Lan do not via pfsense to link external network
-
Check outbound nat rules that you have also your opt network in there.
i assume that lan is working -
In outbound settings
Mode: + Automatic outbound NAT rule generation
(IPsec passthrough included)
Mappings:
Interface Source Source Port Destination Destination Port NAT Address NAT Port Static Port Description
OPT2 any * * * * * NOOPT2 ip address is 192.168.8.8
tracert 8.8.8.8
Tracing route to 8.8.8.8 over a maximum of 30 hops
1 <1ms <1ms <1ms 192.168.8.8
2 * * * Request timed out.
3 * * * Request timed out.
…... -
This my settings problem or bug? :)
Can you help me. Thank you. -
Can you take screenshot of your outbound nat?
-
Please
-
-
Can you take a photo of editing that outbound nat
i can't remember what should be in that nat section. i think that it should be other than asterisk -
Please remove that management information from your post
-
Wow, don't post your username and password to the world unless you want to get hacked. I did you the favor of removing your post and disabling your WAN rule so no one can get to it WAN-side anymore, but no telling if it was compromised in the meantime. First I would reinstall that box from scratch as I wouldn't trust any system you left wide open and provided the username and password to the world.
-
Thank you, The pfsense is testing. after I use other management user and password.
-