Freeradius + EAP Certificates

Nachtfalke

Hi,

everytime I run ./bootstrap I got this error at the end of the client.cnf process

Certificate is to be certified until Jun  4 11:51:20 2021 GMT (3650 days)
failed to update database
TXT_DB error number 2

After this, the client.crt is only 0 bytes - like you could see above.
And because of this I cannot continue with the other openssl commands :(

Any ideas ?

seggerman

Hi Nachtfalke,

try to execute the commands manually (extract from the Makefile):

openssl req -new -out client.csr -keyout client.key -config ./client.cnf

openssl ca -batch -keyfile ca.key -cert ca.pem -in client.csr -key $(PASSWORD_CA) -out client.crt -extensions xpclient_ext -extfile xpextensions -config ./client.cnf

openssl pkcs12 -export -in client.crt -inkey client.key -out client.p12 -passin pass:$(PASSWORD_CLIENT) -passout pass:$(PASSWORD_CLIENT)

where PASSWORD_CA and PASSWORD_CLIENT the respective passwords in your ca.cnf and client.cnf are.

Cheers

Alexander

Nachtfalke

This is the output error - still the same. I do not know where I did something wrong :(

[2.0-RC2][admin@pfsense2.hpa]/usr/local/etc/raddb/certs(8): openssl req -new  -out client.csr -keyout client.key -config ./client.cnf
Generating a 2048 bit RSA private key
.....................................................+++
.........................+++
writing new private key to 'client.key'
-----
[2.0-RC2][admin@pfsense2.hpa]/usr/local/etc/raddb/certs(9): openssl ca -batch -keyfile ca.key -cert ca.pem -in client.csr  -key Passwort -out client.crt -extensions xpclient_ext -extfile xpextensions -config ./client.cnf
Using configuration from ./client.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
        Serial Number: 2 (0x2)
        Validity
            Not Before: Jun  7 15:10:39 2011 GMT
            Not After : Jun  4 15:10:39 2021 GMT
        Subject:
            countryName               = DE
            stateOrProvinceName       = Deutschland
            organizationName          = Polizeiakademie Hessen
            commonName                = freeRADIUS HPA-CA
            emailAddress              = rbs.hpa@polizei.hessen.de
        X509v3 extensions:
            X509v3 Extended Key Usage:
                TLS Web Client Authentication
Certificate is to be certified until Jun  4 15:10:39 2021 GMT (3650 days)
failed to update database
TXT_DB error number 2
[2.0-RC2][admin@pfsense2.hpa]/usr/local/etc/raddb/certs(10): openssl pkcs12 -export -in client.crt -inkey client.key -out client.p12  -passin pass:Passwort -passout pass:Passwort
No certificate matches private key

And here: The client.crt ist still 0 bytes because of the error above …

[2.0-RC2][admin@pfsense2.hpa]/usr/local/etc/raddb/certs(11): ls -la
total 84
drwxr-xr-x  3 root  wheel  1024 Jun  7 17:11 .
drwxr-x---  5 root  wheel  1024 Jun  6 16:16 ..
-rw-r--r--  1 root  wheel    70 Jun  6 16:08 .gitignore
-rw-r-----  1 root  wheel  4260 Jun  7 17:09 01.pem
-rwxrwxrwx  1 root  wheel  4260 Jun  6 22:25 Makefile
-rwxrwxrwx  1 root  wheel  7821 Jun  6 21:08 README
-rwxrwxrwx  1 root  wheel  2642 Jun  7 13:47 bootstrap
-rwxrwxrwx  1 root  wheel  1297 Jun  7 13:41 ca.cnf
-rw-r-----  1 root  wheel  1221 Jun  7 17:09 ca.der
-rw-r-----  1 root  wheel  1751 Jun  7 17:09 ca.key
-rw-r-----  1 root  wheel  1708 Jun  7 17:09 ca.pem
-rwxrwxrwx  1 root  wheel  1134 Jun  7 13:40 client.cnf
-rw-r-----  1 root  wheel     0 Jun  7 17:10 client.crt
-rw-r-----  1 root  wheel  1074 Jun  7 17:10 client.csr
-rw-r-----  1 root  wheel  1743 Jun  7 17:10 client.key
-rw-r--r--  1 root  wheel     0 Jun  7 17:11 client.p12
drwxrwxrwx  2 root  wheel   512 Jun  7 13:24 demoCA
-rw-r-----  1 root  wheel   424 Jun  7 17:09 dh
-rw-r-----  1 root  wheel   134 Jun  7 17:09 index.txt
-rw-r-----  1 root  wheel    21 Jun  7 17:09 index.txt.attr
-rw-r-----  1 root  wheel     0 Jun  7 17:09 index.txt.old
-rw-r-----  1 root  wheel  5120 Jun  7 17:09 random
-rw-r-----  1 root  wheel     3 Jun  7 17:09 serial
-rw-r-----  1 root  wheel     3 Jun  7 17:09 serial.old
-rwxrwxrwx  1 root  wheel  1135 Jun  7 13:40 server.cnf
-rw-r-----  1 root  wheel  4260 Jun  7 17:09 server.crt
-rw-r-----  1 root  wheel  1074 Jun  7 17:09 server.csr
-rw-r-----  1 root  wheel  1751 Jun  7 17:09 server.key
-rw-r-----  1 root  wheel  2557 Jun  7 17:09 server.p12
-rw-r-----  1 root  wheel  3553 Jun  7 17:09 server.pem
-rwxrwxrwx  1 root  wheel   578 Jun  6 21:08 xpextensions

seggerman

Hi Nachtfalke,

you used the "bootstrap" file to create the certificates and I used the make command. I assume that there is some difference. Reading through the README file it states that bootstrap is used to create standard certificate for testing. Maybe some data in the files (index, dh, random ….) do not match the information in the *.cnf files you modified. I would use the makefile.

Can you try a

make destroycerts
make clean
make all
make client

This is what worked for me (just gave it a try).

Regards

Alexander

Nachtfalke

Hi,

the problem is, that in pfsense there is no "make"…command not found.
I think this is "normal" because pfsense is a firewall solution an noone should or needs to compile something.

Perhaps I will try it with the single commands in the "Makefile" or I will test it on a linux live CD.

PS: Do you know if it is possible to do authentication on freeRADIUS using the device MAC address ?
I know freeRADIUS can do this but is it possible with the pfsense freeRADIUS GUI ?
Or do I have to edit the users file manually with different parameters ? I think this is the only way or do you have other experience ?

Nachtfalke

Hi,

I uploaded the files to an Ubuntu live CD and then it works with "make" and "make client"

no errors and files with more than zero bytes and p12 files :-)
Tomorrow I will try it with my pfsense and my switches.

Thank you very much for your help and taking time for my problem!
I will post back if it works or if I expect more problems :D

seggerman

@Nachtfalke:

I uploaded the files to an Ubuntu live CD and then it works with "make" and "make client"

no errors and files with more than zero bytes and p12 files :-)
Tomorrow I will try it with my pfsense and my switches.

… great that everything is there now. Everything else should be a breeze ...

PS: Do you know if it is possible to do authentication on freeRADIUS using the device MAC address ?
I know freeRADIUS can do this but is it possible with the pfsense freeRADIUS GUI ?
Or do I have to edit the users file manually with different parameters ? I think this is the only way or do you have other experience ?

If a MAC authentication is possible, then you definately can do it. You will have to manually edit the necessary files, since there isn't a GUI integration for all the features in freeradius. I personally don't have any experience with this feature.

Cheers

Alexander

Nachtfalke

Hi,

just want to let you know, that I got freeRADIUS on pfsense with my CISCO SG-300 and Windows XP working. The creation of the certificates is much easier under a linux distrubution which has "make" installed than under pfsense ;-)

But now I have another question:
To authenticate to the network I still need a to enter the username and password on the Windows XP machine. The problem is that in my network the PCs are NOT in a domain. They are all workgroup PCs.
And it is common, that many users use the same Windows Logon Name than others and the same password (or no password).

Is it possible to enter (AND SAVE) a custom username and password so that the users do not need to enter them every time they connect to the network ?

I read something about "computer certificates" which work before the use will logon into windows.

Thank you!

seggerman

@Nachtfalke:

Hi,

just want to let you know, that I got freeRADIUS on pfsense with my CISCO SG-300 and Windows XP working. The creation of the certificates is much easier under a linux distrubution which has "make" installed than under pfsense ;-)

But now I have another question:
To authenticate to the network I still need a to enter the username and password on the Windows XP machine. The problem is that in my network the PCs are NOT in a domain. They are all workgroup PCs.
And it is common, that many users use the same Windows Logon Name than others and the same password (or no password).

Is it possible to enter (AND SAVE) a custom username and password so that the users do not need to enter them every time they connect to the network ?

I read something about "computer certificates" which work before the use will logon into windows.

Thank you!

Not quite sure I understand you.

The client certificates are being used for the authentication to the Wifi/Radius Network. I assume this works. As mentioned previously you need to copy the client.p12 and the ca certificate to each client and activate the "certificate authentication" in the wifi settings. This works without additional uid/pw. You have to have TLS (and not TTLS) authentication.

Do you want to have windows logon using a certificate (has nothing to do with wifi/radius)?

REgards

Alexander

Nachtfalke

Hi,

I am not using WiFi.
I would like to authenticate windows machines with certificates against radius. This is working.
If I do not install the client.p12 on the windows machine, I cannot authenticate.

But in Windows I have always to enter a username and a password, if I connect the network cable.
The username/password is the same I have to enter in the freeRADIUS webGUI on pfsense.
Is this different to you ? Don't you have to enter a username/password in the freeRADIUS webGUI ?

Thanks!

seggerman

Hi Nachtfalke,

I'm using Radius+Certificates for the wifi EAP (WPA2) authentication. So this is to allow/disallow access to my wifi network using certificates.

Reading your last posts you it seems as if you want to use a certificate to log on to windows using a Radius server.

I'm sorry, but I cannot help you with that (if I understood your problem correctly)

Cheers

Alexander

Nachtfalke

Hi,

you didn't understand me correct or I didn't explain it correct.

Take a look at this thread:
http://www.administrator.de/index.php?content=154402#644826

Scroll down to the chapter:

Clients für die 802.1x Zugangskontrolle einrichten

After I login into windows, with my username and password I can see the desktop, open word an so on.
If I connect my LAN cable to the switch, there appears a hint in the systray "There are additional information needed to access the network". There I have to enter the username/password I entered in the freeRADIUS users tab on pfsense.

Windows XP allows you to use the same username and password for this authentication as you used for the windows logon. (This you can see in the third and fith picture in the chapter I told you above: (Clients für die 802.1x Zugangskontrolle einrichten) If you want to use a different username/password then the sixth picture appears.)

I want to save the information in the sixth picture for the entire computer and every user on this computer.

BUT I would be interested in, what your users file of freeradius contains.

I think there is a difference between using an AP or a switch to authenticate with freeradius.

seggerman

Hi,

Ok, now I understand your problem. I've looked at the document you linked. I have one main difference:

in the authentication section it is posted that for the EAP type you need to select "Geschütztes EAP (PEAP)". I have "Smart Card or other Certificate" (this is the other setting).

If you look here -> http://en.wikipedia.org/wiki/Protected_Extensible_Authentication_Protocol

It is described that PEAP is similar to TTLS. It is basically a tunnel that is generated. TTLS or PEAP has an inner and an outer layer. One is the certificate the other is uid/pw. thats why you are being prompted for uid/pw.

for my config I only used EAP (so only the certificate authentication without a tunnel). therefore also the "smart card or other certificate" setting in the EAP type.

Since your computers are not connected to a domain you cannot pass the creditials (thats why you're being prompted).

Now the question is do you need PEAP, or is EAP sufficiant ?

Cheers

Alexander

Nachtfalke

Hi,

I think it would be enough with EAP. It will be better than only MAC address filtering I think.
I tried with "other certificate or smartcard" but I think I missed some checkboxes there.
Do you have a solution for me how to configure it the right way ?

seggerman

Nachtfalke,

here are my config screens … in the second screen the "intern-CA" is my CA that is used for the client and server certificate.

I cannot test it on my LAN, since my radius isn't configed for this, but it is identical to my WLAN config. After connecting to the LAN, and aquiring an IP address you should be prompted for the certificate needed for the authentication.

Additional on your Cisco switch can you explicitly config the authentication to EAP ? So that the switch explicitly uses this authentication method.

If this doesn't work, could you post the config of the cisco and also the "radiusd -X" log (this then has the config and also the challenge/response during the authentication.

Regards

Alexander

EAP1.png_thumb

EAP2.png_thumb

Nachtfalke

Hi,

thanks for you help and screens. I think I did something close to your pics but not every checkboy is the same.
I will try it on monday.

Thanks.

chunk0r

Hi,

erm I understand you correctly, you use your own radius install and not the package from the pfsense gui?

Thanks
Chunk0r

Nachtfalke

@chunk0r:

Hi,

erm I understand you correctly, you use your own radius install and not the package from the pfsense gui?

Thanks
Chunk0r

seggerman is using his own RADIUS, I am using the pfsense package.

chunk0r

Thanks,

I'm also confused of wifi access, so I want connect my AP with the Radius server, so that my clients has to be auth with wpa2 against radius.
So my wpa2 key is the secret share key of radius? Cauz if I activate wpa2+eap on my openwrt AP, I don't have any other key field.

Metu69salemi

Your ap is the authenticator for the radius ( so you add it like client at radius )
One place where you can have more info for that is (sorry guys) microsoft technet, there is quite well explained the roles of the devices