Snort stops working after snort update (newest 2.0 RELEASE)

eri--

Try again reinstalling.

Seems the code generated for the snort.sh was as always full of surprises :)

RonpfS

Removed snort, installed snort
this vanished

		 <minute>3</minute>
			<hour>0</hour>
			<mday>*/1</mday>
			<month>*</month>
			<wday>*</wday>
			<who>root</who>
			<command></command>/usr/bin/nice -n20 /usr/local/bin/php -f /usr/local/pkg/snort/snort_check_for_rule_updates.php >> /tmp/snort_update.log 
		 <minute>*/15</minute>
			<hour>*</hour>
			<mday>*</mday>
			<month>*</month>
			<wday>*</wday>
			<who>root</who>
			<command></command>/usr/bin/nice -n20 /usr/local/sbin/expiretable -t 10800 snort2c

I save in the Global settings it showed up again like this

		 <minute>*/15</minute>
			<hour>*</hour>
			<mday>*</mday>
			<month>*</month>
			<wday>*</wday>
			<who>root</who>
			<command></command>/usr/bin/nice -n20 /usr/local/sbin/expiretable -t 10800 snort2c 
		 <minute>3</minute>
			<hour>0</hour>
			<mday>*/1</mday>
			<month>*</month>
			<wday>*</wday>
			<who>root</who>
			<command></command>/usr/bin/nice -n20 /usr/local/bin/php -f /usr/local/pkg/snort/snort_check_for_rule_updates.php >> /tmp/snort_update.log

I ran Update and snort started, trigger Alerts and Blocks IP ;o) ;D
maybe if I ran Update first, the crontab entry might have reappeared.

However, the Snort Interface shows a GREEN arrow, RED Wan,
the If settings show a start button.
But snort is running as root in System Activity
Snort is showed running under Services. Stopping snort under Services requires a refresh to update the status to not running
You also have to refresh Dashboard to see the updated snort status. Starting snort in Dashboard failed

I started Snort under Services: Snort work ok.

During all that time, the Snort Interface ALLWAYS shows a GREEN arrow, RED Wan

The midnight update went fine and snort reloaded without problem. ::)

Cino

that seem to do it! thanks again.

I trying to figure out why i'm not seeing it up. You didn't make any changes to the page(and snort_interfaces_edit.php) but they are not reporting status correctly.

I'm wondering because root is running snort is it failing the few checks i see not idk.

Cino

@RonpfS Every time you reinstall snort, save the global settings page for it to re-create the cron job.. This has been normal practice since snort was fixed a few months back.

I'm having the same issue with the snort_interface.php showing the status of snort.

serialdie

Any body seen that snort is using more mem than before?

Using ac-std with just 3 categories enable…. my mem goes to 58% where before it was only like 28% any ideas?

bdwyer

I too now have the issue with Snort not being seen as running, although it is.

RonpfS

I just changed the WAN ip and snort failed with

2011-11-10 22:50:24	Daemon.Error	x.x.x.x	snort[41456]: FATAL ERROR: /usr/local/etc/snort/snort_18203_pppoe0/snort.conf(356) Invalid configuration line: s
2011-11-10 22:50:24	Daemon.Info	x.x.x.x	SnortStartup[6772]: Snort HARD START For 18203_pppoe0...

Start manual is ok …

eri--

Fixed the display on the GUI and snort reload on ip change.

Now who will send me beer?!

Of course you need to reinstall.

Cino

Notice work I me an other user have found an issue with the interface.php page http://forum.pfsense.org/index.php/topic,42955.msg221944.html#msg221944

When i try to start from the interface page, i get the below error, the file location is doubled

snort[4101]: FATAL ERROR: Unable to open rules file "/usr/local/etc/snort/snort_39737_em3//usr/local/etc/snort/snort_39737_em3/rules/emerging-attack_response.rules": No such file or directory.

if i reboot the box or do a manually rule update, snort starts fine

Also, did the new binaries compile over night? I look under http://files.pfsense.org/packages/8/All/ and the date stamp didn't change. As i said in a previous post, my box isn't downloading binaries anymore and i think it has to do with the future pbi that is coming when 2.1 is on freebsd 9.

p.s you like pale ale's

eri--

Post your snort.conf since nothing has changed there!
Apart that PBI installs iirc snort 2.9.1

Cino

@ermal:

Post your snort.conf since nothing has changed there!
Apart that PBI installs iirc snort 2.9.1

Dont know if this helps: When I stop snort via the interface page, it deletes /usr/local/etc/snort/snort_39737_em3 folder. When i try to start it, it doesn't create it.. So thats why snort wont start. BUT if I do a manually update of the rules, it creates the folder and snort is able to start again

eri--

Fixed.
Try after 15 minutes.

Cino

@ermal:

Fixed.
Try after 15 minutes.

looking good man! i'll do some more testing later today. also, since i never tested this for you before; barnyard2 is reporting data to my windows mysql server. I did have to manually copy the barnyard2 file from file.pfsense.org to get it on my box but i don't know if that's because its not in the package install or the issue I'm having with my box not pulling down binaries.

I don't think the new snort binary has been complied yet… I dont them on files.pfsense.org... also for the pbi, they look to be 2.9.1 but i'll have to wait for a freebsd9 snapshot before i can test

RonpfS

Removed and installed Services: Snort 2.9.1 pkg v. 2.0

I did see 2.9.0.5.tar during the install ??

Now the status is ok in the GUI.
I changed the WAN IP and snort restarted fine ::)

Thank you

eri--

I will need some beer together with pfSense.org guys to continue improve this more :)

Hope people put some effort into donation as they do in the reporting of issues ;)

dhatz

Ermal, you are right of course.

Considering that according to recent blog post pfsense has recently surpassed 100k active installs, there should be a better way to fund projects than posting in the Bounty forum and waiting a couple of weeks for others to join in, since apparently a very small fraction of pfsense users reads these forums regularly.

I'm thinking of a funding platform like http://www.indiegogo.com/ (just the concept) coupled with a way for people to vote up/down on features (e.g. feature.astaro.com)

Cino

@RonpfS 2.9.0.5 is the correct file for install for 2.0 installs. I have 2.1 development code installed on my box for testing…

@Ermal I sent some money this morning... Bug Scott for a case or 2 :-)

eri--

Thanks Cino, much appreciated.

RonpfS

I forgot to do a save after the last install :-[ No entry was expiring !!!

[quote author=Cino link=topic=41533.msg221876#msg221876 date=1320973760]
@RonpfS Every time you reinstall snort, save the global settings page for it to re-create the cron job.. This has been normal practice since snort was fixed a few months back.

This could be emphasized with a BIG MESSAGE
in the System: Package Manager Installer or Services: Snort: Updates window.

Why not 'automatic global settings save' when you click the Update Rules Button??

serialdie

Any body having issues with memory when snort is running?