Cant access router when connected via PPTP
-
On the pfSense gui, go to Diagnostics > Packet capture. Run a capture there, on LAN, filtered on .4.
Then ping the router from the PPTP-connected system, then stop the capture, and see what you got.
Don't ping from the firewall's GUI
-
Ok thanks. I first pinged 192.168.10.1 and 10.235 as i know these i can access, then i did 10.2, which i believe shows nothing in the packet capture:
21:22:21.146768 IP 192.168.10.4 > 192.168.10.235: ICMP echo request, id 1, seq 31, length 40
21:22:24.712641 ARP, Request who-has 192.168.10.4 tell 192.168.10.235, length 46
21:22:24.712659 ARP, Reply 192.168.10.4 is-at c8:3a:35:d2:53:cf, length 28
21:22:25.683589 ARP, Request who-has 192.168.10.4 tell 192.168.10.235, length 46
21:22:25.683607 ARP, Reply 192.168.10.4 is-at c8:3a:35:d2:53:cf, length 28
21:22:25.841092 IP 192.168.10.4 > 192.168.10.235: ICMP echo request, id 1, seq 32, length 40
21:22:26.683659 ARP, Request who-has 192.168.10.4 tell 192.168.10.235, length 46
21:22:26.683677 ARP, Reply 192.168.10.4 is-at c8:3a:35:d2:53:cf, length 28
21:22:29.351288 IP 192.168.10.235 > 192.168.10.4: ICMP echo reply, id 1, seq 32, length 40
21:22:29.354802 IP 192.168.10.235 > 192.168.10.4: ICMP echo reply, id 1, seq 32, length 40
21:22:29.371934 IP 192.168.10.235 > 192.168.10.4: ICMP echo reply, id 1, seq 32, length 40
21:22:29.675635 IP 192.168.10.4 > 192.168.10.235: ICMP echo request, id 1, seq 33, length 40
21:22:31.450664 IP 192.168.10.235 > 192.168.10.4: ICMP echo reply, id 1, seq 33, length 40
21:22:31.818773 IP 192.168.10.4 > 192.168.10.235: ICMP echo request, id 1, seq 34, length 40
21:22:32.597950 IP 192.168.10.235 > 192.168.10.4: ICMP echo reply, id 1, seq 34, length 40 -
If you never see the ping for .2 in the capture, that means it never left LAN. Either it never left the laptop, or it was blocked/misrouted somewhere along the way. Double check your firewall rules for pptp, firewall logs, etc.
-
when i tried to ping .2 it just "request timed out"
I have no idea how to setup firewall rules.. shouldnt it just work seeing i can access the other devices on the same subnet? the antennas for example.. they are all in Wireless ISP mode, they are basically routers also
-
That depends on your rulesโฆ For all we know, since you haven't said, there is a block rule on there or an incorrect rule to pass to it. Show a screenshot of your PPTP rules.
-
Ok, here it is
-
That should be fine then. Though just for giggles, change the source to 'any' and see what happens.
-
Definately would have been nice if it was that simple!! but unfortunately that didnt work.. :)
Should i change it back to PPTP or is any how it should be?
I have no idea why i cant get to this stupid router!ย Its GUI is https, thats not an issue is it?
-
Only would be an issue if you can't access any other https items across the vpn, but a ping isn't going either.
Somehow you need to determine if it's ever leaving the laptop and even trying to go over pptp. Try a traceroute to it.
-
Is this .2 in the same lan, so it's for sure in correct switch.
is switch configs correct
is the switch port functioning at all, even those can break down -
Yes it is, and from within the office i can get to it, just cant when connected via PPTP from my home.
I also found out lastnight that i can't access it when i connect to another server via Teamviewer from home.. same problem.. all other devices with Webgui on the 192.168.10.0 subnet i can access.. just not this one in particular..