PfSense with 2 routers and 1 switch
-
When the final version of 2.0 will be released?
When it's ready! ;)
Which should be very soon.
See: http://forum.pfsense.org/index.php/topic,29857.0.html
Steve
-
When the final version of 2.0 will be released?
When it's ready! ;)
Which should be very soon.
See: http://forum.pfsense.org/index.php/topic,29857.0.html
Steve
Hai
I have an exactly SIMILAR setup in our office already running 1.2.3 and we did a fresh install of 2.0 RC3. I am unable to get load balance up and working.
Here is how our setup is ISP1 on rl0 marked as WAN (DHCP) gives out a public Ip (dynamic ..changes on reboot) and ISP 2 on
rl1 (DHCP) but gives a private ip on 192.168.x.y
Is there a work around to do load balancing here?
Right now we are using only one ISP of the above. I read somewhere that load balancing will work ONLY with static and public Ip. Is that true?
Regards
Kumar -
I read somewhere that load balancing will work ONLY with static and public Ip. Is that true?
No.
Not for outgoing load balancing anyway.
I am using two PPPoE connections here with dynamic IPs.
Currently they are both public IPs but I have had it setup with a separate router and hence a private IP before.
Both setups worked fine with load balancing.Steve
-
I read somewhere that load balancing will work ONLY with static and public Ip. Is that true?
No.
Not for outgoing load balancing anyway.
I am using two PPPoE connections here with dynamic IPs.
Currently they are both public IPs but I have had it setup with a separate router and hence a private IP before.
Both setups worked fine with load balancing.Steve
So essentially my ISP1 has to be routed to a private Ip space and then fed to PFsense..Am I right?
Due to frequent connectivity disruption I am trying to set this up
Sorry I am a newbie -
The best setup is to have both connections pass their public IP to pfSense.
That way pfSense can control and monitor the connection.
That depends on what sort of connections you are using (cable, adsl etc) and whether you can set whatever modems you have into 'bridge' mode.Steve
-
The best setup is to have both connections pass their public IP to pfSense.
That way pfSense can control and monitor the connection.
That depends on what sort of connections you are using (cable, adsl etc) and whether you can set whatever modems you have into 'bridge' mode.Steve
One ISP is already giving public Ip though it changes everytime it is rebooted. I am not sure if ti can be made to bridge mode. I need to check…..
All I know is that it is a wimax based connection. What I get from their antenna on the rooftop is an RJ45 jack which I plug to my
current 1.2.3 pfsense box and thru the second NIC I hook it to the switch in the office.I have already filed a request with the incoming ISP to give me public IP instaed of the 192..x.x.x their adsl router provides. I will know tomorrow.
Will keep this link updated. Thank you for the time and patienceRegards
Kumar
-
One ISP is already giving public Ip though it changes every time it is rebooted. I am not sure if ti can be made to bridge mode. I need to check…..
No need to adjust anything with that connection. Public IP via dhcp on an RJ-45 is ideal.
I have already filed a request with the incoming ISP to give me public IP instead of the 192..x.x.x their adsl router provides.
Does your ISP have their adsl router locked down? Usually it is this that can be set to bridge mode to pass a public IP through to your pfSense box.
Either way you should be able loadbalance the two connections.
Steve
-
One ISP is already giving public Ip though it changes every time it is rebooted. I am not sure if ti can be made to bridge mode. I need to check…..
No need to adjust anything with that connection. Public IP via dhcp on an RJ-45 is ideal.
I have already filed a request with the incoming ISP to give me public IP instead of the 192..x.x.x their adsl router provides.
Does your ISP have their adsl router locked down? Usually it is this that can be set to bridge mode to pass a public IP through to your pfSense box.
Either way you should be able loadbalance the two connections.
Steve
They havent locked it. It is set at 192.168.1.1, but connectivity got cut when I changed the mode. So i have filed a request.
Right now I am unable to load balance when I tried following the doc given at the site. Is there a good step by step document
for this scenario? -
It's all covered here:
http://doc.pfsense.org/index.php/Multi-WAN_2.0Steve
-
Typically when you change your ADSL modem from router to bridge mode you need to also change the corresponding pfSense interface from DHCP and enable pppoe on it: Interfaces -> (assign), click on PPP tab, add a PPP interface, go back to Interfaces -> (assign), add the ppp interface, assign it to WAN (or whatever) then add the username and password that had previously been configured in the ADSL modem for ppp.
I don't know if that applies to your service.
