Howto set the 'm1n1wall' to 'total factory defaults'?
-
the rev. 1.2.3-RELEASE
i do not have the 'null-modem'-cable -
… also i'll have to say - i can't access to it via 'web-interface'
-
I'd say get a null modem cable.
Alternatively reflash the whole thing and start from scratch.
-
On 1.2.3 you'll need to use the serial console to access it to reset the config to default.
On 2.0 you just need to hold in the little reset button for ~30s while it boots
-
ok - tnx :: i did try out that 'reset button' with several limit of time, without
success - so i made a 'null-modem'