How to: Get CPU temp

[Micro]

Ihaaaa !!!!!

You're a god steve !!!
Now it works with mbmon.
Indeed, with the command I built, the result wasn't exactly the same in the shell than with yours.
I thought it was OK but in fact it wasn't and now, with your help, it works fine.

Just a little correction, In your last post edit, you indicate this command line :
exec("/usr/local/bin/mbmon -I -c1 -T3", $dfout);
I don't know if the sensors are HW dependent but on my firebox X700, it seems that this command return the temperature of the chipset (77°C) and not the CPU one (40°C).

For the CPU, use :
exec("/usr/local/bin/mbmon -I -c1 -T1", $dfout);

I tested this by running the mbmon in loop while I unplugged the CPU FAN and the temperature of the first sensor has growed up while the third one staid unchanged.

So in order to sum up for the Firebox X700 users, if you want to have system temperature in your dashboard, follow these steps :
1- first of all, install the mbmon module on your system

Open SSH connection using putty, type 8 to go to the shell and type the following commands :

pkg_add -r mbmon
rehash

Now if you type

mbmon -c1

You should have something like :

Temp.= 38.0, 127.0, 77.0; Rot.=    0, 5000,    0
Vcore = 1.49, 3.38; Volt. = 3.31, 4.95, 11.61,  -3.12, -6.12

This means CPU temp is 38°C, second sensors seems to not be connected, and chipset temp is 77°C.
The CPU FAN speed is 5000 rpm.

2- Change the php files content :

change the has_temp and get_temp functions code

function has_temp() {

/* no known temp monitors available at present */

/* should only reach here if there is no hardware monitor */

return true;
}

function get_temp() {
$temp_out = "";
exec("/usr/local/bin/mbmon -I -c1 -T1", $dfout);
$temp_out = trim($dfout[[/color]0]);

return $temp_out;
}

The code for these functions is located in the /usr/local/www/includes/functions.inc.php

You can also change the line 240 of the /usr/local/www/widgets/widgets/system_information.widget.php file from

"border: 0px solid white;" size="30" name="tempmeter" id="tempmeter" value="****" />

to

"border: 0px solid white;" size="30" name="tempmeter" id="tempmeter" value="****" />

And that's it, you should now have the CPU temperature displayed in your dashboard of pfsense.

Note: as I'm not very friendly with linux tools like vi, I'm using WinSCP to get files from the pfsense box to my windows PC, change them with windows tools and put them back using WinSCP.
As told asterix, be careful to be in binary mode when transferring files with WinSCP.

Many thanks for steve and all the guys on this forum for their help.

Micro.

[stephenw10]

I too have two sensors that can be seen by mbmon in the X6000. I'm not sure which sensor is the CPU but sensor 3 is the highest so that's what I want to know about.

[2.0-RC3][root@pfsense.fire.box]/root(1): mbmon -I

Temp.= 36.0, 13.0, 40.5; Rot.= 5769, 5357, 5818
Vcore = 1.15, 2.26; Volt. = 3.38, 5.05, 12.10, -11.87, -0.62

I have to use the -I operator otherwise I get an error message about smb sensors.

If you don't like vi (like me!  ;)) then you can use the ee editor instead which is included in pfSense.

Steve

[CNLiberal]

I can use 'coretemp' and 'mbmon' from the CLI.  Both give a temperature response.  They are both different, but at least there's a number.  I have changed the appropriate widgets php file, but I'm not getting any temperature read out.  I know the changes I made are working, because I can now see the degrees C sign, but no temperature.  This makes me think there's something in the php code for the widget that's incorrect.  Has anyone else seen this?

Jim

[jimp]

Now just turn this all into a handy package we can put in the repo :-)

Really just need the amdtemp and coretemp modules for i386 and amd64 and some code to copy them in place. (We can put those on files.pfsense.org, they don't go into the packages repo.) The widget could be a separate file instead of part of the core system info, would coexist better that way.

You also do not need wget, use fetch, it's built in.

[seh2000]

@jimp:

Now just turn this all into a handy package we can put in the repo :-)

Really just need the amdtemp and coretemp modules for i386 and amd64 and some code to copy them in place. (We can put those on files.pfsense.org, they don't go into the packages repo.) The widget could be a separate file instead of part of the core system info, would coexist better that way.

You also do not need wget, use fetch, it's built in.

That will be so cool, I am really happy that for now I can see the temp on the dashboard despite I need to reedit after each snapshot, well what I done is  have the edited files on the file server so all I need is just to fire up WINscp to copy after an upgrade.
Steen

[stephenw10]

If it's built as a package it will re-install automagically after an update.  ;D
Which would be nice.

Steve

[Cino]

@stephenw10:

If it's built as a package it will re-install automagically after an update.  ;D
Which would be nice.

Steve

That would be nice, a system information wiget for intel/amd coretemp

[asterix]

Plus dash showing temperature for all cores for a multi-core processor. :D

[Cino]

@asterix:

Plus dash showing temperature for all cores for a multi-core processor. :D

or at least an avg of the cores? It cracks me up, I have an Atom D510 which has 2 cores but it displays 4 since HT is turned on. Cores 0-1 have the same temp and 2-3 have the same temp.

[jimp]

I wouldn't average them, if one core is running hot you'd probably want to know.

[seh2000]

Hi,

I use as per previous posts coretemp on a D510 CPU.

I done the below change to get the degree symbol.
°;C"; ?>" />
However, for after the first update to the Dashboard (think the update happens each 10 sec.) the degree symbol disappears. Only to come back if/when dashboard is reloaded. Anyone else seen this?

I still try to get all four core temp to be shown in the Dashbaord, but no success anyone here got this to work when using coretemp?

Steen

[stephenw10]

Yes I'm seeing that too. Hard to see why it's happening from the code.  :-\

Steve

[seh2000]

@stephenw10:

Yes I'm seeing that too. Hard to see why it's happening from the code.  :-\

Steve

Hi Steve - thanks as then I know I did not do something wrong!  ;D
Steen

[Cino]

@jimp:

I wouldn't average them, if one core is running hot you'd probably want to know.

true…. you would think they would be around the same temp since they are in the same package but i dont know much about the dual/quad core processors.

[seh2000]

@Cino:

I'm not a programmer but a couple of months ago we had a topic about about supermicro boards with ipmi builts.. http://forum.pfsense.org/index.php/topic,34056.30.html  Anyways, I copied the diag_system_activity.php page and change some of the code to display ipmi-sensors. I just did the same with coretemp. Its not on the dashboard but you can access it via the web interface.

Remove the .txt and upload it to /usr/local/www and you can access it via http://pfsense/diag_coretemp.php

To add it to the Diagnostics tab, add this to your config.xml:

 <installedpackages>[...]
		

<menu>
			<name>Core Temps</name>
			<tooltiptext>Core Temperatures</tooltiptext>
			Diagnostics
			<url>/diag_coretemp.php</url>
		</menu>

		[...]</installedpackages> 

Hi Cino,
Just followed your great writeup and it worked!
As attached screenshot shows.
Thanks!
Steen


[Cino]

@seh2000 good to hear!! i give all the credit to Scott Ullrich for making the original page.. I just changed some of the code for our needs :-)

[seh2000]

@stephenw10:

Yes I'm seeing that too. Hard to see why it's happening from the code.  :-\

Steve

Steve,
I am not a programmer, but if I replace the "C" with another symbol or take the "C" away then at the next update it is replaced with a "C" I believe this is from the command sysctl dev.cpu.0.temperature as the return is nn.nC so the degree symbol and the C added to the system_information.widget.php is overwritten, but this is only seen when other symbol in front or after the "C" is added or another letter e.g. "K". If the "C" is ommitted the it is not see when the dashboard is loaded, but appears at the 1st update.
Steen

[ariyako]

just in case you got HTTP ERROR 403 while wget from ptt.4mg.com/pfSense

then try this links

if you are on i386
http://www.ariyako.org/pfsense/coretemp32.zip

if you are on AMD64
http://www.ariyako.org/pfsense/coretemp64.zip

[jimp]

Even better:
http://files.pfsense.org/jimp/tempmon/

[ariyako]

@jimp:

Even better:
http://files.pfsense.org/jimp/tempmon/

WIN  ;D  :D