PPPoE WAN fails to reconnect
-
cat /tmp/pfSense_version
Wed Aug 24 11:09:10 EDT 2011
2.0-RC3 (amd64)
built on Fri Aug 12 15:32:25 EDT 2011
Platform nanobsd (2g)I recently acquired a backup WAN and I've been testing failover. My primary WAN is PPPoE (multilink on vlans) and when I pull the plug on the modem-connected pfsense interface failover kicks in nicely.
The problem is when I plug the modem-connected interface back in. pfsense is never able to reestablish a pppoe connection until I reboot it. The PPP log shows persistent repeated connection attempts on all modem interfaces, but they all time out. I tried disabling then reenabling the WAN interface, but subsequent pppoe connection attempts still fail. Rebooting pfsense brings up all pppoe sessions nearly instantly, as expected.
I believe this is a bug.
-
Having only a single wan, so i'm not able to say how this work, but does it seem that pfsense is not trying to monitor primary wan after failover state?
-
I do see connection reattempts in the PPP log though. I'll post them next time this happens.
-
this is an old issue related to mpd and many others and i have reported it but i guess the developers are not able to reproduce so no1 seems to be working on it to fix it
-
here is the long thread on the same matter, no fix for it, its since 2.0 and when mpd was upgraded to 5 which has made pfsense 2.0 very unreliable for me regarding pppoe only, rest all work fine, older mopd used to be brillant and no matter a power failure, cable unplug or any other situation, pppoe used to reconnect in a single attempt without issues.
http://forum.pfsense.org/index.php/topic,35475.0.html