PfBlocker

marcelloc

You need at least one rule created to pfBlocker work on selected interface.

mentalhemroids

Running 2.0-RELEASE (i386) built on Tue Sep 13 17:00:00 EDT 2011 Intel(R) Xeon(TM) CPU 3.06GHz w/ 3gb RAM.

Just loaded and reloaded pfBlocker and I'm finding that if I set outbound to be blocked to spamlist I can still get to India or Russia located sites. Any idea what I might need to do. I have my firewall maximum table entries at 500000.

Thanks.

tommyboy180

@mentalhemroids:

Running 2.0-RELEASE (i386) built on Tue Sep 13 17:00:00 EDT 2011 Intel(R) Xeon(TM) CPU 3.06GHz w/ 3gb RAM.

Just loaded and reloaded pfBlocker and I'm finding that if I set outbound to be blocked to spamlist I can still get to India or Russia located sites. Any idea what I might need to do. I have my firewall maximum table entries at 500000.

Thanks.

What are the sites?

mentalhemroids

@tommyboy180

194.226.127.34 - http://eng.kremlin.ru
203.199.104.241 - http://www.airindia.in

and http://www.prodisney.ru/index.php?page=clones.php

marcelloc

@mentalhemroids:

Running 2.0-RELEASE (i386) built on Tue Sep 13 17:00:00 EDT 2011 Intel(R) Xeon(TM) CPU 3.06GHz w/ 3gb RAM.

Just loaded and reloaded pfBlocker and I'm finding that if I set outbound to be blocked to spamlist I can still get to India or Russia located sites. Any idea what I might need to do. I have my firewall maximum table entries at 500000.

Thanks.

Are you blocking countries India and Russia or applying a spamlist from ipblocklist?

Enable pfblocker widget. there you can see alias package count hit.

mentalhemroids

@marcelloc

I have the spamlist all selected; I was assuming that if the country is in there the entire country would be blocked. Am I wrong?

I will take a look at the widget today.

Thanks!

marcelloc

The default way to block spam is inbound as you do not want them to send email to you.

You can also change action to alias only and create a block rule only on inbound smtp connections.

sekular

If i enable the top spammers alias included in pfblocker on outbound those hostnames you specified are not accessible.

marcelloc

@sekular:

If i enable the top spammers alias included in pfblocker on outbound those hostnames you specified are not accessible.

Top spammers is just a shortcut for countries that send many spams.

The best way to block this is changing action to alias only and create an inbound rule denying smtp connections.

mentalhemroids

I chose alias only and set outbound and inbound block; I'm still getting to the sites. The one interesting thing is that before I chose the option block outbound this morning I had it set to block inbound yesterday before I went home and when I loaded the widget this morning it had some packets listed. It doesn't have anything listed right now… I may need to reboot the server; I'll try that later on today.

marcelloc

There is no need to reboot, all rules are applied when you save config.

try this:

select only one country
apply
got to diagnostics -> table
select alias you applied country
check if the websites ip is in any of network CIDRS listed

Just to be sure you understand how rules work.

inbound rules -> applied on source side of wan rules
outbound rules -> applied on destination side of lan rules
Floating rules -> apply rules to block pfsense to reach something

mentalhemroids

I don't know what is happening, but I just put a specific rule in place of the pfBlocker and the Indian site is still not getting blocked; could it be due to squid?
Thanks!

firewall_reject_india.jpg_thumb

marcelloc

@mentalhemroids:

I don't know what is happening, but I just put a specific rule in place of the pfBlocker and the Indian site is still not getting blocked; could it be due to squid?
Thanks!

Finally an answer. It's squid. :)

Create the same rule on floating rules.

Squid goes to internet using localhost, so lan rules will not match any squid access.

mentalhemroids

Okay, so question… do I need to have both WAN and LAN selected in the floating rule? I had just one and things seemed to still go through; with both the sites were blocked. I guess it could be that it's cached on my pc here, but I am getting things blocked on another pc with just LAN selected.

Thanks for your help marcelloc!

firewall_reject_india1.jpg_thumb

marcelloc

Well, it's time for first release.

pfblocker 1.0 is out. No changes from last beta version.

tommyboy180

Congratulations! Excellent work marcelloc!

mentalhemroids

Another question… am I supposed to see numbers in the packets column? Mine are blank... Thanks.

marcelloc

@mentalhemroids:

Another question… am I supposed to see numbers in the packets column? Mine are blank... Thanks.

Numbers will appear only when you have applied rules to aliases pfBlocker creates.

Also post pfsense version and hardware used.

mentalhemroids

@marcelloc:

Numbers will appear only when you have applied rules to aliases pfBlocker creates.

Also post pfsense version and hardware used.

I have the status showing up and running ver 1.0 pfBlocker on pfSense 2.0 x86; I don't know what else to tell you.

firewall_reject_pfblocker.jpg_thumb

RonpfS

@mentalhemroids

I guess the PfBlocker Widget counters are built by scanning the Firewall rule descriptions.

When you use pfBlocker Aliasname in Firewall rules, you have to start the description with pfBlocker Aliasname for the widget to keep track.

in your case "pfBlockerAsia bla bla lba'

however, if you description end with 'rule' it would be recognized as auto generated and removed by pfblocker on save.

@marcelloc:

I've changed important note for better understanding.

Aliasname something rule will be removed by package.