Multi wan and static routes

jacobo.jajati

Good Evening to all.

I used PF a few years ago on version 1.2.X and did some basic configuration. Now im setting up a network for a company and i had a couple of questions

MULTIWAN.
I have read here and there that when using MULTIWAN i need to set up the gruops in routing and also a NAT rule. If i use the setup wizard for MULTIWAN woudl i still need to setup NAT rules or woudl the wizard do it by itself?

STATIC ROUTE.
Im having trouble seting up a static router and i need some help please

LAN interface: 192.168.0.1 255.255.0.0
Wan interface 1: XXX.XXX.XXX.XXX (fiber t1)
Wan Interface 2: XXX.XXX.XXX.XXX (STATIC DSL MODEM) NON PPPOE
Wan Interface 3: XXX.XXX.XXX.XXX (STATIC DSL MODEM)NON PPPOE
Wan Interface 4: 200.XXXX.XXX.201 255.255.255.0

I need the clients to access server on the server on 200.XXX.XXX.XXX network but i cant ping. Do i need to add a static route?

Any help would be appraciated

JJG

jimp

Are you using 1.2.3 or 2.0?

There is no wizard that sets up multi-wan. There is one that does traffic shaping for an existing multi-wan setup, but not one that does the actual multi-wan seutp.

If you're on 2.0, follow this here: http://doc.pfsense.org/index.php/Multi-WAN_2.0
Pay attention especially to the part about policy route negation.

jacobo.jajati

THANKS FOR THE HELP I GOT IT WORKING!!!!