass out proto tcp from any to any port 5269 queue (qOthersDefault,qACK) label "USER_RULE: m_Other IRC outbound"
pass out proto tcp from any to any port 5190 queue (qOthersDefault,qACK) label "USER_RULE: m_Other ICQ1 outbound"
pass out proto udp from any to any port 5190 queue (qOthersDefault) label "USER_RULE: m_Other ICQ2 outbound"
pass out proto tcp from any to any port 5190 queue (qOthersDefault,qACK) label "USER_RULE: m_Other AIM outbound"
pass out proto tcp from any to any port 1863 queue (qOthersDefault,qACK) label "USER_RULE: m_Other MSN1 outbound"
pass out proto tcp from any to any port 6890 >< 6901 queue (qOthersDefault,qACK) label "USER_RULE: m_Other MSN2 outbound"
pass out proto tcp from any to any port 6901 queue (qOthersDefault,qACK) label "USER_RULE: m_Other MSN3 outbound"
pass out proto udp from any to any port 6901 queue (qOthersDefault) label "USER_RULE: m_Other MSN4 outbound"
pass out proto tcp from any to any port 14534 queue (qOthersDefault,qACK) label "USER_RULE: m_Other teamspeak1 outbound"
pass out proto tcp from any to any port 51234 queue (qOthersDefault,qACK) label "USER_RULE: m_Other teamspeak2 outbound"
pass out proto udp from any to any port 8766 >< 8769 queue (qOthersDefault) label "USER_RULE: m_Other teamspeak3 outbound"
pass out proto tcp from any to any port 1723 queue (qOthersDefault,qACK) label "USER_RULE: m_Other PPTP outbound"
pass out proto gre from any to any queue (qOthersDefault) label "USER_RULE: m_Other PPTPGRE outbound"
pass out proto udp from any to any port 500 queue (qOthersDefault) label "USER_RULE: m_Other IPSEC outbound"
pass out proto ah from any to any queue (qOthersDefault) label "USER_RULE: m_Other IPSEC outbound"
pass out proto esp from any to any queue (qOthersDefault) label "USER_RULE: m_Other IPSEC outbound"
pass out proto tcp from any to any port 7999 >< 8101 queue (qOthersDefault,qACK) label "USER_RULE: m_Other STREAMINGMP3 outbound"
pass out proto tcp from any to any port 554 queue (qOthersDefault,qACK) label "USER_RULE: m_Other RTSP1 outbound"
pass out proto tcp from any to any port 80 queue (qOthersHigh,qACK) label "USER_RULE: m_Other HTTP outbound"
pass out proto tcp from any to any port 443 queue (qOthersHigh,qACK) label "USER_RULE: m_Other HTTPS outbound"
pass out proto tcp from any to any port 25 queue (qOthersLow,qACK) label "USER_RULE: m_Other SMTP outbound"
pass out proto tcp from any to any port 110 queue (qOthersLow,qACK) label "USER_RULE: m_Other POP3 outbound"
pass out proto tcp from any to any port 143 queue (qOthersLow,qACK) label "USER_RULE: m_Other IMAP outbound"
pass out proto tcp from any to any port 1352 queue (qOthersLow,qACK) label "USER_RULE: m_Other LotusNotes1 outbound"
pass out proto udp from any to any port 1352 queue (qOthersLow) label "USER_RULE: m_Other LotusNotes2 outbound"
pass out proto tcp from any to any port 53 queue (qOthersHigh,qACK) label "USER_RULE: m_Other DNS1 outbound"
pass out proto udp from any to any port 53 queue (qOthersHigh) label "USER_RULE: m_Other DNS2 outbound"
pass out inet proto icmp from any to any queue (qOthersDefault) label "USER_RULE: m_Other ICMP outbound"
pass out proto tcp from any to any port 445 queue (qOthersDefault,qACK) label "USER_RULE: m_Other SMB1 outbound"
pass out proto tcp from any to any port 136 >< 140 queue (qOthersDefault,qACK) label "USER_RULE: m_Other SMB2 outbound"
pass out proto tcp from any to any port 161 queue (qOthersDefault,qACK) label "USER_RULE: m_Other SNMP outbound"
pass out proto udp from any to any port 161 queue (qOthersDefault) label "USER_RULE: m_Other SNMP2 outbound"
pass out proto tcp from any to any port 3306 queue (qOthersDefault,qACK) label "USER_RULE: m_Other MySQL1 outbound"
pass out proto tcp from any to any port 119 queue (qOthersDefault,qACK) label "USER_RULE: m_Other NNTP1 outbound"
pass out proto udp from any to any port 119 queue (qOthersDefault) label "USER_RULE: m_Other NNTP2 outbound"
pass out proto tcp from any to any port 5999 queue (qOthersDefault,qACK) label "USER_RULE: m_Other cvsup outbound"
pass out proto tcp from any to any port 5001 queue (qOthersDefault,qACK) label "USER_RULE: m_Other Slingbox1 outbound"
pass out proto udp from any to any port 5001 queue (qOthersDefault) label "USER_RULE: m_Other Slingbox2 outbound"
pass out proto tcp from any to any port 3000 queue (qOthersDefault,qACK) label "USER_RULE: m_Other HBCI outbound"
pass in quick on $LAN proto tcp from any to any port 1972 flags S/SA keep state queue (qOthersHigh) label "USER_RULE: e-trading"
pass in quick on $LAN proto { tcp udp } from any to any port 53 keep state queue (qOthersHigh) label "USER_RULE: dns"
pass in quick on $LAN proto { tcp udp } from any to any port 5060 keep state queue (qVoIP) label "USER_RULE: nimbuzz"
pass in quick on $LAN proto udp from any to any port 4999 >< 5011 keep state queue (qVoIP) label "USER_RULE: Voice Chat "
pass in quick on $LAN proto { tcp udp } from any to any port 8877 keep state queue (qVoIP) label "USER_RULE: skype"
pass in quick on $LAN proto tcp from any to any port $Port_game_TCP flags S/SA keep state queue (qGames) label "USER_RULE"
pass in quick on $LAN proto udp from any to any port $Port_game_UDP keep state queue (qGames) label "USER_RULE"
pass in quick on $LAN proto tcp from 192.168.222.0/29 to any port 80 flags S/SA keep state queue (qOthersHigh) label "USER_RULE: http not hit s"
pass in quick on $LAN inet proto icmp from 192.168.222.0/29 to any keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto tcp from 192.168.222.0/29 to any port 81 flags S/SA keep state queue (qOthersDefault) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from any to any port 20 keep state queue (qOthersDefault) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from any to any port 21 keep state queue (qOthersHigh) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from any to any port 22 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from any to any port 23 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 25 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 465 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 993 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 587 keep state queue (qOthersLow) label "USER_RULE: smtp"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 110 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto tcp from 192.168.222.0/29 to any port 443 flags S/SA keep state queue (qOthersHigh) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 143 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 1755 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 7000 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 993 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 123 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 161 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 3000 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from any to any port 5050 keep state queue (qOthersDefault) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from any to any port 8000 >< 8003 keep state queue (qOthersLow) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from any to any port 4999 >< 5002 keep state queue (qVoIP) label "USER_RULE"
pass in quick on $LAN proto tcp from any to any port 5099 >< 5102 flags S/SA keep state queue (qOthersHigh) label "USER_RULE"
pass in quick on $LAN proto { tcp udp } from 192.168.222.0/29 to any port 58999 >< 61000 keep state queue (qP2P) label "USER_RULE: alokasi port utk P2P"
block in quick on $LAN proto { tcp udp } from 192.168.222.0/29 port 9666 to any label "USER_RULE"
block in quick on $LAN proto { tcp udp } from 192.168.222.0/29 port 8084 to any label "USER_RULE"

VPN Rules

anchor "tftp-proxy/*"

Setup squid pass rules for proxy

pass in quick on rl0 proto tcp from any to !(rl0) port 80 flags S/SA keep state
pass in quick on rl0 proto tcp from any to !(rl0) port 3128 flags S/SA keep state</bogons></bogons></virusprot></webconfiguratorlockout></sshlockout></pfsnortsamin></pfsnortsamout></snort2c></snort2c></direct_networks></virusprot></pfsnortsamin></pfsnortsamout></snort2c></webconfiguratorlockout></sshlockout>

Mohon Pencerahannya
tks…

abnisrea

pake putty console
login : root
pass : suka-suka yg buat

pilih no. 8 (shell) enter

ketik deh salah satu dibawah ini

1. tail -f /var/squid/logs/access.log –> tuk liat aktivitas squid
2. squidclient -p 80 mgr:info --> tuk liat ya mcem2 lah

queues

@abnisrea:

pake putty console
login : root
pass : suka-suka yg buat

pilih no. 8 (shell) enter

ketik deh salah satu dibawah ini

1. tail -f /var/squid/logs/access.log –> tuk liat aktivitas squid
2. squidclient -p 80 mgr:info --> tuk liat ya mcem2 lah

yang no 1 hasilnya

tail: /var/squid/logs/access.log: No such file or directory

yang no 2 hasilnya :

HTTP/1.1 200 OK
Server: Lusca/LUSCA r14850 patched: chudy r14
Date: Fri, 17 Jun 2011 16:28:58 GMT
Content-Type: text/plain
Expires: Fri, 17 Jun 2011 16:28:58 GMT
X-Cache: MISS from localhost
Transfer-Encoding: chunked
Via: 1.0 localhost:3128 (Lusca/LUSCA r14850 patched: chudy r14)
Connection: close

854
Squid Object Cache: Version LUSCA r14850 patched: chudy r14
Start Time: Fri, 17 Jun 2011 02:36:21 GMT
Current Time: Fri, 17 Jun 2011 16:28:58 GMT
Connection information for squid:
Number of clients accessing cache: 3
Number of HTTP requests received: 20749
Number of ICP messages received: 0
Number of ICP messages sent: 0
Number of queued ICP replies: 0
Request failure ratio: 0.00
Average HTTP requests per minute since start: 24.9
Average ICP messages per minute since start: 0.0
Select loop called: 2862271 times, 17.453 ms avg
Cache information for squid:
Request Hit Ratios: 5min: 22.9%, 60min: 13.5%
Byte Hit Ratios: 5min: 7.0%, 60min: 3.5%
Request Memory Hit Ratios: 5min: 5.1%, 60min: 26.4%
Request Disk Hit Ratios: 5min: 17.9%, 60min: 22.1%
Storage Swap size: 281228 KB
Storage Mem size: 85012 KB
Mean Object Size: 20.76 KB
Requests given to unlinkd: 0
Median Service Times (seconds) 5 min 60 min:
HTTP Requests (All): 0.14252 0.37825
Cache Misses: 0.35832 0.52331
Cache Hits: 0.00194 0.00179
Near Hits: 2.25116 0.15888
Not-Modified Replies: 0.00000 0.00000
DNS Lookups: 0.00000 0.00000
ICP Queries: 0.00000 0.00000
Resource usage for squid:
UP Time: 49956.441 seconds
CPU Time: 164.668 seconds
CPU Usage: 0.33%
CPU Usage, 5 minute avg: 0.49%
CPU Usage, 60 minute avg: 0.48%
Process Data Segment Size via sbrk(): 0 KB
Maximum Resident Size: 194880 KB
Page faults with physical i/o: 1
Memory accounted for:
Total accounted: 96820 KB
memPoolAlloc calls: 4545054
memPoolFree calls: 4248515
File descriptor usage for squid:
Maximum number of file descriptors: 58982
Largest file desc currently in use: 162
Number of file desc currently in use: 28
Files queued for open: 0
Available number of file descriptors: 58954
Reserved number of file descriptors: 100
Store Disk files open: 3
IO loop method: kqueue
Internal Data Structures:
13709 StoreEntries
11173 StoreEntries with MemObjects
11167 Hot Object Cache Items
13548 on-disk objects

0

berjalan gak ya luscanya?

abnisrea

Udah jalan Lusca nya

mungkin harus pake

tail -f /var/squid/log/access.log –> tuk liat aktivitas squid

(settingan om anto_digit ya) dicoba ya..

queues

pak abnisrea dan rekan2 disini, sdh pernah ada yang create server games DOTA di PfSense?

detrackmx

@romee13:

gan, di warnet ane banyak yang main seafight, biar loadingnya cepet gmn ngaturnya ya? lusca g bisa neg cache seafight ya? kl youtube bisa di cache.

bisa kok lusca melakukan cache…..warnet ane lancar2 aja...tapi inget banyak virusnya itu game,masuk ke cache virusnya...jadi avira harus enable.

queues

@detrackmx:

bisa kok lusca melakukan cache…..warnet ane lancar2 aja...tapi inget banyak virusnya itu game,masuk ke cache virusnya...jadi avira harus enable.

kalau untuk create server DOTA bisa pak?

abnisrea

Memperlambat Laju Video pada PfSense bagi yg kekurangan bandwith

Untuk memperlambat laju Video baik dari Youtub dan lainnya adalah dengan cara menambahkan delay pool pada custom option. contoh

acl bad_sites url_regex -i youtube.com redtube.com porn.com –> masukkan link yg akan di perlambat
delay_pools 1
delay_class 1 1
delay_access 1 allow bad_sites
delay_parameters 1 64000/8192

abnisrea

Proxy server: General settings

Custom Options

Custom Option ku pd pfsense
Karena bandwidth aku prihatin aku coba-coba rubah PpSense kesayanganku Custom Option di Lusca ku
dan hasilnya cukup memuaskan dmana dengan Bandwidth 1M dari Spidol dapat dibagi untuk 20 Unit Client..

acl admin src 192.168.1.2/255.255.255.255;
acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl";
acl bad_sites url_regex -i youtube.com porn.com;
delay_pools 3;
delay_class 1 1;
delay_parameters 1 -1/-1;
delay_access 1 allow admin;
delay_access 1 deny all;
delay_class 2 1;
delay_parameters 2 49152/16384;
delay_access 2 allow bad_sites;
delay_access 2 deny all;
delay_class 3 1;
delay_parameters 3 12288/8192;
delay_initial_bucket_level 100;
delay_access 3 allow throttle_exts;
delay_access 3 deny all;
#zph_mode tos;
#zph_local 0x04;
#zph_parent 0;
#zph_option 136;
acl HTML url_regex .ini$;
no_cache deny HTML;
acl XYZZY url_regex ^http://122.102.49.132/audition/Update.ini$;
acl XYZZY url_regex ^http://patch.crossfire.web.id/download/version.ini$;
acl XYZZY url_regex ^http://patch.sealindo.com/patch/normal/version.ini$;

anto_DIGIT

Rekan2 ada yang tahu port utk game Ayodance ? ;D
selain TCP 18900:18909