New HOWTO: pfSense Squid Web Proxy with multi-WAN links (it works!)
-
Check "quick" on that rule.
-
Tried that didn't work
-
duplicate the floating rule you made for http traffic, then modify it for dns (proto tcp/udp / port dns=53)
-
All ways not work.
we need standard way work with all , not for one.
very bad. -
Thanks Heper but that also did not work. I'm going to be deploying this later on with a different network (Right now I am just testing) with DNS servers on the LAN so maybe I'll have better luck in that environment. I'll post back as soon as this happens.
Many thanks.
-
Hi you guys, any one have the document ? i cant get it from the url posted.
thanks in advanced.
Regards
-
Hi you guys, any one have the document ? i cant get it from the url posted.
thanks in advanced.
Regards
Solved, the link was down till now.
Thanks
-
Still couldn't get it to work.. failover works great if I don't have Squid running.
-
We need LoadBalancing and FailOVER! squid guys working faster please!
-
@DimitriS
Did you tested this setup in case of loadbalancing?
After my test it perfectly works in case of failover, but not when I set up loadbalancing between two gateways..
I tried to bind squid to loopback and LAN and only loopback, and works well only when gateways sets in failover.Michael
-
I agree with mbedyn, failover works but not loadbalancing.
-
Saw the same thing here. Fail-over yes, load balancing no.
-
same here no loadbalance only failover. Also the redirect error page in squidguard doesn't point to the redirect page.
2.0-RC3 (i386)
built on Wed Jun 22 12:38:11 EDT 2011installed packages: squid, squidguard, bandwidth and vnstati
squid in transparent mode, 2 ISP (dynamic and static WANS)
floating rule set as this:
@zzajdica: -
I tried to follow the HOWTO but it seems I encountered problems:
2.0-RC3 (i386)
built on Fri Jul 1 00:16:18 EDT 2011 -
Good Job
-
Hello.
For three days I'm trying to do this.
I tried and tried, but I can not get it to work.
I can not open web pages it opens and then stops and does not go more 'forward.
I attach a screenshot
As you can see I can not even do program updates.
If anyone can help me, I would do a big favor.
Thanks to all.
-
Screenshot
-
screenshot
-
screenshot
-
what does not work ?
are you able to do basic loadbalancing without squid ?
if no -> read the sticky about loadbalancing / failover in 2.0 forumif yes -> is your floating rule being hit when trying to access a page ? –> if yes then you could be having a dns issue, duplicate the floating rule you have for http but change to tcp/udp and destination to DNS (53)