Schedule conflict with captive portal?
-
Hi all,
I got a situation with my pfsense box. I have did some search in the forum and got no clues. I don't know it is a bug or I did something not correctly.
The settings of my pfsense box is very simple. I use pfsense for NAT and use captive portal for gateway authorisation. Everything works fine before I add some scheduling rules to block some IP for certain times.
Does anyone else got this situation also?
Thanks
Bill -
when you disable the rules that have schedules with them, does the problem go away? If so then it is a schedule conflict.
-
when you disable the rules that have schedules with them, does the problem go away? If so then it is a schedule conflict.
Thank you for suggestion. I have not trying to diables the schedule rules. I did a reinstall and have not configure the schedule rules this time.
Actually I have another two pfsense boxes. all of them run fine with captive portal and without schedule rules. And I have tried twice with captive portal and scheduling and all going wrong.
-
Can you be more specific on what is wrong?
-
Hi, I have the same problem.
As soon as you define a schedule, the captive portal stops working: everyone bypasses it.
Even if you don't use the schedule at all..You have to remove the schedule and reboot pfSense to get the captive portal working again.
I found out that this is an old problem:
http://sadsoftware.blogspot.com/2008/09/pfsense-captive-portal-with-firewall.htmlI'm using pfSense 1.2.3 on an Alix board, btw.
-
In 1.2.3 its not possible only 2.0 allows you to use schedules with CP.