LCDProc package update

Cino

I can't help but I hope cmb and jimp can. I noticed the updates you did a few months and manually edited them to my files. I can confirm they do work. I do like the MBUF Usage screen. If they are able help, do you think you could add a driver, lib (i386 and amd64) and some code so this driver can work? Its for a picolcd display. I dont know how to create a patch file but can upload them on my dropbox for you to look at if you have time.

Thanks,

Stephen

mdima

@Cino:

I can't help but I hope cmb and jimp can. I noticed the updates you did a few months and manually edited them to my files. I can confirm they do work. I do like the MBUF Usage screen. If they are able help, do you think you could add a driver, lib (i386 and amd64) and some code so this driver can work? Its for a picolcd display. I dont know how to create a patch file but can upload them on my dropbox for you to look at if you have time.

Thanks,

Stephen

hehe, thanks Stephen, I am glad someone used it…

Unfortunately I can only add x86 drivers, I am a very newbye in FreeBSD and I was only able to set up a x86 virtual machine in order to compile LCDProc... I was already adding the SureElec.so driver in the package xml and uploading next to another driver that has been distributed in the same way...
If you want I can recompile including also the picolcd driver and include it in the package or send it to you, but only for x86 unfortunately...

Cino

Yeah,if you can add the piclocd driver, that would be great!! Include it in the package. I currently have both the i386(i use this) and the amd64 driver(compiled myself). I was going to use amd64 but found some bugs of another package I use so i went back to i386.. I feel I will probably stay with i386 for a while.

For the past year, every time I would do a firmware update; I would copy over my hacked copies of php/xml to get lcdproc to work with lcdproc.. The driver at least never gets removed :-) It did once when i manually add 0.5.4 to the system but I created a quick update script to copy the files back.

I don't know much about the the backend of the pfsense packaging system but once you update the xmls, does it compile everything on their servers or do you have update pre-compile binaries?

mdima

Hi,
well, I don't know that too, I was adding my "already compiled" driver, so I don't know exactly how the pfSense compiling procedure works…

Tomorrow I will compile the driver at the office for the x86 architecture (where I have the vm) and I will update the xml, then I will post it on a reply on this message. I can't test if the driver works because I don't have that lcd panel, so I will wait for your feedback before posting them to the git archive, ok?

Have a nice evening,
Michele

Cino

@mdima:

Hi,
well, I don't know that too, I was adding my "already compiled" driver, so I don't know exactly how the pfSense compiling procedure works…

Tomorrow I will compile the driver at the office for the x86 architecture (where I have the vm) and I will update the xml, then I will post it on a reply on this message. I can't test if the driver works because I don't have that lcd panel, so I will wait for your feedback before posting them to the git archive, ok?

Have a nice evening,
Michele

Works for me :-) I check the git archive almost everyday when i'm at work. Oh, btw, are you using the new site? github? I remember coping your code from the old git site. You have a nice evening also.

Cino

i was checking my notes and there is another file that needs to be uploaded for the display to work. After it compiles the picolcd.so driver, can you also upload /usr/local/lib/libusb.so.2? This lib is needed for picolcd.so to work.

I also had to add references so i can pick the Com Port. I added this to lcdproc.xml, lcdproc.inc:
ugen0.2(/dev/ugen0.2)
ugen1.2(/dev/ugen1.2)
ugen2.2(/dec/ugen2.2)

and added after "case "bayrad":" in lcdproc.inc


				case "picolcd":
					$config_text .= "[{$lcdproc_config['driver']}]\n";
					$config_text .= "driverpath=/usr/local/lib/lcdproc/\n";
					$config_text .= "Device={$realport}\n";
					$config_text .= "Size={$lcdproc_config['size']}\n";
					$config_text .= "KeyTimeout=500\n";
					$config_text .= "Brightness=1000\n";
					$config_text .= "Blacklight_Timer=60\n";
					$config_text .= "Contrast=1000\n";
					$config_text .= "Keylights=on\n";
					$config_text .= "Key0Light=on\n";
					$config_text .= "Key1Light=off\n";
					$config_text .= "Key2Light=off\n";
					$config_text .= "Key3Light=off\n";
					$config_text .= "Key4Light=off\n";
					$config_text .= "Key5Light=off\n";
					break;

I just checked my box and I have it configured to use ugen2.2. When I ran usbconfig on the box, its on ugen0.2. Doesn't make sense but it works.

Here is a copy of all the files that i copy over after installing the lcdproc package if you want to reference:

http://dl.dropbox.com/u/11597356/pfSense/lcdpro%20files/lcdproc-picolcd.tar.gz

stephenw10

@Cino:

I don't know much about the the backend of the pfsense packaging system but once you update the xmls, does it compile everything on their servers or do you have update pre-compile binaries?

That's not how the package system works. It's independent of the pfSense build system. It's up to the package maintainer to keep it working if something big is changed in pfSense. There's quite a lot of good infomation over in the dev wiki but it's a bit spread out. I've been trying to assimilate it over the past few months! ::)
Mostly the package system gives you an easy way to have a nice GUI for your package that's all tied in with the main pfSense GUI. It also handles installing and uninstalling the package and reinstalling after a firmware update.

@mdima, I'm interested in the exact syntax you have used for compiling the driver for lcdproc as I've been struggling to do the same for some time. :-\

Steve

Cino

Thanks Steve! I've done some reading also and not there yet to create my own.

@mdima Take a look here, looks like you need to open a ticket http://forum.pfsense.org/index.php/topic,25519.msg132491.html#msg132491

mdima

@stephenw10:

@mdima, I'm interested in the exact syntax you have used for compiling the driver for lcdproc as I've been struggling to do the same for some time. :-\

Steve

Hi, I was using the syntax I got from the instructions, with the parameter –enable-drivers=all
I just run:

./configure --enable-drivers=all
make

and it made the job…

stephenw10

Thanks for that. :)
I managed to get it to compile in the end. My biggest problem was a typo I made in the config files while adding the driver. :-[

Actually I might take this opportunity to document the process if you don't mind me hi-jacking your thread.

Steve

mdima

@Cino:

Thanks Steve! I've done some reading also and not there yet to create my own.

@mdima Take a look here, looks like you need to open a ticket http://forum.pfsense.org/index.php/topic,25519.msg132491.html#msg132491

OK! Sorry for the delay but I just got back from my "summer break" and the urgent stuff was stucking me…

Also, it took a lot of time because I wanted to compile also the picolcd driver, but it's really hard, at least for me, since I should install also the libusb library that is needed but I don't know where to install them... btw, in the end I was using the drivers from your dropbox, and I used the x86 version...

At this address (http://staff.nt2.it/lcdproc.zip) you can download the files to install on the pfSense box. The files in the /bin directory should be copied on the box in the directory /usr/local/lib/lcdproc, the others in the directory /usr/local/pkg.

This files are the "merge" of the files I changed + your changes (serial ports, parameters of the picolcd, and so on) + the driver binary files for picolcd... on my system the package works, if it works on your system also I update my git branch and will ask again to update the main repository with the files from my branch in order to install the updated package directly from the webconfigurator... ok?

Thanks,
Michele

mdima

@stephenw10:

Thanks for that. :)
I managed to get it to compile in the end. My biggest problem was a typo I made in the config files while adding the driver. :-[

Actually I might take this opportunity to document the process if you don't mind me hi-jacking your thread.

Steve
[/quote]

no, it's fine! I really thought that the LCDProc package was kind of dead, because it was not updated since a lot of time, and the mantainer's email is not reachable anymore… but as I see everyone is implementing his own changes by himself and this can lead to a mess...

Now I was "merging" the changes that Cino and I did to the package, if you want we can merge also yours, in order to update the package in the repository... what do you think about that?

Cino

Michele, I wont be able to see my display until later this evening but I'll let you know how it turns out… And thank you very much!!

mdima

@Cino:

Michele, I wont be able to see my display until later this evening but I'll let you know how it turns out… And thank you very much!!

Don't worry, it's fine! I look forward to hearing a feedback from you!

Cino

@mdima:

Also, it took a lot of time because I wanted to compile also the picolcd driver, but it's really hard, at least for me, since I should install also the libusb library that is needed but I don't know where to install them… btw, in the end I was using the drivers from your dropbox, and I used the x86 version...

the libusb library, a full install of FreeBSD includes this lib. Don't know if it makes a difference, but I've put libusb.so.5 in the /usr/local/lib directory. We don't need libkvm.so.5 lib anymore. This is included with the current snapshots of pfsense.

I had problems trying to compile all the drivers for lcdproc from source-code using ./configure –enable-drivers=all. I signed up for the lcdproc mailing list and was told instead of compiling from SC, use the Port from the package system and tell that to configure all the drivers... Doing this, I was able to get all the drivers for with no errors since the package knew where all the libs that were needed.

stephenw10

Mostly to remind myself how I did it here are the steps I took to compile a new driver for LCDproc for the package under 2.0.

I started with an install of FreeBSD 8.1_release.
First install the FreeBSD port of LCDproc. Goto /usr/ports/sysutils/lcdproc and type make. This will download all the sources and dependencies for LCDproc 0.5.3 and build them.
Then follow the instructions from the LCDproc site, here, to add your new driver. There are some parts of these that are unclear. ;)
The driver I'm adding is specific to the Watchguard Firebox, which causes problems later, named sdeclcd.
Editing acinclude.m4 is as per the instructions, as long as you don't make a typo! Editing Makefile.am was more involved.
For step 2 I needed:```
sdeclcd_LDADD = libLCD.a libbignum.a

And for step 3 I needed:```
 sdeclcd_SOURCES =    lcd.h lcd_lib.h sdeclcd.c sdeclcd.h report.h

Next you need to run autogen.sh but that's not included in the FreeBSD port so download it from here to /usr/ports/sysutils/lcdproc/work/lcdproc-0.5.3.
Then you can run ./configure –enable-drivers=sdeclcd (or whatever your driver is or all to build every driver) and then make to build the driver. sdeclcd.ko in my case.

You then need to edit the files from the lcdproc package to allow the new driver to be selected and loaded. This is still a work in progress for me as the driver is a special case.

Steve

Cino

i copied the package files over and it worked for me. I did leave the libusb in the /usr/local/lib directory tho.

reading steve's post, i believe that was the same thing i did when i trying to get the driver i needed.

mdima

@Cino:

i copied the package files over and it worked for me. I did leave the libusb in the /usr/local/lib directory tho.

ok, I updated the files in my git clone… today I will mail Jim and ask how to do that... I keep you updated!

Ciao,
Michele

Cino

Thanks Michele!

stephenw10

Assides from having to add your driver are either of having problems with the lcdproc package?

Because I intended to modify the package I first setup my own local repo as detailed here.
I have had a lot of trouble getting the package up and running. A lot of my problems were caused by the fact that, despite putting the .htaccess file in every directory I could, the php files from the package are being executed by my server rather than served. >:(
However even having moved the php file manually I am getting errors. The lcdproc_client.php file will not run such that I just see the output of LCDd on the LCD. Running /tmp/lcdclient.sh manually gives:

Fatal error: Cannot redeclare array_combine() in /usr/local/pkg/lcdproc_client.php on line 84

Commenting out the array_combine function and the CPU usage function which depends on it allows it to run.
I have no idea why this won't run for me yet other people aren't complaining. ???

Steve