Snort Rules Download - 1.2.3

compucoder

Any current info about this available yet? I checked today and still no snort.org downloads happening. I did figure out how to install the rules manually so I can work around it for now but the auto update is sure nice.

Thanks.

asterix

Same here. Snort rules are not being downloaded. Did a clean install of pfsense 1.2.3

Something is definitely wrong.

SNORT.ORG >>> N/A
EMERGINGTHREATS.NET >>> 34e8f7d0ff7585cae81372ce095f8c64
PFSENSE.ORG >>> "e8a95fd5f1b40e878fedeffd585134bb"

Getting really ticked off now. >:( Moved from 2.0 RC3 to 1.2.3 just for Snort. And now it's broken here too. Not sure why changes are being done without proper testings. >:(

Cino

@asterix:

Same here. Snort rules are not being downloaded. Did a clean install of pfsense 1.2.3

Something is definitely wrong.

SNORT.ORG >>> N/A
EMERGINGTHREATS.NET >>> 34e8f7d0ff7585cae81372ce095f8c64
PFSENSE.ORG >>> "e8a95fd5f1b40e878fedeffd585134bb"

Getting really ticked off now. >:( Moved from 2.0 RC3 to 1.2.3 just for Snort. And now it's broken here too. Not sure why changes are being done without proper testings. >:(

have you tried to manually update? Search the forum, theres a couple of how-to's around.

Snort is working for the most part on 2.0 i386.. Still has some little bugs but its alerting and blocking. The core pfSense dev have taken over snort for 2.0 to get it back into working order… I dont know about 1.2.3.

Up until now, snort was not maintain by the core dev team but a single person who coded this during his spare time.

it wouldnt hurt to put a ticket in, but make sure you state its not working on 1.2.3

asterix

Manual updates don't work either. I tried my options before posting. Not sure why someone tries to fix something that ain't broken.

Cino

I could be wrong but I dont think anything change with 1.2.3 package.. I'm always looking at changes that are made to the pfsense and to the packages. I believe snort.org may have changed their website again. This has happen a couple of times and if you can't manually update, then I'm thinking that's the case.

I was able to download the rules using the below code… Now i don't have 1.2.3, so you will have to fine tune it for your dir and interfaces.... Also you may have to change the file-name to match the version of rules that the 1.2.3 package uses:


#!/bin/sh
cd /var/tmp
# get the update
fetch http://www.snort.org/pub-bin/oinkmaster.cgi/insert oink code here/snortrules-snapshot-2861.tar.gz
# unpack the update
tar -zxvf snortrules-snapshot-2861.tar.gz -C /usr/local/etc/snort/ rules/
# copy the rules to each interface snort is using 
cp /usr/local/etc/snort/rules/*.* /usr/local/etc/snort/[yourinterface2directory]/rules/
#cp /usr/local/etc/snort/rules/*.* /usr/local/etc/snort/[yourinterface3directory]/rules/
# repeat that for each interface You are using
# reload snort to use the new rules
/usr/local/etc/rc.d/snort.sh reload
rm snortrules-snapshot-2861.tar.gz

this site has the file names for snort 2.9 and 2.8.6

help this helps

asterix

Been there.. done that :D. Doesn't work.

Cino

@asterix:

Been there.. done that :D. Doesn't work.

works on 2.0 i386

asterix

Maybe.. but 1.2.3 is does not.. Kinda sux.

compucoder

I bit the bullet and upgraded to 2.0 RC3 last night. So far it is working perfectly. Every feature I used in Snort before works. The updater works properly now too.

I just did the 2.0 upgrade and it is using whichever version of Snort it had before and it all seems to be working fine.

So far 2.0 seems like a good route to take.

asterix

i386 or amd64 version? I suspect i386 as Snort is still broken on amd64

Highroller

@compucoder:

I bit the bullet and upgraded to 2.0 RC3 last night. So far it is working perfectly. Every feature I used in Snort before works. The updater works properly now too.

I just did the 2.0 upgrade and it is using whichever version of Snort it had before and it all seems to be working fine.

So far 2.0 seems like a good route to take.

Have you looked at SNORT to see whats running, I have had an issue with SNORT not starting and refuseing to start doing it manually. I have tried reinstalling and uninstalling so far no go. I thing there is a bug with 2.0 RC3 and SNORT, also have had an issue with HAVP anti virus hanging the system. After hours of working with them, I removed both and all issues went away.