::Gak Perlu Ragu Pake RC1 64bit untuk Mesin [Proxy] Anda::
-
bener satu kabel yg keluar dr powersuply rakitan dipasang hd 2 aja kadang bunyi bunyian apalagi 3, trus satu kabelnya lg ada beban misal fun kipas banyak, terus MB. pokoknya sy setuju dengan terpisah td, kecuali sy test di PC server emang beneran satu kabel ada 3 sata dan satunya lg 3 sata (di HP proliant mini server) masih ok tuh
-
yup …
untuk server produksi seyogianya jangan pake yg abal2 ... :)
budget terbatas pun, kalau cermat bisa disiasatiom vote utk pake power supply yg ex built up saja
efficiency power diatas rata2, kl dapet yg sudah include Active PFC lebih beruntung lagi -
klau misalkan tetep pake power supplay satu? cuma watt nya besar 500w (simbadda) ato lebih? manteb kali pak? ngak wuz…. wuz... lagi.....? malah bisa, wazz... wezz... wuzz.... wozz..... hasilnya...? ato, clap... clap.... clap..... kyak kilatan petir..............?
tulisan watt di power suplay biasanya hanya sekedar tulisan aja misalkan 500W, cuba anda ukur pake tester, beneran 500w ga keluarannya. kalo merk power suply seperti corsair sih, amin he he cuman harganya berlipat, saya sendiri lebih cenderung menggunakan yang bekas built up aja, merk dell ato hp trus kasih 2 biji….rasanya mantabbbbb
hari ini sy dah test ok pak... 2 power supply yg merek abal abal dua - duanya ok buangetttt : 1) MB + kipas fun 2) semua hd (yg ata jd ok juga ....) thks pak.
maaf untuk yg punya topik bapaku, ini kok membahas powersupply jadinya.. ha...ha..gara2 bapak kapten tuh, TRIMS banyak bapak kaptenuntuk server AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (vga512mb) yg 2powersupply ini sy namakan "si GANAS" maaf krn setiap server dengan karakternya saya kasih nama, ha…ha..
-
nyoba pfsense 2.0 release? amd64, install luscanya kok error ya? apa temen2 disini ngalamin seperti saya ya?
-
nyoba pfsense 2.0 release? amd64, install luscanya kok error ya? apa temen2 disini ngalamin seperti saya ya?
keteranganya seperti ini…..................?
Installation of lusca-cache FAILED!
Beginning package installation for lusca-cache...
Downloading package configuration file... done.
Saving updated package information... done.
Downloading lusca-cache and its dependencies...
Checking for package installation...
Downloading http://sites.google.com/site/chudyfernandez/8/amd64/squid_radius_auth-1.10.tbz ... could not download from there or http://ftp2.FreeBSD.org/pub/FreeBSD/ports/amd64/packages-8.1-release/All/squid_radius_auth-1.10.tbz.
of squid_radius_auth-1.10 failed!Installation aborted.Backing up libraries...
Removing package...
Starting package deletion for lusca-cache-r14850...done.
Starting package deletion for perl-5.10...done.
Starting package deletion for squid_radius_auth-1.10...done.
Starting package deletion for libwww-5.4.0_4...done.
Removing lusca-cache components...
Tabs items... done.
Menu items... done.
Services... done.
Loading package instructions...
Include file squid.inc could not be found for inclusion.
Deinstall commands...
Not executing custom deinstall hook because an include is missing.
Removing package instructions...done.
Auxiliary files... done.
Package XML... done.
Configuration... done.
Cleaning up... Failed to install package.Installation halted.
-
Om serang aku mau tanya Apa pfSense-2.0-RELEASE-amd64.iso bisa aku install di mesin Intel.. kalo bisa Intel Processor brp ya om..
aku juga dan coba install pfSense-2.0-RELEASE-i386.iso dan pfSense-2.0-RELEASE-amd64.iso pada mesin intel XEON ko stop di 38%
Istopnya disini om –-> /usr/local/bin/cpdup -vvv -l -o /usr/mnt/usr --> cuma sampe 38%Tolong dibantu Om apa yg harus di laksanakan..
-
Om serang aku mau tanya Apa pfSense-2.0-RELEASE-amd64.iso bisa aku install di mesin Intel.. kalo bisa Intel Processor brp ya om..
aku juga dan coba install pfSense-2.0-RELEASE-i386.iso dan pfSense-2.0-RELEASE-amd64.iso pada mesin intel XEON ko stop di 38%
Istopnya disini om –-> /usr/local/bin/cpdup -vvv -l -o /usr/mnt/usr --> cuma sampe 38%Tolong dibantu Om apa yg harus di laksanakan..
procesornya hanya mendukung x86 kali???? :o :o :o
-
nyoba pfsense 2.0 release? amd64, install luscanya kok error ya? apa temen2 disini ngalamin seperti saya ya?
keteranganya seperti ini…..................?
Installation of lusca-cache FAILED!
Beginning package installation for lusca-cache...
Downloading package configuration file... done.
Saving updated package information... done.
Downloading lusca-cache and its dependencies...
Checking for package installation...
Downloading http://sites.google.com/site/chudyfernandez/8/amd64/squid_radius_auth-1.10.tbz ... could not download from there or http://ftp2.FreeBSD.org/pub/FreeBSD/ports/amd64/packages-8.1-release/All/squid_radius_auth-1.10.tbz.
of squid_radius_auth-1.10 failed!Installation aborted.Backing up libraries...
Removing package...
Starting package deletion for lusca-cache-r14850...done.
Starting package deletion for perl-5.10...done.
Starting package deletion for squid_radius_auth-1.10...done.
Starting package deletion for libwww-5.4.0_4...done.
Removing lusca-cache components...
Tabs items... done.
Menu items... done.
Services... done.
Loading package instructions...
Include file squid.inc could not be found for inclusion.
Deinstall commands...
Not executing custom deinstall hook because an include is missing.
Removing package instructions...done.
Auxiliary files... done.
Package XML... done.
Configuration... done.
Cleaning up... Failed to install package.Installation halted.
wkakakkak… mangkanya jangan sering instal2 aja
klo dah manteng di rc1 dah.
update itu belum tentu bagus... dan butuh waktu ngoprek ;D ;D ;D
klo instal bisa banyak cara sampe runing tapi permasalahannya buat hit youtube 0 coba di instal pake pf123 atau sebelumnya gamana?
++++++++++++++++++++++++++++++++ini di 2.0-RC3 (amd64)
built on Tue Jun 21 23:08:07 EDT 2011Intel(R) Xeon(TM) CPU 3.20GHz
Sun Oct 2 13:21:27 WIT 2011ini warnet lg tutup baru sy liat yg maen yg punyanya doang, youtube ter hit dgn baik :
HTTP/1.1 200 OK
Server: Lusca
Date: Sun, 02 Oct 2011 06:16:13 GMT
Content-Type: text/plain
Expires: Sun, 02 Oct 2011 06:16:13 GMT
X-Cache: MISS from gipang.net
Transfer-Encoding: chunked
Connection: closeCache information for squid:
Request Hit Ratios: 5min: 41.4%, 60min: 31.3%
Byte Hit Ratios: 5min: 44.8%, 60min: 44.1%
Request Memory Hit Ratios: 5min: 2.6%, 60min: 2.0%
Request Disk Hit Ratios: 5min: 60.8%, 60min: 70.6%
dicoba youtube yg ga pernah di buka
http://www.youtube.com/watch?v=0habxsuXW4g&ob=av2e (Cache cantic wajib disimpan di hardisk)
buka lagi:
6 o-o.preferred.pttelkom-bth1.v18.lscache7.c.youtube.com (Squid user access report)
weih .. sekejap mata akses hit (liat dibawah taksbar merahnya yg jalan itu..)bedanya sama yg diinstal sekarang sepertinya proxy yg jalan bukan lusca, hit di jpg2 url saja
cirinya liat di hd walaupun hit besar tp hd yg kepake sedikit saja -
ini keterangan yg ada di script lusca.sh
version=
uname -r | sed ' s/ \([0-9]\).* /\1/'
if [ "$version" = 8 ]; then
echo "Warning lusca was
not compiled for freebsd8"
echo "Lusca may run slow
and with some errors"kalo mau cek versi freebsd on pfsense lwt command
uname -mrs
freebsd versi berapakah yg sdang berjln di pfsense.
-
aku mau tanya Apa pfSense-2.0-RELEASE-amd64.iso bisa aku install di mesin Intel.. kalo bisa Intel Processor brp ya om..
aku juga dan coba install pfSense-2.0-RELEASE-i386.iso dan pfSense-2.0-RELEASE-amd64.iso pada mesin intel XEON ko stop di 38%
Istopnya disini om –-> /usr/local/bin/cpdup -vvv -l -o /usr/mnt/usr --> cuma sampe 38%Tolong dibantu Om apa yg harus di laksanakan..
LHa itu om poscom juga pake mesin Intel XEON malah hit youtube mantap sekali….
..
-
Om Serang XEON ku apa termasuk 64bit sebab aku dah coba intall dengan i386 atau amd64 tetep hang di 38% mainboardnya Merk caviar g41-3 xeon
-
aku juga dan coba install pfSense-2.0-RELEASE-i386.iso dan pfSense-2.0-RELEASE-amd64.iso pada mesin intel XEON ko stop di 38%
Istopnya disini om –-> /usr/local/bin/cpdup -vvv -l -o /usr/mnt/usr --> cuma sampe 38%om coba di cek kabel hardisknya ( ganti baru kabelnya)
sama cek juga hardisk nya barangkali bit nya korup.tast test aja..
-
Sudah dicek n diganti-ganti bahkan harddisknya sata ke ata, lan dimatiin dulu dibiosnya jg udah tetep nyangkut di 38% sama orang bule juga ada yg kasus ginian http://forum.pfsense.org/index.php?action=printpage;topic=31907.0 ada yg bisa bantu…?
-
Sudah dicek n diganti-ganti bahkan harddisknya sata ke ata, lan dimatiin dulu dibiosnya jg udah tetep nyangkut di 38% sama orang bule juga ada yg kasus ginian http://forum.pfsense.org/index.php?action=printpage;topic=31907.0 ada yg bisa bantu…?
Lha ente apa dah coba solusi dari link diatas…?
Mengutip beberapa kalimat dari link diatas sperti ini :
by Terafloppy
_Ok I think I solved it (worked for me).You must be sure to enable Virtual Technology in the BIOS for the CPU settings. After that 2.0 Feb 8 installed all the way, (use to hang at 45%).
I think Pfsense sees that the CPU is VT capable and attempts to load a module or service to interact with that ability. However, even though the CPU advertises this capablity, it may not actually have the feature turned on, thus breaking the install.
Anyway, no promises, but this worked for me._
-
hanya penasaran …
itu asli pake pros Xeon ?
mantap ...
om cukup bersahabat dengan yg 64 bit
sudah coba download iso dari lokasi yg lain, bad iso perhap ?
coba di defaultkan saja bios nya dulusemoga bisa membantu
-
klo namanya OS pf amd64bit itu sekedar nama, artinya ga mesti merek proc. amd64.
sy test dgn RC1 amd di seri pentium d ecek2 sampe sekarang ok banget ga ada debug2 erorr
di pentium4 LGA dell 3ghz sampe sekarang juga.
yg penting 64bit makannya RAM, ga tau minumnya apa? ;D -
Oo gitu Mr. Poscom, aku dh coba.. tp emang tetep Stop di 38% mungkin masalah bios kali ya.. tp tetap dicoba lg ampe running.. ;D ;D ;D
-
yah bener, sy juga ngalami, kadang dah runing 1hr kena debug, sepertinya amd ikut iklan di pf 2.0
-
Aku dah coba install melalui cpu lain karena hang 38% terus, setelah itu harrdisnya aku kembalikan ke cpu xeon dan running good, after 12 jam terjadi error diserverku dan ini diagnos nya tolong dibedah apa kira2 penyebabnya
$ dmesg
Copyright
1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p4 #0: Tue Sep 13 17:04:54 EDT 2011
root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.13-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Family = f Model = 4 Stepping = 1
Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x641d <sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr>AMD Features=0x20100800 <syscall,nx,lm>TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2015756288 (1922 MB)
ACPI APIC Table: <030811 APIC1634>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <version 2.0="">irqs 0-23 on motherboard
netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
wlan: mac acl policy registered
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e30, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548f0, 0) error 1
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cf0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d90, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <030811 RSDT1634> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7dd00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
vgapci0: <vga-compatible display="">port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <intel g41="" svga="" controller="">on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, hda="">at device 27.0 (no driver attached)
pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
pcib2: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
pci2: <acpi pci="" bus="">on pcib2
re0: <realtek 10="" 8101e="" 8102e="" 8102el="" 8103e="" pcie="" 100basetx="">port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
miibus0: <mii bus="">on re0
rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: [FILTER]
uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0xc880-0xc89f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">on uhci0
uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0xc800-0xc81f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">on uhci1
uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0xc480-0xc49f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">on uhci2
uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0xc400-0xc41f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">on uhci3
ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">on ehci0
pcib3: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci3: <acpi pci="" bus="">on pcib3
rl0: <realtek 10="" 8139="" 100basetx="">port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 1.0 on pci3
miibus1: <mii bus="">on rl0
rlphy1: <realtek internal="" media="" interface="">PHY 0 on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: [ITHREAD]
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich7="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
acpi_button0: <power button="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <parallel port="" bus="">on ppc0
plip0: <plip network="" interface="">on ppbus0
plip0: [ITHREAD]
lpt0: <printer>on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <parallel i="" o="">on ppbus0
atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <ps 2="" mouse="">irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
orm0: <isa option="" rom="">at iomem 0xc0000-0xcc7ff on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 152627MB <seagate st3160212as="" 3.aah="">at ata0-master UDMA100 SATA
ugen0.1: <intel>at usbus0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen1.1: <intel>at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
ugen2.1: <intel>at usbus2
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
ugen3.1: <intel>at usbus3
uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
ugen4.1: <intel>at usbus4
uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
pflog0: promiscuous mode enabled
rl0: link state changed to UP
pid 55423 (squid), uid 100: exited on signal 6
pid 58081 (squid), uid 100: exited on signal 6
pid 60391 (squid), uid 100: exited on signal 6
pid 61043 (squid), uid 62: exited on signal 6
pid 9810 (squid), uid 62: exited on signal 6
pid 10253 (squid), uid 62: exited on signal 6
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system processvnlru' to stop…done Waiting (max 60 seconds) for system processbufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p4 #0: Tue Sep 13 17:04:54 EDT 2011
root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Family = f Model = 4 Stepping = 1
Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x641d <sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr>AMD Features=0x20100800 <syscall,nx,lm>TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2015756288 (1922 MB)
ACPI APIC Table: <030811 APIC1634>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <version 2.0="">irqs 0-23 on motherboard
netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
wlan: mac acl policy registered
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e30, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548f0, 0) error 1
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cf0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d90, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <030811 RSDT1634> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7dd00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
vgapci0: <vga-compatible display="">port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <intel g41="" svga="" controller="">on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, hda="">at device 27.0 (no driver attached)
pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
pcib2: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
pci2: <acpi pci="" bus="">on pcib2
re0: <realtek 10="" 8101e="" 8102e="" 8102el="" 8103e="" pcie="" 100basetx="">port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
miibus0: <mii bus="">on re0
rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: [FILTER]
uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0xc880-0xc89f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">on uhci0
uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0xc800-0xc81f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">on uhci1
uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0xc480-0xc49f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">on uhci2
uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0xc400-0xc41f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">on uhci3
ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">on ehci0
pcib3: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci3: <acpi pci="" bus="">on pcib3
rl0: <realtek 10="" 8139="" 100basetx="">port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 1.0 on pci3
miibus1: <mii bus="">on rl0
rlphy1: <realtek internal="" media="" interface="">PHY 0 on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: [ITHREAD]
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich7="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
acpi_button0: <power button="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <parallel port="" bus="">on ppc0
plip0: <plip network="" interface="">on ppbus0
plip0: [ITHREAD]
lpt0: <printer>on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <parallel i="" o="">on ppbus0
atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <ps 2="" mouse="">irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
orm0: <isa option="" rom="">at iomem 0xc0000-0xcc7ff on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 152627MB <seagate st3160212as="" 3.aah="">at ata0-master UDMA100 SATA
ugen0.1: <intel>at usbus0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen1.1: <intel>at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
ugen2.1: <intel>at usbus2
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
ugen3.1: <intel>at usbus3
uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
ugen4.1: <intel>at usbus4
uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
pflog0: promiscuous mode enabled
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UPFatal trap 9: general protection fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x20:0xffffffff80f007fb
stack pointer = 0x28:0xffffff802e46eb30
frame pointer = 0x28:0xffffff802e46ec30
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 23272 (rate)
Copyright 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p4 #0: Tue Sep 13 17:04:54 EDT 2011
root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.13-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Family = f Model = 4 Stepping = 1
Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x641d <sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr>AMD Features=0x20100800 <syscall,nx,lm>TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2015756288 (1922 MB)
ACPI APIC Table: <030811 APIC1634>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <version 2.0="">irqs 0-23 on motherboard
netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
wlan: mac acl policy registered
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e30, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548f0, 0) error 1
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cf0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d90, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <030811 RSDT1634> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7dd00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
vgapci0: <vga-compatible display="">port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <intel g41="" svga="" controller="">on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, hda="">at device 27.0 (no driver attached)
pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
pcib2: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
pci2: <acpi pci="" bus="">on pcib2
re0: <realtek 10="" 8101e="" 8102e="" 8102el="" 8103e="" pcie="" 100basetx="">port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
miibus0: <mii bus="">on re0
rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: [FILTER]
uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0xc880-0xc89f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">on uhci0
uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0xc800-0xc81f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">on uhci1
uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0xc480-0xc49f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">on uhci2
uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0xc400-0xc41f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">on uhci3
ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">on ehci0
pcib3: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci3: <acpi pci="" bus="">on pcib3
rl0: <realtek 10="" 8139="" 100basetx="">port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 1.0 on pci3
miibus1: <mii bus="">on rl0
rlphy1: <realtek internal="" media="" interface="">PHY 0 on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: [ITHREAD]
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich7="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
acpi_button0: <power button="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <parallel port="" bus="">on ppc0
plip0: <plip network="" interface="">on ppbus0
plip0: [ITHREAD]
lpt0: <printer>on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <parallel i="" o="">on ppbus0
atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <ps 2="" mouse="">irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
orm0: <isa option="" rom="">at iomem 0xc0000-0xcc7ff on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 152627MB <seagate st3160212as="" 3.aah="">at ata0-master UDMA100 SATA
ugen0.1: <intel>at usbus0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen1.1: <intel>at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
ugen2.1: <intel>at usbus2
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
ugen3.1: <intel>at usbus3
uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
ugen4.1: <intel>at usbus4
uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
pflog0: promiscuous mode enabled
rl0: link state changed to UPFatal trap 9: general protection fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x20:0xffffffff8076010e
stack pointer = 0x28:0xffffff802c05a810
frame pointer = 0x28:0xffffff802c05a850
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (irq16: rl0 uhci3)
Copyright 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p4 #0: Tue Sep 13 17:04:54 EDT 2011
root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Family = f Model = 4 Stepping = 1
Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x641d <sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr>AMD Features=0x20100800 <syscall,nx,lm>TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2015756288 (1922 MB)
ACPI APIC Table: <030811 APIC1634>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <version 2.0="">irqs 0-23 on motherboard
netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
wlan: mac acl policy registered
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e30, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548f0, 0) error 1
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cf0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d90, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <030811 RSDT1634> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7dd00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
vgapci0: <vga-compatible display="">port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <intel g41="" svga="" controller="">on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, hda="">at device 27.0 (no driver attached)
pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
pcib2: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
pci2: <acpi pci="" bus="">on pcib2
re0: <realtek 10="" 8101e="" 8102e="" 8102el="" 8103e="" pcie="" 100basetx="">port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
miibus0: <mii bus="">on re0
rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: [FILTER]
uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0xc880-0xc89f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">on uhci0
uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0xc800-0xc81f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">on uhci1
uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0xc480-0xc49f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">on uhci2
uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0xc400-0xc41f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">on uhci3
ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">on ehci0
pcib3: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci3: <acpi pci="" bus="">on pcib3
rl0: <realtek 10="" 8139="" 100basetx="">port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 1.0 on pci3
miibus1: <mii bus="">on rl0
rlphy1: <realtek internal="" media="" interface="">PHY 0 on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: [ITHREAD]
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich7="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
acpi_button0: <power button="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <parallel port="" bus="">on ppc0
plip0: <plip network="" interface="">on ppbus0
plip0: [ITHREAD]
lpt0: <printer>on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <parallel i="" o="">on ppbus0
atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <ps 2="" mouse="">irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
orm0: <isa option="" rom="">at iomem 0xc0000-0xcc7ff on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 152627MB <seagate st3160212as="" 3.aah="">at ata0-master UDMA100 SATA
ugen0.1: <intel>at usbus0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen1.1: <intel>at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
ugen2.1: <intel>at usbus2
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
ugen3.1: <intel>at usbus3
uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
ugen4.1: <intel>at usbus4
uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
pflog0: promiscuous mode enabled
rl0: link state changed to UP
pid 53302 (squid), uid 62: exited on signal 6</intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></seagate></cpu></cpu></generic></system></isa></ps></at></keyboard></parallel></printer></plip></parallel></parallel></at></power></serial></ata></ata></intel></isa></pci-isa></realtek></mii></realtek></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></rtl8201l></mii></realtek></acpi></acpi></acpi></acpi></multimedia,></intel></vga-compatible></acpi></acpi></acpi></acpi></software></version></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></seagate></cpu></cpu></generic></system></isa></ps></at></keyboard></parallel></printer></plip></parallel></parallel></at></power></serial></ata></ata></intel></isa></pci-isa></realtek></mii></realtek></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></rtl8201l></mii></realtek></acpi></acpi></acpi></acpi></multimedia,></intel></vga-compatible></acpi></acpi></acpi></acpi></software></version></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></seagate></cpu></cpu></generic></system></isa></ps></at></keyboard></parallel></printer></plip></parallel></parallel></at></power></serial></ata></ata></intel></isa></pci-isa></realtek></mii></realtek></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></rtl8201l></mii></realtek></acpi></acpi></acpi></acpi></multimedia,></intel></vga-compatible></acpi></acpi></acpi></acpi></software></version></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></seagate></cpu></cpu></generic></system></isa></ps></at></keyboard></parallel></printer></plip></parallel></parallel></at></power></serial></ata></ata></intel></isa></pci-isa></realtek></mii></realtek></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></rtl8201l></mii></realtek></acpi></acpi></acpi></acpi></multimedia,></intel></vga-compatible></acpi></acpi></acpi></acpi></software></version></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe> -
nyoba pfsense 2.0 release? amd64, install luscanya kok error ya? apa temen2 disini ngalamin seperti saya ya?
keteranganya seperti ini…..................?
Installation of lusca-cache FAILED!
Beginning package installation for lusca-cache...
Downloading package configuration file... done.
Saving updated package information... done.
Downloading lusca-cache and its dependencies...
Checking for package installation...
Downloading http://sites.google.com/site/chudyfernandez/8/amd64/squid_radius_auth-1.10.tbz ... could not download from there or http://ftp2.FreeBSD.org/pub/FreeBSD/ports/amd64/packages-8.1-release/All/squid_radius_auth-1.10.tbz.
of squid_radius_auth-1.10 failed!Installation aborted.Backing up libraries...
Removing package...
Starting package deletion for lusca-cache-r14850...done.
Starting package deletion for perl-5.10...done.
Starting package deletion for squid_radius_auth-1.10...done.
Starting package deletion for libwww-5.4.0_4...done.
Removing lusca-cache components...
Tabs items... done.
Menu items... done.
Services... done.
Loading package instructions...
Include file squid.inc could not be found for inclusion.
Deinstall commands...
Not executing custom deinstall hook because an include is missing.
Removing package instructions...done.
Auxiliary files... done.
Package XML... done.
Configuration... done.
Cleaning up... Failed to install package.Installation halted.
dicuba lagi hari ini, tadi pagi saya buat mesin baru x64 beserta luscanya juga ga ada masalah di versi release, mungkin waktu itu ada maintenance server kali yak>>>>>…...........