2 WAN – 1 LAN
-
hi,
i am new to pf-sense & got problem with 2 WAN + 1 LAN pfsense setup. the interface are as follows
WAN–-PPPOE Connection
OPT1---DHCP Connection
LAN---Static(192.168.1.1)
the problem is that the WAN(PPPOE) interface is shown disable and the internet is accessed through OPT1 Interface which i have to keep as backup connection. however when i ping through Diagnostics>>Ping i get reply from both Interfaces(WAN & OPT1)
plz anyone tell me who to enable the WAN interface under above mention conditions. -
-
i have gone through pfsense documentation and there is mention of solution for my problem. the WAN is already enable in Interfaces>>WAN & i am also getting ping from Diagnostcs>>Ping for WAN however The WAN Interface is shown disable Status:Dashboard.
-
What kind of topology you are having? can you draw a picture or give information quite detailed(but sanitized ofcourse)
-
topology as file attached
-
What rules you have on LAN, WAN and OPT1 interfaces
-
check the monitor IP of the gateway you are using for WAN interface. Or disable monitor IP for GW on WAN.