Stge nic
-
stge not work in v2 nanoversion.
none0@pci0:0:14:0: class=0x020000 card=0x81801043 chip=0x102313f0 rev=0x41 hdr=0x00 class = network subclass = ethernet
stge work in full install version normal
Sep 27 15:38:38 openbsd kernel: stge0: <sundance st-1023="" gigabit="" ethernet="">port 0x1400-0x14ff mem 0x44300000-0x443000ff irq 10 at device 14.0 on pci0 Sep 27 15:38:38 kernel: miibus1: <mii bus="">on stge0 Sep 27 15:38:38 kernel: ip1000phy0: <ic 10="" 100="" 1000="" plus="" media="" interface="">PHY 24 on miibus1 Sep 27 15:38:38 kernel: ip1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto Sep 27 15:38:38 kernel: stge0: [ITHREAD]</ic></mii></sundance>
-
Try downloading this and putting it in /boot/modules/
http://files.pfsense.org/jimp/ko-8.1/i386/if_stge.ko
(if you're on amd64, put that in the url instead of i386)
Then add if_stge_load="YES" to /boot/loader.conf.local
-
Please include stge driver in base system.
After this procedure nic is up and recognized.stge0@pci0:0:14:0: class=0x020000 card=0x81801043 chip=0x102313f0 rev=0x41 hdr=0x00 class = network subclass = ethernet
stge0: flags=108843 <up,broadcast,running,simplex,multicast,ipfw_filter>metric 0 mtu 1500 options=8209b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,linkstate>ether 00:1d:60:5c:xx:yy inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::21d:60ff:fe5c:e576%stge0 prefixlen 64 scopeid 0x2 nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex,flag0,flag2>) status: active</full-duplex,flag0,flag2></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,linkstate></up,broadcast,running,simplex,multicast,ipfw_filter>
~20 MBits/sec on my old P2
last pid: 51498; load averages: 0.21, 0.10, 0.08 up 0+00:14:48 14:04:53 86 processes: 3 running, 70 sleeping, 13 waiting CPU: 12.1% user, 0.0% nice, 8.2% system, 27.6% interrupt, 52.1% idle Mem: 37M Active, 19M Inact, 36M Wired, 30M Buf, 111M Free Swap: PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND 10 root 171 ki31 0K 8K RUN 11:29 42.97% idle 11 root -68 - 0K 112K WAIT 0:43 25.98% {irq11: fxp0} 11 root -68 - 0K 112K RUN 0:36 21.97% {irq10: stge0}