Rc3 install failing on supermicro 5015a-phf bsdlable failed code 1
-
i have tried both amd64 and i386 however whenever i try to install rc3 to the local disk from cd i get the error
"Exxecution of the command
/sbin/bsdlable -B -r -w ad4s1 auto
FAILED with a return code of 1."i have previously been running rc2 on this box but wanted to do a fresh install.
any ideas? i searched (here and google) but most info is very old or not related
-
You might try writing zeroes to the whole drive, or at lease the beginning and end of the disk.
-
I'm getting the exact same error trying a fresh install of 2.0 RC3. I have reformatted the drive but still get the error. The only difference is instead of ad4s1 mine says ad0s1. Any suggestions on this. I previously was running 1.2.3 with no problems what so ever.
-
I swapped out the drive with a different drive, a little larger, and now all is good. I'm not sure what caused the problem with the first drive however.
-
i did the zeroes and all other recommendations
it's a 250 gb hard drive and i was able to install 1.2.3 on it no issue but rc3 is a no go no idea why for now i have just switched the harddrive and am doing a manufactures diagnostic on the disk
