Config NAT

trunglam

Hi,

I'm running on snapshots 2.0-BETA4 (i386) built on Sun Nov 14 16:48:36 EST 2010 everything ok. Now i need some advice for config NAT

My network like this.

LAN –------------------------|-------Intranet
10.1.2.0/24 | 12.1.2.0/28
|
|---Pfsense-----Internet
VLAN 1 -----------------------|
11.1.2.0/24

Connect from LAN to internet and intranet is ok
Connect from VLAN to internet is ok
Intranet only allow connect from IP LAN

I want make a Source NAT from VLAN1-11.1.2.0/24 to Intranet-12.1.2.0/28 base on IP LAN interface - 10.1.2.1

1 - Create virtual IP, Real IP is LAN's IP
2 - Create new gateway is virtual IP
3 - Make a NAT outbound rule base on LAN interface ( or Virtual IP)
4 - Make a VLAN firewall rule allow connect to Intranet address by Virtual gateway

I also try some others Nat address or rule but still not success.

jlepthien

I do not know if this is possible…

I guess since the IP you want to NAT to exist on your LAN interface that won't work...