Multiple Issues with updates
-
As I have side in 2 other posts, I am a newbie and have started this install from the LIVE CD installer.
Slowly I am learning what is where and there seems to be a few issues with packages….
All errors are listed in Red that I can see
They include area's of:
Apinger
ntpd
squidcache
ntopVersion: 2.0-RC3(i386)
built on Aug 4 12:47:50 EDT 2010
Just took that latest update for todayWAN Info (pppoe0)
Status up
PPPoE up
Uptime 00:46:38
MAC address 00:00:00:00:00:00
IP address 99.144.241.1
Subnet mask 255.255.255.255
Gateway 99.144.255.254
ISP DNS servers 68.94.156.1
68.94.157.1
In/out packets 54020/53988 (70.54 MB/2.58 MB)
In/out packets (pass) 53988/38041 (70.54 MB/2.58 MB)
In/out packets (block) 32/0 (1 KB/0 bytes)
In/out errors 0/0
Collisions 0Current System Log - This should be from a single startup
Right about 10 minutes to completeAug 4 17:35:57 syslogd: kernel boot file is /boot/kernel/kernel
Aug 4 17:35:56 syslogd: exiting on signal 15
Aug 4 17:35:56 check_reload_status: Syncing firewall
Aug 4 17:35:14 syslogd: kernel boot file is /boot/kernel/kernel
Aug 4 17:35:14 syslogd: exiting on signal 15
Aug 4 17:35:14 check_reload_status: Syncing firewall
Aug 4 17:33:47 syslogd: kernel boot file is /boot/kernel/kernel
Aug 4 17:33:46 syslogd: exiting on signal 15
Aug 4 17:33:46 check_reload_status: Syncing firewall
Aug 4 17:31:08 Squid_Alarm[4311]: Squid has resumed. Reconfiguring filter.
Aug 4 17:31:08 Squid_Alarm[4262]: Reconfiguring filter…
Aug 4 17:31:05 squid[4233]: Squid Parent: child process 4236 started
Aug 4 17:31:05 Squid_Alarm[4219]: Attempting restart…
Aug 4 17:31:05 Squid_Alarm[4216]: Squid has exited. Reconfiguring filter.
Aug 4 17:31:02 check_reload_status: Reloading filter
Aug 4 17:31:02 ntop[3998]: THREADMGMT[t718770496]: RRD: Throughput data collection: Thread running [p3998]
Aug 4 17:31:02 ntop[3998]: THREADMGMT[t718770496]: RRD: Throughput data collection: Thread starting [p3998]
Aug 4 17:31:02 ntop[3998]: THREADMGMT[t712005760]: RRD: Data collection thread running [p3998]
Aug 4 17:31:02 ntop[3998]: THREADMGMT[t718770496]: RRD: Started thread for throughput data collection
Aug 4 17:31:01 squid[3915]: Squid Parent: child process 3917 exited with status 0
Aug 4 17:31:01 sshlockout[4164]: sshlockout/webConfigurator v3.0 starting up
Aug 4 17:31:01 login: login on ttyv0 as root
Aug 4 17:31:00 php: : IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing.
Aug 4 17:30:58 ntop[3998]: CHKVER: This version of ntop is a minimally supported but OLDER version - please upgradeAug 4 17:30:58 ntop[3998]: CHKVER: as of date is '2010-10-06T01:12:25'Aug 4 17:30:58 ntop[3998]: CHKVER: Version file is from 'version.ntop.org'
Aug 4 17:30:57 php: : Not calling package sync code for dependency squidcache of squid because some include files are missing.
Aug 4 17:30:57 php: : Not calling package sync code for dependency squidusers of squid because some include files are missing.
Aug 4 17:30:57 php: : Not calling package sync code for dependency squidauth of squid because some include files are missing.
Aug 4 17:30:57 php: : Not calling package sync code for dependency squidupstream of squid because some include files are missing.
Aug 4 17:30:57 php: : Not calling package sync code for dependency squidtraffic of squid because some include files are missing.
Aug 4 17:30:57 php: : Not calling package sync code for dependency squid of squid because some include files are missing.
Aug 4 17:30:57 php: : Not calling package sync code for dependency squidnac of squid because some include files are missing.
Aug 4 17:30:57 php: : Not calling package sync code for dependency squidcache of squid because some include files are missing.Aug 4 17:30:57 check_reload_status: Reloading filter
Aug 4 17:30:57 php: : Reloading Squid for configuration sync
Aug 4 17:30:57 ntop[3998]: CHKVER: Checking current ntop version at version.ntop.org/version.xml
Aug 4 17:30:55 check_reload_status: Reloading filter
Aug 4 17:30:54 php: : Reloading Squid for configuration sync
Aug 4 17:30:54 check_reload_status: Syncing firewall
Aug 4 17:30:54 check_reload_status: Syncing firewall
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712007360]: SIH: Idle host scan thread running [p3998]
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712008000]: SFP: Fingerprint scan thread running [p3998]
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t679481664]: ntop RUNSTATE: RUN(4)
Aug 4 17:30:52 ntop[3998]: Now running as requested user 'root' (0:0)
Aug 4 17:30:52 ntop[3998]: INIT: Created pid file (/var/run/ntop.pid)
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712005760]: RRD: Data collection thread starting [p3998]
Aug 4 17:30:52 ntop[3998]: THREADMGMT: RRD: Started thread (t712005760) for data collection
Aug 4 17:30:52 ntop[3998]: RRD: Mask for new files is 0066
Aug 4 17:30:52 ntop[3998]: RRD: Mask for new directories is 0700
Aug 4 17:30:52 ntop[3998]: RRD: Welcome to the RRD plugin
Aug 4 17:30:52 ntop[3998]: Calling plugin start functions (if any)
Aug 4 17:30:52 ntop[3998]: SFLOW: Welcome to sFlow.(C) 2002-10 by Luca Deri
Aug 4 17:30:52 ntop[3998]: RRD: Welcome to Round-Robin Database. (C) 2002-10 by Luca Deri.
Aug 4 17:30:52 ntop[3998]: NETFLOW: Welcome to NetFlow.(C) 2002-10 by Luca Deri
Aug 4 17:30:52 ntop[3998]: ICMP: Welcome to ICMPWatch. (C) 1999-2005 by Luca Deri
Aug 4 17:30:52 ntop[3998]: CPACKET: Welcome to cPacket.(C) 2008 by Luca Deri
Aug 4 17:30:52 ntop[3998]: Searching for plugins in /usr/local/lib/ntop/plugins
Aug 4 17:30:52 ntop[3998]: Loading Plugins
Aug 4 17:30:52 ntop[3998]: WEB: ntop's web server is now processing requests
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712006080]: WEB: Server connection thread running [p3998]
Aug 4 17:30:52 ntop[3998]: Note: SIGPIPE handler set (ignore)
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712006080]: WEB: Server connection thread starting [p3998]
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712006080]: INITWEB: Started thread for web server
Aug 4 17:30:52 ntop[3998]: INITWEB: Starting web server
Aug 4 17:30:52 ntop[3998]: INITWEB: Waiting for HTTP connections on port 3000
Aug 4 17:30:52 ntop[3998]: INITWEB: Initialized socket, port 3000, address (any)
Aug 4 17:30:52 ntop[3998]: INITWEB: Initializing TCP/IP socket connections for web server
Aug 4 17:30:52 ntop[3998]: INITWEB: Initializing web server
Aug 4 17:30:52 ntop[3998]: SSL is present but https is disabled: use -W <https port="">for enabling it
Aug 4 17:30:52 ntop[3998]: GeoIP: loaded ASN config file /usr/local/etc/ntop/GeoIPASNum.dat
Aug 4 17:30:52 ntop[3998]: GeoIP: loaded config file /usr/local/etc/ntop/GeoLiteCity.dat
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712007040]: DNSAR(1): Address resolution thread running
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712006720]: DNSAR(2): Address resolution thread running
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712006400]: DNSAR(3): Address resolution thread running
Aug 4 17:30:52 ntop[3998]: Calling plugin start functions (if any)
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712006400]: DNSAR(3): Started thread for DNS address resolution
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712006720]: DNSAR(2): Started thread for DNS address resolution
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712007040]: DNSAR(1): Started thread for DNS address resolution
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712007360]: SIH: Idle host scan thread starting [p3998]
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712007360]: SIH: Started thread for idle hosts detection
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712008000]: SFP: Started thread for fingerprinting
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t712008000]: SFP: Fingerprint scan thread starting [p3998]
Aug 4 17:30:52 ntop[3998]: Initializing external applications
Aug 4 17:30:52 ntop[3998]: Database support not compiled into ntop
Aug 4 17:30:52 ntop[3998]: THREADMGMT[t679481664]: Now running as a daemon
Aug 4 17:30:52 ntop[3997]: THREADMGMT[t679481664]: ntop RUNSTATE: INIT(2)
Aug 4 17:30:52 ntop[3997]: THREADMGMT[t679481664]: ntop RUNSTATE: PREINIT(1)
Aug 4 17:30:50 ntop[3990]: THREADMGMT[t679481664]: ntop RUNSTATE: INIT(2)
Aug 4 17:30:50 ntop[3990]: THREADMGMT[t679481664]: ntop RUNSTATE: PREINIT(1)
Aug 4 17:30:46 ntop[3984]: THREADMGMT[t679481664]: ntop RUNSTATE: INIT(2)
Aug 4 17:30:46 ntop[3984]: THREADMGMT[t679481664]: ntop RUNSTATE: PREINIT(1)
Aug 4 17:30:36 ntop[2909]: ntop is now quitting…
Aug 4 17:30:36 ntop[2909]: CLEANUP[t719495488]: ntop caught signal 14 [state=7]
Aug 4 17:30:32 ntop[2909]: THREADMGMT[t712005760]: RRD: Data collection thread terminated [p2909]
Aug 4 17:30:32 ntop[2909]: THREADMGMT[t712005760]: RRD: Data collection thread stopping [p2909] State>RUN
Aug 4 17:30:28 ntop[2909]: THREADMGMT[t679481664]: Main thread shutting down
Aug 4 17:30:27 ntop[2909]: THREADMGMT[t693289280]: SFP: Fingerprint scan thread terminated [p2909]
Aug 4 17:30:27 ntop[2909]: THREADMGMT[t712007360]: SIH: Idle host scan thread terminated [p2909]
Aug 4 17:30:27 ntop[2909]: THREADMGMT[t712006080]: WEB: Server connection thread terminated [p2909]
Aug 4 17:30:26 ntop[2909]: THREADMGMT[t712006720]: DNSAR(2): Address resolution thread terminated [p2909]
Aug 4 17:30:26 ntop[2909]: Joining thread DNSAR1
Aug 4 17:30:26 ntop[2909]: CLEANUP[t719495488] catching thread is unknown
Aug 4 17:30:26 ntop[2909]: THREADMGMT[t719495488]: ntop RUNSTATE: SHUTDOWN(7)
Aug 4 17:30:26 ntop[2909]: CLEANUP[t719495488]: ntop caught signal 15 [state=4]Aug 4 17:30:26 php: : Restarting/Starting all packages.
Aug 4 17:30:25 check_reload_status: Syncing firewall
Aug 4 17:30:25 php: : Reloading Squid for configuration sync
Aug 4 17:30:25 php: : The command '/usr/local/sbin/squid -k reconfigure' returned exit code '1', the output was 'squid: ERROR: No running copy'Aug 4 17:30:25 php: : Reloading Squid for configuration sync
Aug 4 17:30:24 squid[3915]: Squid Parent: child process 3917 started
Aug 4 17:30:24 php: : Starting a proxy monitor script
Aug 4 17:30:24 php: : Starting Squid
Aug 4 17:30:23 php: : Stopping any running proxy monitors
Aug 4 17:30:23 check_reload_status: Syncing firewall
Aug 4 17:30:01 php: : Beginning package installation for squid.
Aug 4 17:30:00 check_reload_status: Syncing firewall
Aug 4 17:29:59 check_reload_status: Syncing firewall
Aug 4 17:29:59 squid[1483]: Squid Parent: child process 1485 exited with status 0
Aug 4 17:29:52 php: : Reloading Squid for configuration sync
Aug 4 17:29:51 php: : Reloading Squid for configuration sync
Aug 4 17:29:51 check_reload_status: Syncing firewall
Aug 4 17:29:51 check_reload_status: Syncing firewall
Aug 4 17:29:47 ntop[2909]: THREADMGMT[t719495488]: RRD: Throughput data collection: Thread running [p2909]
Aug 4 17:29:47 ntop[2909]: THREADMGMT[t719495488]: RRD: Throughput data collection: Thread starting [p2909]
Aug 4 17:29:47 ntop[2909]: THREADMGMT[t712005760]: RRD: Data collection thread running [p2909]
Aug 4 17:29:47 ntop[2909]: THREADMGMT[t719495488]: RRD: Started thread for throughput data collection
Aug 4 17:29:46 php: : Beginning package installation for Lightsquid.
Aug 4 17:29:44 check_reload_status: Syncing firewall
Aug 4 17:29:44 check_reload_status: Syncing firewall
Aug 4 17:29:43 ntop[2909]: CHKVER: This version of ntop is a minimally supported but OLDER version - please upgrade
Aug 4 17:29:43 ntop[2909]: CHKVER: as of date is '2010-10-06T01:12:25'
Aug 4 17:29:43 ntop[2909]: CHKVER: Version file is from 'version.ntop.org'
Aug 4 17:29:42 ntop[2909]: CHKVER: Checking current ntop version at version.ntop.org/version.xmlAug 4 17:29:39 php: : Beginning package installation for darkstat.
Aug 4 17:29:38 check_reload_status: Syncing firewall
Aug 4 17:29:38 check_reload_status: Syncing firewall
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712007360]: SIH: Idle host scan thread running [p2909]
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t693289280]: SFP: Fingerprint scan thread running [p2909]
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t679481664]: ntop RUNSTATE: RUN(4)
Aug 4 17:29:37 ntop[2909]: Now running as requested user 'root' (0:0)
Aug 4 17:29:37 ntop[2909]: INIT: Created pid file (/var/run/ntop.pid)
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712005760]: RRD: Data collection thread starting [p2909]
Aug 4 17:29:37 ntop[2909]: THREADMGMT: RRD: Started thread (t712005760) for data collection
Aug 4 17:29:37 ntop[2909]: RRD: Mask for new files is 0066
Aug 4 17:29:37 ntop[2909]: RRD: Mask for new directories is 0700
Aug 4 17:29:37 ntop[2909]: RRD: Welcome to the RRD plugin
Aug 4 17:29:37 ntop[2909]: Calling plugin start functions (if any)
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712006400]: DNSAR(3): Address resolution thread running
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712007040]: DNSAR(1): Address resolution thread running
Aug 4 17:29:37 ntop[2909]: SFLOW: Welcome to sFlow.(C) 2002-10 by Luca Deri
Aug 4 17:29:37 ntop[2909]: RRD: Welcome to Round-Robin Database. (C) 2002-10 by Luca Deri.
Aug 4 17:29:37 ntop[2909]: NETFLOW: Welcome to NetFlow.(C) 2002-10 by Luca Deri
Aug 4 17:29:37 ntop[2909]: ICMP: Welcome to ICMPWatch. (C) 1999-2005 by Luca Deri
Aug 4 17:29:37 ntop[2909]: CPACKET: Welcome to cPacket.(C) 2008 by Luca Deri
Aug 4 17:29:37 ntop[2909]: WEB: ntop's web server is now processing requests
Aug 4 17:29:37 ntop[2909]: Searching for plugins in /usr/local/lib/ntop/plugins
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712006080]: WEB: Server connection thread running [p2909]
Aug 4 17:29:37 ntop[2909]: Loading Plugins
Aug 4 17:29:37 ntop[2909]: Note: SIGPIPE handler set (ignore)
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712006080]: WEB: Server connection thread starting [p2909]
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712006080]: INITWEB: Started thread for web server
Aug 4 17:29:37 ntop[2909]: INITWEB: Starting web server
Aug 4 17:29:37 ntop[2909]: INITWEB: Waiting for HTTP connections on port 3000
Aug 4 17:29:37 ntop[2909]: INITWEB: Initialized socket, port 3000, address (any)
Aug 4 17:29:37 ntop[2909]: INITWEB: Initializing TCP/IP socket connections for web server
Aug 4 17:29:37 ntop[2909]: INITWEB: Initializing web server
Aug 4 17:29:37 ntop[2909]: SSL is present but https is disabled: use -W <https port="">for enabling it
Aug 4 17:29:37 ntop[2909]: GeoIP: loaded ASN config file /usr/local/etc/ntop/GeoIPASNum.dat
Aug 4 17:29:37 ntop[2909]: GeoIP: loaded config file /usr/local/etc/ntop/GeoLiteCity.dat
Aug 4 17:29:37 ntop[2909]: Calling plugin start functions (if any)
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712006400]: DNSAR(3): Started thread for DNS address resolution
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712006720]: DNSAR(2): Address resolution thread running
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712006720]: DNSAR(2): Started thread for DNS address resolution
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t693289280]: SFP: Fingerprint scan thread starting [p2909]
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712007040]: DNSAR(1): Started thread for DNS address resolution
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712007360]: SIH: Idle host scan thread starting [p2909]
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t712007360]: SIH: Started thread for idle hosts detection
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t693289280]: SFP: Started thread for fingerprinting
Aug 4 17:29:37 ntop[2909]: Initializing external applications
Aug 4 17:29:37 ntop[2909]: Database support not compiled into ntop
Aug 4 17:29:37 ntop[2909]: THREADMGMT[t679481664]: Now running as a daemon
Aug 4 17:29:35 check_reload_status: Syncing firewall
Aug 4 17:29:35 ntop[2896]: THREADMGMT[t679481664]: ntop RUNSTATE: INIT(2)
Aug 4 17:29:35 ntop[2896]: THREADMGMT[t679481664]: ntop RUNSTATE: PREINIT(1)
Aug 4 17:29:30 ntop[2773]: THREADMGMT[t679481664]: ntop RUNSTATE: INIT(2)
Aug 4 17:29:30 ntop[2773]: THREADMGMT[t679481664]: ntop RUNSTATE: PREINIT(1)
Aug 4 17:27:50 apinger: /usr/local/bin/rrdtool respawning too fast, waiting 300s.
Aug 4 17:26:50 apinger: Error while feeding rrdtool: Broken pipeAug 4 17:26:31 Squid_Alarm[1550]: Squid has resumed. Reconfiguring filter.
Aug 4 17:26:31 Squid_Alarm[1496]: Reconfiguring filter…
Aug 4 17:26:28 squid[1483]: Squid Parent: child process 1485 started
Aug 4 17:26:28 Squid_Alarm[1476]: Attempting restart…
Aug 4 17:26:28 Squid_Alarm[1474]: Squid has exited. Reconfiguring filter.
Aug 4 17:26:26 php: : Beginning package installation for ntop.
Aug 4 17:26:25 squid[1067]: Squid Parent: child process 1070 exited with status 0
Aug 4 17:26:24 check_reload_status: Syncing firewall
Aug 4 17:26:24 check_reload_status: Syncing firewall
Aug 4 17:26:21 php: : Not calling package sync code for dependency squidcache of squid because some include files are missing.
Aug 4 17:26:21 php: : Not calling package sync code for dependency squidusers of squid because some include files are missing.
Aug 4 17:26:21 php: : Not calling package sync code for dependency squidauth of squid because some include files are missing.
Aug 4 17:26:21 php: : Not calling package sync code for dependency squidupstream of squid because some include files are missing.
Aug 4 17:26:20 php: : Not calling package sync code for dependency squidtraffic of squid because some include files are missing.
Aug 4 17:26:20 php: : Not calling package sync code for dependency squid of squid because some include files are missing.
Aug 4 17:26:20 php: : Not calling package sync code for dependency squidnac of squid because some include files are missing.
Aug 4 17:26:20 php: : Not calling package sync code for dependency squidcache of squid because some include files are missing.Aug 4 17:26:20 check_reload_status: Reloading filter
Aug 4 17:26:20 php: : Reloading Squid for configuration sync
Aug 4 17:26:18 check_reload_status: Reloading filter
Aug 4 17:26:18 squid[1067]: Squid Parent: child process 1070 started
Aug 4 17:26:18 php: : Starting Squid
Aug 4 17:26:18 php: : Creating squid log dir /var/squid/log/
Aug 4 17:26:17 check_reload_status: Syncing firewall
Aug 4 17:26:17 check_reload_status: Syncing firewall
Aug 4 17:26:08 php: : Restarting/Starting all packages.
Aug 4 17:26:06 check_reload_status: Starting packages
Aug 4 17:26:06 php: : pfSense package system has detected an ip change 99.144.193.2 -> … Restarting packages.
Aug 4 17:26:06 php: : OpenNTPD is starting up.
Aug 4 17:26:06 php: : The command '/usr/bin/killall 'ntpd'' returned exit code '1', the output was 'killall: warning: kill -TERM 435: No such process'Aug 4 17:26:06 php: : Creating rrd update script
Aug 4 17:26:05 php: : Resyncing OpenVPN instances for interface WAN.
Aug 4 17:26:00 php: : phpDynDNS: No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Aug 4 17:26:00 php: : DynDns: Current WAN IP: 99.144.241.1 Cached IP: 99.144.241.1
Aug 4 17:26:00 php: : DynDns debug information: 99.144.241.1 extracted from checkip.dyndns.org
Aug 4 17:25:59 php: : phpDynDNS: (Success) IP Address Updated Successfully!
Aug 4 17:25:59 php: : phpDynDNS: updating cache file /conf/dyndns_wanzoneedit' XXXXX-Edited’.cache: 99.144.241.1
Aug 4 17:25:59 php: : DynDns debug information: 99.144.241.1 extracted from checkip.dyndns.org
Aug 4 17:25:59 php: : DynDns: Current Service: zoneedit
Aug 4 17:25:59 php: : DynDns: DynDns _checkStatus() starting.
Aug 4 17:25:56 php: : DynDns: DynDns _update() starting.
Aug 4 17:25:56 php: : DynDns debug information: DynDns: cacheIP != wan_ip. Updating. Cached IP: 99.144.193.2 WAN IP: 99.144.241.1
Aug 4 17:25:56 php: : DynDns: Current WAN IP: 99.144.241.1 Cached IP: 99.144.193.2
Aug 4 17:25:56 php: : DynDns debug information: 99.144.241.1 extracted from checkip.dyndns.org
Aug 4 17:25:56 php: : DynDns: updatedns() starting
Aug 4 17:25:56 php: : DynDns: updatedns() starting
Aug 4 17:25:56 php: : Creating rrd update script
Aug 4 17:25:55 php: : phpDynDNS: No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Aug 4 17:25:55 php: : DynDns: Current WAN IP: 99.144.241.1 Cached IP: 99.144.241.1
Aug 4 17:25:55 php: : DynDns debug information: 99.144.241.1 extracted from checkip.dyndns.org
Aug 4 17:25:55 php: : phpDynDNS: (Success) IP Address Updated Successfully!
Aug 4 17:25:55 php: : phpDynDNS: updating cache file /conf/dyndns_wanzoneedit'XXXXX-Edited.cache: 99.144.241.1
Aug 4 17:25:55 php: : DynDns debug information: 99.144.241.1 extracted from checkip.dyndns.org
Aug 4 17:25:55 php: : DynDns: Current Service: zoneedit
Aug 4 17:25:55 php: : DynDns: DynDns _checkStatus() starting.
Aug 4 17:25:54 check_reload_status: Restarting ipsec tunnels
Aug 4 17:25:54 php: : DynDns: updatedns() starting
Aug 4 17:25:51 dnsmasq[494]: read /etc/hosts - 2 addresses
Aug 4 17:25:51 check_reload_status: Updating all dyndns
Aug 4 17:25:51 dnsmasq[494]: using nameserver 68.94.156.1#53
Aug 4 17:25:51 dnsmasq[494]: using nameserver 68.94.157.1#53
Aug 4 17:25:51 dnsmasq[494]: reading /etc/resolv.conf
Aug 4 17:25:51 dnsmasq[494]: compile time options: IPv6 GNU-getopt no-DBus I18N DHCP TFTP
Aug 4 17:25:51 dnsmasq[494]: started, version 2.55 cachesize 10000
Aug 4 17:25:51 php: : OpenNTPD is starting up.
Aug 4 17:25:50 php: : DynDns: DynDns _update() starting.
Aug 4 17:25:50 php: : DynDns debug information: DynDns: cacheIP != wan_ip. Updating. Cached IP: 99.144.193.2 WAN IP: 99.144.241.1
Aug 4 17:25:50 php: : DynDns: Current WAN IP: 99.144.241.1 Cached IP: 99.144.193.2
Aug 4 17:25:50 php: : DynDns debug information: 99.144.241.1 extracted from checkip.dyndns.org
Aug 4 17:25:50 apinger: Starting Alarm Pinger, apinger(482)
Aug 4 17:25:50 php: : DynDns: updatedns() starting
Aug 4 17:25:50 check_reload_status: Reloading filter
Aug 4 17:25:49 php: : ROUTING: setting default route to 99.144.255.254
Aug 4 17:25:45 check_reload_status: Rewriting resolv.conf
Aug 4 17:25:44 kernel: bfe0: link state changed to UP
Aug 4 17:25:44 check_reload_status: Linkup starting bfe0
Aug 4 17:25:44 apinger: No usable targets found, exiting
Aug 4 17:25:44 apinger: Starting Alarm Pinger, apinger(400)
Aug 4 17:25:43 php: : Could not find gateway for interface(wan).
Aug 4 17:25:43 php: : Could not find gateway for interface(wan).Aug 4 17:25:42 kernel: pflog0: promiscuous mode enabled
Aug 4 17:25:42 kernel: Trying to mount root from ufs:/dev/ad0s1a
Aug 4 17:25:42 kernel: uhub3: 6 ports with 6 removable, self powered
Aug 4 17:25:42 kernel: Root mount waiting for: usbus3
Aug 4 17:25:42 kernel: uhub2: 2 ports with 2 removable, self powered
Aug 4 17:25:42 kernel: uhub1: 2 ports with 2 removable, self powered
Aug 4 17:25:42 kernel: uhub0: 2 ports with 2 removable, self powered
Aug 4 17:25:42 kernel: SMP: AP CPU #1 Launched!
Aug 4 17:25:42 kernel: acd0: DVDR <plextor dvdr="" px-716a="" 1.5a="">at ata1-master UDMA66
Aug 4 17:25:42 kernel: uhub3: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus3
Aug 4 17:25:42 kernel: ugen3.1: <intel>at usbus3
Aug 4 17:25:42 kernel: uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
Aug 4 17:25:42 kernel: ugen2.1: <intel>at usbus2
Aug 4 17:25:42 kernel: uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
Aug 4 17:25:42 kernel: ugen1.1: <intel>at usbus1
Aug 4 17:25:42 kernel: uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
Aug 4 17:25:42 kernel: ugen0.1: <intel>at usbus0
Aug 4 17:25:42 kernel: ad0: 76319MB <wdc wd800aajb-00j3a0="" 01.03e01="">at ata0-master UDMA100
Aug 4 17:25:42 kernel: usbus3: 480Mbps High Speed USB v2.0
Aug 4 17:25:42 kernel: usbus2: 12Mbps Full Speed USB v1.0
Aug 4 17:25:42 kernel: usbus1: 12Mbps Full Speed USB v1.0
Aug 4 17:25:42 kernel: usbus0: 12Mbps Full Speed USB v1.0
Aug 4 17:25:42 kernel: IPsec: Initialized Security Association Processing.
Aug 4 17:25:42 kernel: Timecounters tick every 1.000 msec
Aug 4 17:25:42 kernel: p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
Aug 4 17:25:42 kernel: p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
Aug 4 17:25:42 kernel: vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Aug 4 17:25:42 kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Aug 4 17:25:42 kernel: sc0: <system console="">at flags 0x100 on isa0
Aug 4 17:25:42 kernel: orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xcc000-0xccfff pnpid ORM0000 on isa0
Aug 4 17:25:42 kernel: pmtimer0 on isa0
Aug 4 17:25:42 kernel: psm0: model IntelliMouse, device ID 3
Aug 4 17:25:42 kernel: psm0: [ITHREAD]
Aug 4 17:25:42 kernel: psm0: [GIANT-LOCKED]
Aug 4 17:25:42 kernel: psm0: <ps 2="" mouse="">irq 12 on atkbdc0
Aug 4 17:25:42 kernel: atkbd0: [ITHREAD]
Aug 4 17:25:42 kernel: atkbd0: [GIANT-LOCKED]
Aug 4 17:25:42 kernel: kbd0 at atkbd0
Aug 4 17:25:42 kernel: atkbd0: <at keyboard="">irq 1 on atkbdc0
Aug 4 17:25:42 kernel: atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
Aug 4 17:25:42 kernel: uart1: [FILTER]
Aug 4 17:25:42 kernel: uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
Aug 4 17:25:42 kernel: uart0: [FILTER]
Aug 4 17:25:42 kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Aug 4 17:25:42 kernel: ppi0: <parallel i="" o="">on ppbus0
Aug 4 17:25:42 kernel: lpt0: Interrupt-driven port
Aug 4 17:25:42 kernel: lpt0: [ITHREAD]
Aug 4 17:25:42 kernel: lpt0: <printer>on ppbus0
Aug 4 17:25:42 kernel: plip0: [ITHREAD]
Aug 4 17:25:42 kernel: plip0: <plip network="" interface="">on ppbus0
Aug 4 17:25:42 kernel: ppbus0: <parallel port="" bus="">on ppc0
Aug 4 17:25:42 kernel: ppc0: [ITHREAD]
Aug 4 17:25:42 kernel: ppc0: FIFO with 16/16/16 bytes threshold
Aug 4 17:25:42 kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Aug 4 17:25:42 kernel: ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
Aug 4 17:25:42 kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Aug 4 17:25:42 kernel: fdc0: [FILTER]
Aug 4 17:25:42 kernel: fdc0: <floppy drive="" controller="">port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
Aug 4 17:25:42 kernel: atrtc0: <at realtime="" clock="">port 0x70-0x73 irq 8 on acpi0
Aug 4 17:25:42 kernel: pci0: <multimedia, audio="">at device 31.5 (no driver attached)
Aug 4 17:25:42 kernel: ata1: [ITHREAD]
Aug 4 17:25:42 kernel: ata1: <ata 1="" channel="">on atapci0
Aug 4 17:25:42 kernel: ata0: [ITHREAD]
Aug 4 17:25:42 kernel: ata0: <ata 0="" channel="">on atapci0
Aug 4 17:25:42 kernel: atapci0: <intel ich4="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 18 at device 31.1 on pci0
Aug 4 17:25:42 kernel: isa0: <isa bus="">on isab0
Aug 4 17:25:42 kernel: isab0: <pci-isa bridge="">at device 31.0 on pci0
Aug 4 17:25:42 kernel: fxp0: [ITHREAD]
Aug 4 17:25:42 kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Aug 4 17:25:42 kernel: inphy0: <i82555 10="" 100="" media="" interface="">PHY 1 on miibus1
Aug 4 17:25:42 kernel: miibus1: <mii bus="">on fxp0
Aug 4 17:25:42 kernel: fxp0: <intel 100="" 82559="" pro="" ethernet="">port 0xb400-0xb43f mem 0xf4000000-0xf4000fff,0xf3800000-0xf38fffff irq 23 at device 11.0 on pci2
Aug 4 17:25:42 kernel: vgapci0: <vga-compatible display="">port 0xb800-0xb8ff mem 0xf5000000-0xf5ffffff,0xf4800000-0xf4800fff irq 22 at device 10.0 on pci2
Aug 4 17:25:42 kernel: bfe0: [ITHREAD]
Aug 4 17:25:42 kernel: bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Aug 4 17:25:42 kernel: bmtphy0: <bcm4401 10="" 100basetx="" phy="">PHY 1 on miibus0
Aug 4 17:25:42 kernel: miibus0: <mii bus="">on bfe0
Aug 4 17:25:42 kernel: bfe0: <broadcom bcm4401="" fast="" ethernet="">mem 0xf6800000-0xf6801fff irq 20 at device 5.0 on pci2
Aug 4 17:25:42 kernel: pci2: <acpi pci="" bus="">on pcib2
Aug 4 17:25:42 kernel: pcib2: <acpi pci-pci="" bridge="">at device 30.0 on pci0
Aug 4 17:25:42 kernel: usbus3: <intel 82801db="" l="" m="" (ich4)="" usb="" 2.0="" controller="">on ehci0
Aug 4 17:25:42 kernel: usbus3: EHCI version 1.0
Aug 4 17:25:42 kernel: ehci0: [ITHREAD]
Aug 4 17:25:42 kernel: ehci0: <intel 82801db="" l="" m="" (ich4)="" usb="" 2.0="" controller="">mem 0xf7000000-0xf70003ff irq 23 at device 29.7 on pci0
Aug 4 17:25:42 kernel: usbus2: <intel 82801db="" (ich4)="" usb="" controller="" usb-c="">on uhci2
Aug 4 17:25:42 kernel: uhci2: LegSup = 0x2f00
Aug 4 17:25:42 kernel: uhci2: [ITHREAD]
Aug 4 17:25:42 kernel: uhci2: <intel 82801db="" (ich4)="" usb="" controller="" usb-c="">port 0xd000-0xd01f irq 18 at device 29.2 on pci0
Aug 4 17:25:42 kernel: usbus1: <intel 82801db="" (ich4)="" usb="" controller="" usb-b="">on uhci1
Aug 4 17:25:42 kernel: uhci1: LegSup = 0x2f00
Aug 4 17:25:42 kernel: uhci1: [ITHREAD]
Aug 4 17:25:42 kernel: uhci1: <intel 82801db="" (ich4)="" usb="" controller="" usb-b="">port 0xd400-0xd41f irq 19 at device 29.1 on pci0
Aug 4 17:25:42 kernel: usbus0: <intel 82801db="" (ich4)="" usb="" controller="" usb-a="">on uhci0
Aug 4 17:25:42 kernel: uhci0: LegSup = 0x2f00
Aug 4 17:25:42 kernel: uhci0: [ITHREAD]
Aug 4 17:25:42 kernel: uhci0: <intel 82801db="" (ich4)="" usb="" controller="" usb-a="">port 0xd800-0xd81f irq 16 at device 29.0 on pci0
Aug 4 17:25:42 kernel: pci1: <acpi pci="" bus="">on pcib1
Aug 4 17:25:42 kernel: pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
Aug 4 17:25:42 kernel: agp0: <intel 82845g="" host="" to="" agp="" bridge="">on hostb0
Aug 4 17:25:42 kernel: pci0: <acpi pci="" bus="">on pcib0
Aug 4 17:25:42 kernel: pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
Aug 4 17:25:42 kernel: acpi_button0: <power button="">on acpi0
Aug 4 17:25:42 kernel: cpu1: <acpi cpu="">on acpi0
Aug 4 17:25:42 kernel: cpu0: <acpi cpu="">on acpi0
Aug 4 17:25:42 kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
Aug 4 17:25:42 kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
Aug 4 17:25:42 kernel: acpi0: reservation of 100000, 3ff00000 (3) failed
Aug 4 17:25:42 kernel: acpi0: reservation of 0, a0000 (3) failed
Aug 4 17:25:42 kernel: acpi0: Power Button (fixed)
Aug 4 17:25:42 kernel: acpi0: [ITHREAD]
Aug 4 17:25:42 kernel: acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 22
Aug 4 17:25:42 kernel: acpi0: <asus p4pe-x="">on motherboard
Aug 4 17:25:42 kernel: padlock0: No ACE support.
Aug 4 17:25:42 kernel: cryptosoft0: <software crypto="">on motherboard
Aug 4 17:25:42 kernel: kbd1 at kbdmux0
Aug 4 17:25:42 kernel: wlan: mac acl policy registered
Aug 4 17:25:42 kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc078c340, 0) error 1
Aug 4 17:25:42 kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Aug 4 17:25:42 kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
Aug 4 17:25:42 kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc078c2a0, 0) error 1
Aug 4 17:25:42 kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Aug 4 17:25:42 kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
Aug 4 17:25:42 kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xc078c200, 0) error 1
Aug 4 17:25:42 kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Aug 4 17:25:42 kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
Aug 4 17:25:42 kernel: module_register_init: MOD_LOAD (wpi_fw, 0xc098b9d0, 0) error 1
Aug 4 17:25:42 kernel: wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
Aug 4 17:25:42 kernel: wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
Aug 4 17:25:42 kernel: netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
Aug 4 17:25:42 kernel: ioapic0 <version 2.0="">irqs 0-23 on motherboard
Aug 4 17:25:42 kernel: cpu1 (AP/HT): APIC ID: 1
Aug 4 17:25:42 kernel: cpu0 (BSP): APIC ID: 0
Aug 4 17:25:42 kernel: FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
Aug 4 17:25:42 kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Aug 4 17:25:42 kernel: ACPI APIC Table: <asus p4pe-x="">Aug 4 17:25:42 kernel: avail memory = 1027575808 (979 MB)
Aug 4 17:25:42 kernel: real memory = 1073741824 (1024 MB)
Aug 4 17:25:42 kernel: Features2=0x4400 <cnxt-id,xtpr>Aug 4 17:25:42 kernel: Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Aug 4 17:25:42 kernel: Origin = "GenuineIntel" Id = 0xf25 Family = f Model = 2 Stepping = 5
Aug 4 17:25:42 kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.11-MHz 686-class CPU)
Aug 4 17:25:42 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Aug 4 17:25:42 kernel: sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
Aug 4 17:25:42 kernel: FreeBSD 8.1-RELEASE-p4 #1: Thu Aug 4 12:47:06 EDT 2011
Aug 4 17:25:42 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Aug 4 17:25:42 kernel: The Regents of the University of California. All rights reserved.
Aug 4 17:25:42 kernel: Copyright 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Aug 4 17:25:42 kernel: Copyright (c) 1992-2010 The FreeBSD Project.
Aug 4 17:25:42 syslogd: kernel boot file is /boot/kernel/kernel</fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></cnxt-id,xtpr></asus></version></software></asus></acpi></acpi></power></acpi></acpi></intel></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></broadcom></mii></bcm4401></vga-compatible></intel></mii></i82555></pci-isa></isa></intel></ata></ata></multimedia,></at></floppy></parallel></parallel></plip></printer></parallel></keyboard></at></ps></isa></system></generic></cpu></cpu></wdc></intel></intel></intel></intel></intel></intel></intel></intel></plextor></https></https> -
Aug 4 17:27:50 apinger: /usr/local/bin/rrdtool respawning too fast, waiting 300s.
Aug 4 17:26:50 apinger: Error while feeding rrdtool: Broken pipeAug 4 17:26:31This is a known bug: http://redmine.pfsense.org/issues/1399
It's not actually a problem.There have been a few problems with snapshots in the last few days. If you're running the latest daily build you are living on the edge! That does look like a lot of errors though.
You may wish to edit your post to remove your real IP address.
Steve
-
It appears that the apinger is causing the system to wait the 300 seconds there-by causing a large delay in boot time…
If its not going to be fixed, how about an option to disable it?Ntop - Would love to find a document that explains how to get and or install the update.
I thought there was something on the forums about the squidcache missing files was fixed but I cannot seem to locate it.
The Gateway issues I do not understand. I started down this path because of the Traffic Graph only shows my pppoe/Wan connection. Traffic Graph not showing the real Client connections confuses me to no end.
As for the IP in the post, thanks but one restart will fix that if needed. The one nice thing about a dynamic IP on DSL.... Need to get lost? Reboot / Renew
thanks
-
It doesn't cause a 5 minute delay in booting it just means the rrd tool isn't collecting data for 5 minutes.
It's in the system as a bug so will be fixed some time.Don't know about squid or ntop sorry! :P
I believe the gateway errors are simply early in the boot process before the WAN is up.
The traffic graph is on a per interface level not per IP. I saw your other post on this but the screen grab of Wingate is a bit too small to make out what it's showing.The beauty of dynamic IPs! :D
Steve
-
I asked one other time about monitoring client connections and the answer I got started me down the Reverse Proxy path… That leading me down the errors I am seeing.
For a better screen shot of the Wingate software connections page
http://forum.pfsense.org/index.php/topic,39474.0.htmlWould love to see this type of live connection info... Many times it has helped me ban whole sub-nets because of spanners trying to connect / hack the system
-
Hmm, yes that would be useful information.
Squid, although it can do it, is known as a bad reverse proxy. The pfSense package will not make it easy either. From memory it required some manual editing of config files to get it working at all.Steve
-
Well… That's why I am testing this.
I don't mind the startup / leaning issues so long as I can figure out in a few weeks of testing if I can get it done.At the same time I have an openSUSE server box I am working on. While not on-line yet, if pfSense does not pan out I will turn my efforts over to it.
btw: any recomandations on a working Reverse Proxy? or a way to get a simular screen working? ;D