Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Watchguard Firebox X Peak platform

    Scheduled Pinned Locked Moved
    Hardware
    18
    155
    106.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mmiller
      last edited by

      fastcon68,

      How are you determining that auto-negotiation is failing?  Are you looking at the switch side of the connection or the firebox side?  I've not had any issues and seeing that all of my ports are 100 and Full Duplex.

      1 Reply Last reply Reply Quote 0
      • F
        fastcon68
        last edited by

        no luck figuring out why.  but I have everthing working.  I only have one issue and that is my vonage device will not connect.  I connected it to the a dell 8 port switch then used a cross connect cable. I connect it there and have had no issues.

        I am using a combination of GB and 100MB and 10-Half for vonage.
        RC

        1 Reply Last reply Reply Quote 0
        • F
          fastcon68
          last edited by

          I have gotten the n series driver for the Tenda 311U.  what is the best way to install this new driver?

          I just got my new used 40 gb hard drive for my x6000.  what it the procedure for doing the install.  I currently have it connected to a USB converter.

          Last but not least here is the mbmon data:
          Temp.= 35.0, 18.0, 41.5; Rot.= 21774, 22500, 21093
          Vcore = 1.50, 1.92; Volt. = 3.33, 5.08, 12.16, -12.04, -0.67

          Can somebody explain the values?  This would be perfect to made into widget for the home page.

          I have item left to do and that is the arm/disarm light.  The x6000 is a awesome piece of technology.  Stephen10 was talking about 2 different add on cards.  what are the and what do they do?
          RC

          1 Reply Last reply Reply Quote 0
          • W
            wallabybob
            last edited by

            @fastcon68:

            I have gotten the n series driver for the Tenda 311U.  what is the best way to install this new driver?

            There is a driver for the Tenda W311U in snapshot builds of pfSense 2.0.

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              @fastcon68:

              I just got my new used 40 gb hard drive for my x6000.  what it the procedure for doing the install.

              The easiest way to do this probably to put the drive in a laptop then boot the laptop from the pfSense install cd and install from there.

              @fastcon68:

              Last but not least here is the mbmon data:
              Temp.= 35.0, 18.0, 41.5; Rot.= 21774, 22500, 21093
              Vcore = 1.50, 1.92; Volt. = 3.33, 5.08, 12.16, -12.04, -0.67

              Can somebody explain the values?  This would be perfect to made into widget for the home page.

              I've never been completely sure about this, the middle temp value probably an unconnected sensor. I think the last value is CPU and the first value is probably the chipset.

              @fastcon68:

              Stephen10 was talking about 2 different add on cards.  what are the and what do they do?

              There are no add on cards for the X-Peak as far as I know. The only expansion possibility is the mini-PCI slot. There is an expansion card for the X-E series, the 'tacoma' module, which adds advanced encryption for VPNs. It doesn't work in pfSense.

              Steve

              1 Reply Last reply Reply Quote 0
              • F
                fastcon68
                last edited by

                I just order a disk caddy for my 2.5 - 40 GB hard drive.  I reading through the forum on installing to a HD.  The problem that I have is I only have is, That I do not have a laptop that I can put the hard drive in to install PFsense.

                The caddy came from England, it should be here this upcomming weekend.  I have is a USB to IDE converter.  I would like to get the hard drive prepared before it comes in.

                What options do I have.  Does anybody have a base image that is 40GB in size that I could install on my HD.

                Thanks
                RC

                1 Reply Last reply Reply Quote 0
                • M
                  mmiller
                  last edited by

                  I tried to upgrade my memory to 2 Gigabytes last night in my X8000.  I figured I would max it out and ran into a roadblock.  When I installed the new memory all it would do it make a beeping sounds.  Nothing would come up on the LCD screen.  What I ordered was DDR1 400 PC3200 ECC.  Can anyone provide me with a type of DD1 400 with or with out ECC.  I really would prefer ECC though. An I guess if anyone else has the same type of ram maybe they can test as well.  I didn't think to download the hardware guide to try and reset the BIOS via the jumper.  Do you think that might be my issue the BIOS expects 512 megs.  I also  didn't see the VGA connector on the X8000.  I had thought the 2x8 2mm pitch IDC 16 connector was on the X8000.

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Hmm disappointing.  :(

                    Doesn't the original P4 2.8GHz cpu run with a 533 FSB?
                    The bios behaves just as a standard desktop bios as far as ram settings are concerned. I'd be very surprised if it was locked at 512MB, though I haven't tried it. I don't think the standard ram is ECC.
                    I have seen some bioses that through out an error when you change the ram. It could be saying something you can't see.
                    The 2mm pitch VGA header is only in the X-e box as you have found. I don't beleive the X-Peak has any vga hardware at all.

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • M
                      mmiller
                      last edited by

                      That is very disappointing.  I'm going to continue on my quest to get more ram for the X8000.  Maybe I will have a talk with the mother board manufacturer.  I was able to get a 4 gig CF card to boot with out making any changes to the BIOS settings.  Well I can't really make any changes to the BIOS.  It would be nice to see the BIOS screen with out flashing the current BIOS.

                      1 Reply Last reply Reply Quote 0
                      • C
                        charlie0440
                        last edited by

                        @stephenw10:

                        I trying to buy a x8000 and have read the whole thread. Thanks for all the work steve.

                        What is the best way to integrate Wifi into the firebox? I can see you have an antenna, what are the options ie USB or minipci? Model number of working devices would be appreciated. I don't mind modding the case but I have never done any soldering so hopefully none is needed.

                        1 Reply Last reply Reply Quote 0
                        • M
                          mmiller
                          last edited by

                          I have a x8000 and your only option is the minipci slot.  There is only one USB slot and it's a v1.0 or 1.1 not v2.0 USB.  You could try usb but get less than the 12 megabits of bandwidth you would be expecting.

                          1 Reply Last reply Reply Quote 0
                          • C
                            charlie0440
                            last edited by

                            So will this one work: Atheros AR5213A AR5004G Super G 108 Mbps Mini PCI Card.

                            How do you attach an antenna to a minipci?

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              That should work ok although there are issues with the driver. I get the 'stuck beacon' report in the logs a lot if I'm on a busy channel.
                              You need to use a short adapter cable to connect to the minipci card known as a 'pigtail'. I recovered the antenna and cable from an old access point.

                              Steve

                              1 Reply Last reply Reply Quote 0
                              • C
                                charlie0440
                                last edited by

                                Thanks. Im gonna try this card: Atheros AR5008 (Model: AR5BMB-0072TA) plus it comes with the pigtail cables.

                                My x8000 should arrive in the next few days.

                                stephenw10: Noise is my concern I have a X700 sat here next to me and its LOUD. Do I need to replace the processor in the X8000 or can I leave the stock processor in and just change the heatsink fan. I read about your pin mod

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  The standard fans are loud!. The standard CPU, 2.8GHz P4, is a hot chip with a 70w TDP. Also it has no power saving features which means it runs hot even though you almost certainly won't be using most of it's processing capacity.
                                  There are loads of compatible processors available for almost nothing that use less Watts. It's worth trying something cooler if you are fitting slower fans. Although I ran the original CPU and it wasn't running too hot with slower fans but I wasn't stressing it.

                                  Steve

                                  1 Reply Last reply Reply Quote 0
                                  • S
                                    sevilla
                                    last edited by

                                    Im using X1250e and bought a 4GB CF and tried to install it pfsense 2.0. I cant get signal from console. Its appears the CF isnt recognized. I tried from 512 CF with the same version (512MB version) and all works well.

                                    Any idea?

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      The X1250e is not the X-peak platform, it's X-e a later model.
                                      It's the same hardware as the x550e, x750e etc.

                                      In order to boot from a CF card larger than 256MB you need to make some adjustments in the bios.
                                      See the x550e thread, here, for a huge ammount of information!

                                      Steve

                                      1 Reply Last reply Reply Quote 0
                                      • W
                                        WGFX5000
                                        last edited by

                                        Watchguard Firebox X5000 Motherboard Diagnostic LED: D3 and D4 Green, D5 Red
                                        LCD Flashing But Nothing On It.
                                        System Can't Boot.

                                        What's the problem of the hardware?Please Help

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Hmm, it's been a while since I took the cover off mine but I don't remember it having any diagnostic LEDs.
                                          Are you sure you don't have an X5500e?
                                          I'll look tomorrow.

                                          Steve

                                          Edit: Wait are they next to the CF card?

                                          1 Reply Last reply Reply Quote 0
                                          • W
                                            WGFX5000
                                            last edited by

                                            Model:X5000

                                            LED.jpg_thumb
                                            LED.jpg
                                            ![Motherboard Model.jpg_thumb](/public/imported_attachments/1/Motherboard Model.jpg_thumb)
                                            ![Motherboard Model.jpg](/public/imported_attachments/1/Motherboard Model.jpg)

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post