Freeradius with rlm_ldap?

[Nachtfalke]

hmm, did you change the thread/posts ?
I thought you had a solution for that…

Did you try that ?
http://wiki.freeradius.org/Rlm_ldap

[Nachtfalke]

Perhaps we can download the rlm_ldap module and compile it
https://github.com/alandekok/freeradius-server/tree/master/src/modules

and after that copy the files to

/usr/local/etc/raddb/modules/

[aranel]

@Nachtfalke:

Perhaps we can download the rlm_ldap module and compile it
https://github.com/alandekok/freeradius-server/tree/master/src/modules

and after that copy the files to

/usr/local/etc/raddb/modules/

Emm, but how i can download and compile external module?

[Nachtfalke]

You can click on "Downloads" and then download all the modules.
But in every folder there is a "makefile" so I think you have to compile the files first and that is my problem:
pfsense itself does not have developement tools installed (because you don't need them) and I do not have any other freeBSD 8.x environment where I could compile these files and then just copy them on pfsense.

perhaps someone else can do this for us?!

[Nachtfalke]

Hi,

I played around with freeRADIUS and the rlm_ldap module.

First I downloaded the freeRADIUS 1.1.8 source from here:
ftp://ftp.freeradius.org/pub/radius/freeradius-1.1.8.tar.gz

Then I downloaded the PC-BSD8.2 (amd64) from here:
http://www.pcbsd.org/

Then I installed PC-BSD8.2 on VMware Workstation and installed freeradius on the machine:

./configure
make
make install

This worked for me. All additional modules were installed in

/usr/local/lib/

They all start with "rlm_"

There is the rlm_ldap module, too and freeRADIUS is starting when enabling ldap in radius.conf.
After this I thought I just need to copy this module from PC-BSD to pfsense. pfsense stores the freeRADIUS modules is /usr/local/lib/ ,too.
But it didn't work.

I attached you the rlm_ldap module I copiled with PC-BSD and I attached you alle the modules I compiled with PC-BSD.
Perhaps someone can help us to find out why this module isn't working. Not sure if these modules are independent from i386 and amd64 but I tried with pfsense amd64 and PC-BSD8.2 amd64

All freeRADIUS modules:
http://www.file-upload.net/download-3912854/rlm_ALLE.tar.html

rlm_ldap.tar.txt

[aranel]

Can you upload all rlm_* modules to mediafire/rapidshare/email?

[Nachtfalke]

http://www.mediafire.com/?ouydb2ekk8ozqqu

[aranel]

Thanks.

[Nachtfalke]

I searched for this problem and found something in the FAQ.
It is related to mySQL but it seems that the problem is the same as for LDAP.

http://wiki.freeradius.org/FAQ#It+says+%22Could+not+link+…+file+not+found%22%2C+what+do+I+do%3F

Perhaps we have to modify the    $PATH    variable in pfsense.
But I really don't know.

[Nachtfalke]

Hi,

I got the solution and I got it running with the rlm_ldap module on my pfsense 2.0 final amd64:

This are the additional files you need:
rlm_ldap:
http://www.mediafire.com/?966eei7qg46avvu
I uploaded this file via GUI "Diagnostics -> Command Promt" to pfsense. The rlm_ldap.tar is now locates in /tmp.
Then I did this:

cd /tmp
tar -xf rlm_ldap.tar
cd /usr/local/lib
mv /tmp/usr/local/lib/rlm_* .

After doing a ldd on rlm_ldap.so I got the solution. Some libraries are missing.

ldd /usr/local/lib/rlm_ldap.so

will give you the solution.

I uploaded libldap.tar to my pfsense:
http://www.mediafire.com/?nclfti7ndz8yr6o

Then I did this:

cd /tmp
tar -xf libldap.tar
cd /usr/local/lib
mv /tmp/libldap* .

After doing a ldd on rlm_ldap.so again I got the last missing libraries:
I uploaded liblber.tar to my pfsense:
http://www.mediafire.com/?08hpaghl26lky0k

Then I did this:

cd /tmp
tar -xf liblber.tar
cd /usr/local/lib
mv /tmp/liblber* .

To make the changes in radius.conf permanent I edited the following file:

/usr/local/pkg/freeradius.inc

I uncommented four lines in these two sections:

authorize {
(.....)
        ldap
(.....)

authenticate {
(.....)
        Auth-Type LDAP {
                ldap
        }
(.....)

This is the LDAP output after starting freeRADIUS with radiusd -X

Module: Loaded LDAP
 ldap: server = "ldap.your.domain"
 ldap: port = 389
 ldap: net_timeout = 1
 ldap: timeout = 4
 ldap: timelimit = 3
 ldap: identity = ""
 ldap: tls_mode = no
 ldap: start_tls = no
 ldap: tls_cacertfile = "(null)"
 ldap: tls_cacertdir = "(null)"
 ldap: tls_certfile = "(null)"
 ldap: tls_keyfile = "(null)"
 ldap: tls_randfile = "(null)"
 ldap: tls_require_cert = "allow"
 ldap: password = ""
 ldap: basedn = "o=My Org,c=UA"
 ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
 ldap: base_filter = "(objectclass=radiusprofile)"
 ldap: default_profile = "(null)"
 ldap: profile_attribute = "(null)"
 ldap: password_header = "(null)"
 ldap: password_attribute = "(null)"
 ldap: access_attr = "dialupAccess"
 ldap: groupname_attribute = "cn"
 ldap: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
 ldap: groupmembership_attribute = "(null)"
 ldap: dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap"
 ldap: ldap_debug = 0
 ldap: ldap_connections_number = 5
 ldap: compare_check_items = no
 ldap: access_attr_used_for_allow = yes
 ldap: do_xlat = yes
 ldap: set_auth_type = yes
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
conns: 0x8012e1880
Module: Instantiated ldap (ldap)

Please let me know if this works for you.
And if yes please add here what you need to change to make freeRADIUS work with your LDAP.
Perhaps we are able to implement the changes you are doing by hand in the radiusd.conf to the GUI.

[aranel]

After added liblber, "ldd /usr/local/lib/rlm_ldap.so" still gives:

ldd: /usr/local/lib/rlm_ldap.so: not a dynamic executable

And after all of this, radiusd -X gives:

radiusd.conf[256] Failed to link to module 'rlm_exec': file not found

ls /usr/local/lib/rlm_exec*
/usr/local/lib/rlm_exec-1.1.8.la /usr/local/lib/rlm_exec.a        /usr/local/lib/rlm_exec.so
/usr/local/lib/rlm_exec-1.1.8.so /usr/local/lib/rlm_exec.la

Strangely.

[Nachtfalke]

Hi,

please go to /usr/local/lib and delete all "rlm_*" files.
Then deinstall freeradius package from the GUI and the reinstall the freeradius package from the GUI.

Then use then just add the three files from my last post:
rlm_ldap.tar
libldap.tar
liblber.tar

And pay attention. I used the "move" command "mv" NOT the "copy" "cp".

If you use the "ls -la" command in /user/local/lub than you can see that there are several links on the files. Cannot explain that exact.
The extracted files you downloaded from my .tar files have these links. But if you copy them they lose these link. That's the reason why I used "mv" instead of "cp".

Please try that again and post back.
If it does not work I will do a complete clean install of pfsense this afternoon/evening and try again.
I just think that you or I mixed up some libraries and so it is working for me but not for you. But we know that it will work with this minor fixes ;o)

–--- edit -----

I did a complete and fresh reinstallation of pfsense and then did the steps I described above and freeRADIUS is starting.

----- edit 2 -----

I did a test with like it is described in the tutorial you posted and I got this output:

radtest username "password" localhost 1 testing123

[2.0-RELEASE][admin@pfSense.localdomain]/root(2): radtest username "password" localhost 1 testing123
Sending Access-Request of id 1 to 127.0.0.1 port 1812
        User-Name = "username"
        User-Password = "password"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 1
^C
[2.0-RELEASE][admin@pfSense.localdomain]/root(3):

/usr/local/sbin/radiusd  -X -A

rad_recv: Access-Request packet from host 127.0.0.1:57602, id=1, length=60
        User-Name = "username"
        User-Password = "password"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 1

Logging to syslog gave me this output - of course I do not have any ldap server:

Dec 1 16:53:21 	radiusd[31420]: rlm_ldap: (re)connection attempt failed
Dec 1 16:53:21 	radiusd[31420]: rlm_ldap: (re)connection attempt failed
Dec 1 16:53:21 	radiusd[31420]: rlm_ldap: bind to ldap.your.domain:389 failed: Can't contact LDAP server
Dec 1 16:53:21 	radiusd[31420]: rlm_ldap: bind to ldap.your.domain:389 failed: Can't contact LDAP server
Dec 1 16:53:00 	radiusd[31420]: Ready to process requests.

[Nachtfalke]

@aranel

Is LDAP working for you now ?

It would be greate to know if it is working now with the compiled module. I do not have any LDAP here to test with.

Thanks for your feedback!