Proper Memory for a Pfsense Rig?
-
What is the proper amount of memory for a 62 pc setup (63 including pfsense)?
The pfsense computer has 3 NICs. 1 is for the switch while 2 is for 2 different ISP connections.
We're only using 500mb (480 something) ddr1 ram on a pentium 4 pc for our pfsense setup.
-
It depends if you're going to run some packages or not.
And this link might help also: http://www.pfsense.org/index.php?option=com_content&task=view&id=52&Itemid=49 -
The number of users is not nearly as important as the bandwidth you need to push.
What is your connection?
A Pentium 4 with 512MB is likely to be good for 200+Mbps though, depending on cpu speed.
If you are using VPNs that number will come down, a lot!Steve
-
My connection is a 4.5mbps. Yes. It is slow and we're not exactly getting the 4.5mbps because of bad service for our country.
The packages that are installed:
The VPN:
The rest of the tabs are empty.
There is a wireless access point connected to it and it's turned on and accessible via browser. Afaik, nobody uses it.
EDIT: Turned off the wireless access point and there were no changes.
