NAT only work in the PfSense BOX not other client in LAN [solved with 2.0]
-
Please help me here….i'v try to setting port forward to my internal web server but it can't be done.
The setting only can be done to SSH and WebConfiguration that located in the PfSense BOX itself (192.168.0.2), but it can't connect to web server at other ip (192.168.0.250)
here i put the print screen in my settings:
1.
2.
3.Help me solve this problems…
-
Your screenshots shows different ports on wan rule and portforward.
-
Thanks,
It like what i'm trying to do….my NAT setting is:
Interface: WAN
Protocol: TCP/UDP
Destination: x.x.x.10
Destination port range: 5555
Redirect target IP: 192.168.0.250
Redirect target port: HTTP -
And your screenshot of wan doesnt have that port. nearyst it has is 5331, which seems to be your management port for pfsense
-
How can i change the auto generated rules from NAT? The rules has been associated from NAT rules (Filter rule association).
-
And your screenshot of wan doesnt have that port. nearyst it has is 5331, which seems to be your management port for pfsense
I put some new rules in WAN Firewall but it sill not working
Interface: WAN
Protocol: TCP/UDP
Source: any
Destination: 192.168.0.250
Destination port range: any -
Have you tried to boot?
Just kidding. you're rules seems to be ok. My settings is almost the same and those work well.
That public ip address, is it hardware ip-address or some sort of virtual ip, if virtual what kind of? -
External IP add is hardware base, not virtual. I assign it manually. Reboot? not yet….it seem the port forward only respond in the BOX itself, could not go outside because the SSH and web-configuration can be access with out any problems. :'( What version do you used? i'm using
2.0-RC3 (i386)
built on Thu Aug 4 12:47:50 EDT 2011letter i try to reboot after all client gone off-line. :-[
-
No need to boot, it was a joke.
But the real question was, how many public ip-addresses you have and how many you try to use in this setup?
-
In that BOX i only used one, but in the ADSL router, we have 5 IP….
i think the problems is in the box because i can doNAT using Untangle server to the same web server....i think it bug..what version do you used?
-
Is there any reason to have routing dsl box between internet and pfsense? if not try to setup that in bridging mode. that ease up a little troubleshooting.
atm i'm using really old version(built on Mon Jul 11 19:53:22 EDT 2011 ) waiting a good time to update. i had no problems with the older ones so i'm not waiting problems when updating. -
no any routing there…just direct to the pf BOX...
the UTbox run fine for NAT, PFbox make me want to cry :'(
-
check this: wan side of your pfsense, does it get public ip or what kind of it gets?
-
Yes, it is public IP that i put it manually..i can ping the IP from outside.
-
Does your modem get public ip with dhcp or do you have static ip-addresses
-
my modem was setting to put the IP staticaly
-
What kind of connection you have to internet pppoe? or something else?
-
Yes PPPOE and the connection made in the modem
-
What if you change pppoe to the pfsense? and leave modem to be only mediaconverter(rj45 to rj11)
-
thats double NAT
you should make double port forward too …make pppoe dialed from pfsense, modem just on bridge
so NAT only on pfsense box, thats easier to troubleshoot then