CP on 1.2.3 Live CD install
-
pfsense box- 192.168.1.254
i pointed my computer to 192.168.1.254 for the gateway (right now a router does dhcp, dns, etc…i dont want to cause interference with the other PCs on the network until i figure out the CP).
i activated CP and started with local user access (yes, i created a local user) with a redirect to yahoo.com (my home page is google.com and i wanted to make sure it redirected properly).
i see the CP default login and i attempt with my test user...nothing. i click ok/submit and it just reloads the cp default login page.
i tried to set no authentication and the same page pops up.
any help is appreciated.
thanks.
-
nobody has configured a CP using 1.2.3?
-
Maybe 1.2.3 users haven't been here atleast 24hr period.. ;)
Have you checked wiki and tutorials? -
Maybe 1.2.3 users haven't been here atleast 24hr period.. ;)
Have you checked wiki and tutorials?used these:
http://forum.pfsense.org/index.php?topic=7397.0
http://doc.pfsense.org/smiller/Captive_Portal.htm
i can get to the CP default splash screen, but regardless if i have no authentication or local users for authentication, it just stays on the page if i click continue or put in the correct u/p and try to proceed.
if i set no authentication, should the default splash page still come up and allow the user to login w/o and credentials? obviously if i were using this in a real environment and i needed to have a splash page, i could create a page that said "welcome to …..., please click continue, ok....to proceed"
thanks.
-
Maybe you can find some answers here:
http://doc.pfsense.org/index.php/Category:Captive_Portal
http://doc.pfsense.org/index.php/Category:Howto
http://doc.pfsense.org/index.php/Category:FAQ
http://doc.pfsense.org/index.php/Category:Troubleshooting
-
@ptt:
Maybe you can find some answers here:
http://doc.pfsense.org/index.php/Category:Captive_Portal
http://doc.pfsense.org/index.php/Category:Howto
http://doc.pfsense.org/index.php/Category:FAQ
http://doc.pfsense.org/index.php/Category:Troubleshooting
thanks for those links. i have seen them already, but still handy and useful.
setting it up doesnt seem to be the issue. at least, i dont think it is, but i could be wrong. i followed the tutorial that i posed above and i am getting to the CP login screen. getting past that is the issue i am having.
-
I know that this is old topic but I met this issue and solved with these steps.
On the interfaces WAN page unchecked FTP Helper and changing firewall automatic outbound NAT to Manual .
-
I know that this is old topic but I met this issue and solved with these steps.
On the interfaces WAN page unchecked FTP Helper and changing firewall automatic outbound NAT to Manual .
thanks for the reply. FTP helper has 3 options, do i un-check all 3?