Getty repeating too quickly on port
-
I'm getting this error since this morning. And I'm using 2.0 released. I have no clue on what's going on with the log below.
Oct 3 09:41:19 init: getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs
Oct 3 09:41:19 init: getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs
Oct 3 09:41:19 getty[51200]: tcsetattr /dev/ttyv0: Operation not supported
Oct 3 09:41:19 getty[51200]: tcsetattr /dev/ttyv0: Operation not supported
Oct 3 09:41:19 getty[51200]: getty: unknown gettytab entry 'Pc'
Oct 3 09:41:19 getty[51200]: getty: unknown gettytab entry 'Pc'
Oct 3 09:41:19 getty[51200]: getty: unknown gettytab entry 'Pc'
Oct 3 09:41:19 getty[51200]: getty: unknown gettytab entry 'Pc'
Oct 3 09:41:19 getty[51200]: getty: unknown gettytab entry 'default'
Oct 3 09:41:19 getty[51200]: getty: unknown gettytab entry 'default'
Oct 3 09:41:19 getty[51008]: tcsetattr /dev/ttyv0: Operation not supported
Oct 3 09:41:19 getty[51008]: tcsetattr /dev/ttyv0: Operation not supportedAnyone can help?
-
Guys, anyone know this problem? I saw this error happened during year 2007 released. However, it happen on my pfsense 2.0 now.
-
You might check /etc/gettytab and compare it to a known good version. We've seen that file become corrupt before and cause such errors.
https://raw.github.com/bsdperimeter/pfsense/master/etc/gettytab
-
Hi i have the same problem.
Running a diff from the github ver to the one on my box shows:
So can i just safely replace the one on my box with the github version?
diff gettytab /etc/gettytab
61,225c61,65
< :np:nd#1:cd#1:sp#600:
< f|std.1200|1200-baud:
< :np:fd#1:sp#1200:
< 6|std.2400|2400-baud:
< :np:sp#2400:
< 7|std.4800|4800-baud:
< :np:sp#4800:
< 2|std.9600|9600-baud:
< :np:sp#9600:
< g|std.19200|19200-baud:
< :np:sp#19200:
< std.38400|38400-baud:
< :np:sp#38400:
< std.57600|57600-baud:
< :np:sp#57600:
< std.115200|115200-baud:
< :np:sp#115200:
< std.230400|230400-baud:
< :np:sp#230400:
<
< #
< # Entry specifying explicit device settings. See termios(4) and
< # /usr/include/termios.h, too. The entry forces the tty into
< # CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
< #
< # cflags: CLOCAL | HUPCL | CREAD | CS8
< # oflags: OPOST | ONLCR | OXTABS
< # iflags: IXOFF | IXON | ICRNL | IGNPAR
< # lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
< #
< # The0' flags don't have input enabled. The1' flags don't echo.
< # (Echoing is done inside getty itself.)
< #
< local.9600|CLOCAL tty @ 9600 Bd:
< :c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:
< :o0#0x00000007:o1#0x00000002:o2#0x00000007:
< :i0#0x00000704:i1#0x00000000:i2#0x00000704:
< :l0#0x000005cf:l1#0x00000000:l2#0x000005cf:
< :sp#9600:
<
< #
< # Dial in rotary tables, speed selection via 'break'
< #
< 0|d300|Dial-300:
< :nx=d1200:cd#2:sp#300:
< d1200|Dial-1200:
< :nx=d150:fd#1:sp#1200:
< d150|Dial-150:
< :nx=d110:lm@:tc=150-baud:
< d110|Dial-110:
< :nx=d300:tc=300-baud:
<
< #
< # Fast dialup terminals, 2400/1200/300 rotary (can start either way)
< #
< D2400|d2400|Fast-Dial-2400:
< :nx=D1200:tc=2400-baud:
< 3|D1200|Fast-Dial-1200:
< :nx=D300:tc=1200-baud:
< 5|D300|Fast-Dial-300:
< :nx=D2400:tc=300-baud:
<
< #
< #telebit (19200)
< #
< t19200:
< :nx=t2400:tc=19200-baud:
< t2400:
< :nx=t1200:tc=2400-baud:
< t1200:
< :nx=t19200:tc=1200-baud:
<
< #
< #telebit (9600)
< #
< t9600:
< :nx=t2400a:tc=9600-baud:
< t2400a:
< :nx=t1200a:tc=2400-baud:
< t1200a:
< :nx=t9600:tc=1200-baud:
<
< #
< # Odd special case terminals
< #
< -|tty33|asr33|Pity the poor user of this beast:
< :tc=110-baud:
<
< 4|Console|Console Decwriter II:
< :nd@:cd@:rw:tc=300-baud:
<
< e|Console-1200|Console Decwriter III:
< :fd@:nd@:cd@:rw:tc=1200-baud:
<
< i|Interdata console:
< :uc:sp#0:
<
< l|lsi chess terminal:
< :sp#300:
<
< X|Xwindow|X window system:
< :fd@:nd@:cd@:rw:sp#9600:
<
< P|Pc|Pc console:
< :ht:np:sp#115200:al=root:
<
< bootupcli:
< tc=std.9600:
< :ht:np:sp#115200:al=root:
<
< #
< # Wierdo special case for fast crt's with hardcopy devices
< #
< 8|T9600|CRT with hardcopy:
< :nx=T300:tc=9600-baud:
< 9|T300|CRT with hardcopy (300):
< :nx=T9600:tc=300-baud:
<
< #
< # Plugboard, and misc other terminals
< #
< plug-9600|Plugboard-9600:
< :pf#1:tc=9600-baud:
< p|P9600|Plugboard-9600-rotary:
< :pf#1:nx=P300:tc=9600-baud:
< q|P300|Plugboard-300:
< :pf#1:nx=P1200:tc=300-baud:
< r|P1200|Plugboard-1200:
< :pf#1:nx=P9600:tc=1200-baud:
<
< #
< # XXXX Port selector
< #
< s|DSW|Port Selector:
< :ps:sp#2400:
<
< #
< # Auto-baud speed detect entry for Micom 600.
< # Special code in getty will switch this out
< # to one of the NNN-baud entries.
< #
< A|Auto-baud:
<
sp#2400:f0#040:
<
< #
< # autologin - automatically log in as root
< #
<
< autologin|al.9600:
< ::tc=std.9600:
<
< #
< # Entries for 3-wire serial terminals. These don't supply carrier, so
< # clocal needs to be set, and crtscts needs to be unset.
< #
< 3wire.9600|9600-3wire:
< :np:nc:sp#9600:
< 3wire.38400|38400-3wire:
< :np:nc:sp#38400:
< 3wire.57600|57600-3wire:
< :np:nc:sp#57600:
< 3wire.115200|115200-3wire:
< :np:nc:sp#115200:
< 3wire.230400|230400-3wire:
< :np:nc:sp#230400:
–- -
Just replace it, yeah. That diff is just basically saying yours is empty (or some blank lines)
-
Just replaced it and the error disappeard.
Thanks jimpBtw file wasnt empty so probably some blank lines.
