NAT only work in the PfSense BOX not other client in LAN [solved with 2.0]

syedadi

Thanks :D

syedadi

still no luck for me to do the 'NAT'ing…i've try other distro, the NAT went smoothly with out any trouble..i need to setup the nat in the pfsense.... :'( now using built on Wed Aug 24 10:02:03 EDT 2011

Metu69salemi

Screenshots would do miracles

syedadi

this is my digram

How can i trace i NAT respond? so i can know where the problems is? The screen shoot for the firewall as the 1st page…

Metu69salemi

you don't have to keep public ip in your modem, unless you want to connect that from wan/lan

I tried earlier to say, that put anything what modem does into pfsense: pppoe authentication etc. so your modem is only a dummy media converter(from network jack to modem jack)

syedadi

Thanks bro,

So if i make the authentication form PfSense server; can i put other server to the modem because my modem have 4 more free ports and i have 4 more IPs…would the server have their own public-IP for this setup?

Metu69salemi

Why you need to put them to modem, pfsense can handle all of those, within hardware limitations.
Just draw a picture where you show what you have and what you want. That helps a lot to "design" your network and setup pfsense.

As an example(my setup):

internet -- modem -- pfsense -- lan1- lan3

5 static ip's all handled from pfsense, with previous setups i had only one(smoothwall didn't handle more than one, and pfsense handle as many as you want)

Before i got 4 extra ip's i worked that every different lan(lan1, lan2 & lan3) natted with one public ip, now i have each lan with own ip + two different public ip's for server usage.

All servers are in lan1 as my own lan. Servers use different public ip's than the rest of lan1.

I wrote this up only for show, that pfsense is capable doing lot if set it up

syedadi

OK, i understand…

i need more time for migrate to that setup...len me think 1st...so i need to add one more LAN in the pfsense.
Thanks

syedadi

OK….
now i can put the NAT working port port scann only (port 80), when i used the http://www.yougetsignal.com/tools/open-ports/ the port is open, but then i try to access port 80 from the web-browser, it can't be display…how can i troubleshoot this?

syedadi

Thanks all, the release version 2.0 has solved my problems…. =)