Postfix - antispam and relay package
-
Yeah, I will post some stats in a about a week. I will compare report files from our other filtering system and see what a rough % in reduction maybe. I can say that I have noticed a difference already just from last night when I enabled it. I am seeing a lot of RBLS blocks and invalide host address blocks. Normally this would get cought by our other filter, but not always for some reason.
For the most part, it seems to be working very well and I am excited for the Mailscanner package.
I have been playing around with the ACLs/Filter Maps section and was wondering if a manual blacklist block and whitelist allow will be added?
Thanks,
-
The ACLs allow you to block or permit ips, subjects, atachments and Also filter message body.
Take a look at samples below each field.
-
Ahhh yes, I am starting to understand how you are laying this out. This all makes sense now. I guess I have just been getting to use to check boxes and enable buttons way to much LOL.
Thanks again for the info.
Take Care
MDP
-
hello
marcelloc
I can confirm you this module can function as a relay host, thatis I work as an SMTP forwarder to an external mail Server using STARTTLS
I congratulate you for your great support for this great pauqete, Proxies and redirects mail, I'm new in this package I would like know if there is some configuration information, as a forwarder (SMTP) mail to an external Server "Outbound Relay Hosts"
Could anyone help me with the basic configuration to work as mail forwarder to an external server authentication through a little priest specified. It's a bit difficult to understand the configuration without documentation or configuration give some tics.
thanks for your collaboration
-
mauricioniñoavella,
The basic setup is already in this topic.
http://forum.pfsense.org/index.php/topic,40622.msg217539.html#msg217539All features in postfix forwarder package was include after many hours reading official postfix documentation.
Many features in this packages, has samples or direct links to postfix website, take a look.
Also you have the options to see the result of gui setup in View confi files tab.
Some docs about SASL say that are many implementations for it in postfix, now I'm trying to find one compatible with pfsense.
see considerations on enabling TLS
http://www.postfix.org/TLS_README.html -
marcelloc
I have a e-mail that seems to be getting blocked, which I think is a false positive. Here is the log I get back. Note that I removed the actual domain name and IP.
postfix/smtpd[32719]: NOQUEUE: reject: RCPT from mail.example.org[XXX.XXX.XXX.XXX]: 450 4.7.1 <ex02.example.local>: Helo command rejected: Host not found; from= someone@example.orgto= someone@mydomain.comproto=ESMTP helo= <ex02.example.local>I added this filter rule in the header to allow. This did not seem to work, but when I added a different rule to REJECT a different domain name, it worked.
/^From:.*@example.org/ OK
Any idea on this?
Thanks,
MDP</ex02.example.local>/someone@mydomain.com/someone@example.org</ex02.example.local>
-
The host that remote server announce on Helo smtp command Does not exist.
This is one of the header verification tests.
-
Hi all,
Postfix compilation on x64 now includes cyrus-SASL2 and TLS.
who need or want to test it, reinstall or remove/install postfix package.
No changes in gui for this option. Include all your SASL and/or TLS config in custom main.cf options
att,
Marcello Coutinho -
marcelloc,
I am getting a lot of these messages and I have seen a lot of them that are from domains and users I know. What can I do to stop these false positives. Here is the message I recieve minus real IP and domain names.
postfix/smtpd[61721]: NOQUEUE: reject: RCPT from mail.someonesdomain.com[xxx.xxx.xxx.xxx]: 450 4.7.1 <cnasrv.cna.local>: Helo command rejected: Host not found; from= someone@someonesdomain.comto= user@mydomain.comproto=ESMTP helo=<cnasrv.cna.local></cnasrv.cna.local>/user@mydomain.com/someone@someonesdomain.com</cnasrv.cna.local>
Here is my configuration. I have messed around trying to find out what is causing it and had no luck.
ACL Filter MIME:
/^name=[^>]*.(com|vbs|js|jse|exe|bat|cmd|vxd|scr|hlp|pif|shs|ini|dll)/ REJECT W do not allow files of type "$3" because of security concerns - "$2" caused the block.
/^Content-(Disposition|Type):\s+.+?(?:file)?name="?.+?.(386|ad[ept]|drv|em(ai)?l|ex[_e]|xms|{[\da-f]{8}(?:-[\da-f]{4}){3}-[\da-f]{12}})\b/ REJECT ".$2" file attachment types not allowed**ACL Filter CIDR:**My Internal Subnet xxx.xxx.xxx.xxx/24
Antispam:
Header Verification = strongZombie Blocker = Enabled with enforce
After greetins Test= all selected
Softbounce= enabled
RBL with = dnsbl.sorbs.net, bl.spamcop.net2, dnslb.local-5, cbl.abuseat.org, b.barracudacentral.org
RBL threshold = 1
SPF Check = Recomended setting
I have tried litteraly disabling everything and setting head check to basic to see if the messages would pass. I even added rules to the ACL filter list such as /^From:.*@someonesdomain.com OK
Is there something I can do? Do you have any suggestions?
Thanks,
MDP
-
As I told you last post, postfix is very judicious in header checks, so check your DNS server to see if this host announced by remote SMTP does exist or not.
You can also try to white-list this host in your local RBL and CIDR ACL.
I have many of these alerts too, but all of them are really spam or 'misconfigured' hosts.
-
marcelloc,
I am going to assume that they are misconfigured host because I know they are not spam emails.
I did state I added the /^From:.*@someonesdomain.com OK in the ACL's Filter in the header section. Does this not whitelist the e-mail or is it just whitelisting only one of the spam checks?
Also, if I add their domain address to the CIDR allow, wouldn't that allow their mail server to relay off ours according to the text I am reading at the bottom of that form field?
Thanks,
MDP
-
Sorry, I meant relay off the pfsense box. My mail server would not act as an open relay.
-
I am going to assume that they are misconfigured host because I know they are not spam emails.
Did you tested name resolution oh the remote host header info?
Also, if I add their domain address to the CIDR allow, wouldn't that allow their mail server to relay off ours according to the text I am reading at the bottom of that form field?
When using postscreen, the documentations says(correct me if I'm wrong) that this only prevents blocking.
When postscreen is disabled, any ip on CIDR allows relay on your server.Can you test this with any other external ip?
-
I have been using mxtoolbox.com for testing. One of the domains I am trying to figure out why it is getting blocked is clemansnelson.com
When I do a test on mxtoolbox.com for mail.clemansnelson.com I get the following.
220 CNASRV.CNA.local Microsoft ESMTP MAIL Service ready at Fri, 21 Oct 2011 12:59:31 -0400
OK - 24.123.130.226 resolves to mail.clemansnelson.com
Warning - Reverse DNS does not match SMTP Banner
0 seconds - Good on Connection time
Not an open relay.
5.335 seconds - Warning on Transaction timeThanks,
MDP
-
How would I go about disabling postscreen just to see if the mails start to come through. I thought I did disable once by simply unselecting the after greeting checks and disabling Zombie Blocker?
-
Can you see that there is a warning for this domain on your test?
I've made some tests here and mail.clemansnelson.com has a valid dns entry and it's related as SPF for clemansnelson.com.
check if your dns has same info and if postfix erros say that worng hostname is mail.clemansnelson.com or something else.
If you disable postscreen, the error will remain as it is done in header check.
-
Here is the message minus user email name and our domain name.
postfix/smtpd[10950]: NOQUEUE: reject: RCPT from mail.clemansnelson.com[24.123.130.226]: 450 4.7.1 <cnasrv.cna.local>: Helo command rejected: Host not found; from= someone@clemansnelson.comto= someone@mydomain.comproto=ESMTP helo= <cnasrv.cna.local>When you say my DNS, our you referring to my internal DNS or external WAN DNS from the firewall?
Thanks,
MDP</cnasrv.cna.local>/someone@mydomain.com/someone@clemansnelson.com</cnasrv.cna.local>
-
I have spotted about 6 other domains that I know are not spam that is getting the same message above. If I disable the Postfix forwarder and then do a temporary NAT and port forward of SMTP:25 to our internal mail server. The transparent spam filters we have will allow the message through and they do a lot of the same checks. I must have something misconfigured on postfix, or these host are not configured correctly. I am not willing to say something is wrong with the package because we are still getting a lot of good e-mails coming through.
Up above I posted my base config, can you see anything that would be causing the issue in that config?
Thanks,
MDP
-
postfix/smtpd[10950]: NOQUEUE: reject: RCPT from mail.clemansnelson.com[24.123.130.226]: 450 4.7.1 <cnasrv.cna.local>: Helo command rejected: Host not found; from= someone@clemansnelson.comto= someone@mydomain.comproto=ESMTP helo= <cnasrv.cna.local></cnasrv.cna.local>/someone@mydomain.com/someone@clemansnelson.com</cnasrv.cna.local>
The problem is this : helo=<cnasrv.cna.local></cnasrv.cna.local>
Helo host in smtp negotiaton must exist. If you allow any host in SMTP helo, you are opening your server for a lot of spam.
Many STMP admins 'foget' to configure their servers, it's normal.
In any way I suggest you to disable spam checks.
EDIT:
Note that any client behind a misconfigured server will receive this erros for many domains, so they can forward it to SMTP 'admins'
-
Well, as much as I hated to, I disabled the spam checks and saved, then disabled and saved and then renabled postfix and saved.
I am still getting the same messages?
Thanks,
MDP
