Errors on Dell PowerEdge r510
-
On the display of the server, I see this error:
vm_thread_new: kstack allocation failedI hope somebody can find an answer for this problem. Now I have to reboot the server every day!
-
if it were me, i'd try to get a backup of the current config using the gui, clean install pfsense, import the config and see if that resolves it.
but, you could allways wait around till someone comes along with a more elegant solution ;)
-
How much RAM is actually being detected (watch the boot logs or check dmesg)?
It looks like it's exhausing all your RAM and swap space which I would only expect to see if in situations where you only had maybe ~64MB of RAM or less actually getting used.
Could be a bad stick of RAM but that would usually fail in even more spectacular ways.
-
This is the output for dmesg:
$ dmesg Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE-p4 #1: Tue Sep 13 17:28:11 EDT 2011 root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (2000.08-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106a5 Family = 6 Model = 1a Stepping = 5 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 3127521280 (2982 MB) ACPI APIC Table: <dell pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 16 cpu1 (AP): APIC ID: 18 ioapic1: Changing APIC ID to 1 ioapic0 <version 2.0="">irqs 0-23 on motherboard ioapic1 <version 2.0="">irqs 32-55 on motherboard netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (wpi_fw, 0xc0988330, 0) error 1 ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0789370, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0789410, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07894b0, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. acpi0: <dell pe_sc3="">on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <acpi cpu="">on acpi0 cpu1: <acpi cpu="">on acpi0 acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus="">on pcib0 pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0 pci1: <acpi pci="" bus="">on pcib1 bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xce000000-0xcfffffff irq 36 at device 0.0 on pci1 miibus0: <mii bus="">on bce0 brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: [ITHREAD] bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI|MFW); MFW (NCSI 2.0.3) bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd0000000-0xd1ffffff irq 48 at device 0.1 on pci1 miibus1: <mii bus="">on bce1 brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce1: [ITHREAD] bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI|MFW); MFW (NCSI 2.0.3) pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0 pci2: <acpi pci="" bus="">on pcib2 mfi0: <dell 6="" perc="">port 0xfc00-0xfcff mem 0xdf180000-0xdf1bffff,0xdf1c0000-0xdf1fffff irq 32 at device 0.0 on pci2 mfi0: Megaraid SAS driver Ver 3.00 mfi0: 4255 (376514919s/0x0020/info) - Shutdown command received from host mfi0: 4256 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) mfi0: 4257 (boot + 3s/0x0020/info) - Firmware version 1.22.02-0612 mfi0: 4258 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) mfi0: 4259 (boot + 3s/0x0020/info) - Firmware version 1.22.02-0612 mfi0: 4260 (boot + 23s/0x0008/info) - Battery Present mfi0: 4261 (boot + 23s/0x0020/info) - Controller hardware revision ID (0x0) mfi0: 4262 (boot + 23s/0x0020/info) - Package version 6.2.0-0013 mfi0: 4263 (boot + 23s/0x0020/info) - Board Revision mfi0: 4264 (boot + 37s/0x0002/info) - Inserted: PD 00(e0xff/s0) mfi0: 4265 (boot + 37s/0x0002/info) - Inserted: PD 00(e0xff/s0) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=1221000000000000,0000000000000000 mfi0: 4266 (boot + 37s/0x0002/info) - Inserted: PD 01(e0xff/s1) mfi0: 4267 (boot + 37s/0x0002/info) - Inserted: PD 01(e0xff/s1) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=1221000001000000,0000000000000000 mfi0: [ITHREAD] pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0 pci3: <acpi pci="" bus="">on pcib3 bce2: <broadcom netxtreme="" ii="" bcm5709="" 1000base-t="" (c0)="">mem 0xd2000000-0xd3ffffff irq 38 at device 0.0 on pci3 miibus2: <mii bus="">on bce2 brgphy2: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce2: [ITHREAD] bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI) bce3: <broadcom netxtreme="" ii="" bcm5709="" 1000base-t="" (c0)="">mem 0xd4000000-0xd5ffffff irq 45 at device 0.1 on pci3 miibus3: <mii bus="">on bce3 brgphy3: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce3: [ITHREAD] bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI) pcib4: <acpi pci-pci="" bridge="">at device 9.0 on pci0 pci4: <acpi pci="" bus="">on pcib4 bce4: <broadcom netxtreme="" ii="" bcm5709="" 1000base-t="" (c0)="">mem 0xd6000000-0xd7ffffff irq 40 at device 0.0 on pci4 miibus4: <mii bus="">on bce4 brgphy4: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus4 brgphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce4: [ITHREAD] bce4: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI) bce5: <broadcom netxtreme="" ii="" bcm5709="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 50 at device 0.1 on pci4 miibus5: <mii bus="">on bce5 brgphy5: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus5 brgphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce5: [ITHREAD] bce5: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI) pcib5: <acpi pci-pci="" bridge="">at device 10.0 on pci0 pci5: <acpi pci="" bus="">on pcib5 bce6: <broadcom netxtreme="" ii="" bcm5709="" 1000base-t="" (c0)="">mem 0xda000000-0xdbffffff irq 41 at device 0.0 on pci5 miibus6: <mii bus="">on bce6 brgphy6: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus6 brgphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce6: [ITHREAD] bce6: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI) bce7: <broadcom netxtreme="" ii="" bcm5709="" 1000base-t="" (c0)="">mem 0xdc000000-0xddffffff irq 39 at device 0.1 on pci5 miibus7: <mii bus="">on bce7 brgphy7: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus7 brgphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce7: [ITHREAD] bce7: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI) pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached) pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached) pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached) uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xec40-0xec5f irq 17 at device 26.0 on pci0 uhci0: [ITHREAD] usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0 uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xec60-0xec7f irq 18 at device 26.1 on pci0 uhci1: [ITHREAD] usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1 ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xdf0ff800-0xdf0ffbff irq 19 at device 26.7 on pci0 ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0 uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xec80-0xec9f irq 21 at device 29.0 on pci0 uhci2: [ITHREAD] usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2 uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xeca0-0xecbf irq 20 at device 29.1 on pci0 uhci3: [ITHREAD] usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3 uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xecc0-0xecdf irq 21 at device 29.2 on pci0 uhci4: [ITHREAD] usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4 uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xece0-0xecff irq 20 at device 29.3 on pci0 uhci5: [ITHREAD] usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5 ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xdf0ffc00-0xdf0fffff irq 21 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1 pcib6: <acpi pci-pci="" bridge="">at device 30.0 on pci0 pci6: <acpi pci="" bus="">on pcib6 vgapci0: <vga-compatible display="">mem 0xcd800000-0xcdffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci6 isab0: <pci-isa bridge="">at device 31.0 on pci0 isa0: <isa bus="">on isab0 atapci0: <intel ich10="" sata300="" controller="">port 0xe8e0-0xe8e7,0xe8d0-0xe8d3,0xe8e8-0xe8ef,0xe8d4-0xe8d7,0xec00-0xec0f,0xec10-0xec1f irq 23 at device 31.2 on pci0 atapci0: [ITHREAD] ata2: <ata 0="" channel="">on atapci0 ata2: [ITHREAD] ata3: <ata 1="" channel="">on atapci0 ata3: [ITHREAD] atapci1: <intel ich10="" sata300="" controller="">port 0xe8f0-0xe8f7,0xe8d8-0xe8db,0xe8f8-0xe8ff,0xe8dc-0xe8df,0xec20-0xec2f,0xec30-0xec3f irq 22 at device 31.5 on pci0 atapci1: [ITHREAD] ata4: <ata 0="" channel="">on atapci1 ata4: [ITHREAD] ata5: <ata 1="" channel="">on atapci1 ata5: [ITHREAD] atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] pmtimer0 on isa0 orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xec000-0xeffff pnpid ORM0000 on isa0 sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: parallel port not found. est0: <enhanced speedstep="" frequency="" control="">on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr f device_attach: est0 attach returned 6 p4tcc0: <cpu frequency="" thermal="" control="">on cpu0 est1: <enhanced speedstep="" frequency="" control="">on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr f device_attach: est1 attach returned 6 p4tcc1: <cpu frequency="" thermal="" control="">on cpu1 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <intel>at usbus0 uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <intel>at usbus1 uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1 ugen2.1: <intel>at usbus2 uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2 ugen3.1: <intel>at usbus3 uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3 ugen4.1: <intel>at usbus4 uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4 ugen5.1: <intel>at usbus5 uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5 ugen6.1: <intel>at usbus6 uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6 ugen7.1: <intel>at usbus7 uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered bce0: bce_pulse(): Bootcode lost the driver pulse! (bc_state = 0x0003600E) bce1: bce_pulse(): Bootcode lost the driver pulse! (bc_state = 0x0003600E) bce2: bce_pulse(): Bootcode lost the driver pulse! (bc_state = 0x0003E00E) bce3: bce_pulse(): Bootcode lost the driver pulse! (bc_state = 0x0003E00E) bce4: bce_pulse(): Bootcode lost the driver pulse! (bc_state = 0x0003E00E) bce5: bce_pulse(): Bootcode lost the driver pulse! (bc_state = 0x0003E00E) bce6: bce_pulse(): Bootcode lost the driver pulse! (bc_state = 0x0003E00E) bce7: bce_pulse(): Bootcode lost the driver pulse! (bc_state = 0x0003E00E) uhub2: 4 ports with 4 removable, self powered uhub7: 4 ports with 4 removable, self powered acd0: DVDR <tsstcorp dvd+="" -rw="" ts-l633c="" d250="">at ata4-master UDMA100 SATA 1.5Gb/s mfi0: 4268 (376514988s/0x0020/info) - Time established as 12/06/11 19:29:48; (38 seconds since power on) mfi0: 4269 (376515038s/0x0008/info) - Battery temperature is normal mfi0: 4270 (376515038s/0x0008/info) - Current capacity of the battery is above threshold mfi0: 4271 (376515038s/0x0008/info) - Battery relearn will start in 4 days mfid0: <mfi logical="" disk="">on mfi0 mfid0: 152064MB (311427072 sectors) RAID volume '' is optimal SMP: AP CPU #1 Launched! Root mount waiting for: usbus7 usbus2 ugen2.2: <vendor 0x0424="">at usbus2 uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2 uhub8: 4 ports with 4 removable, self powered Root mount waiting for: usbus2 ugen2.3: <alps electric="">at usbus2 uhub9: <alps 3="" 9="" electric="" hub="" in="" apple="" usb="" keyboard,="" class="" 0,="" rev="" 1.10="" 2.10,="" addr="">on usbus2 ugen3.2: <avocent>at usbus3 ukbd0: <keyboard>on usbus3 kbd2 at ukbd0 ums0: <mouse>on usbus3 ums0: 3 buttons and [Z] coordinates ID=0 Root mount waiting for: usbus2 uhub9: 3 ports with 2 removable, bus powered ugen2.4: <alps electric="">at usbus2 ukbd1: <alps 0="" 4="" electric="" apple="" usb="" keyboard,="" class="" 0,="" rev="" 1.10="" 1.03,="" addr="">on usbus2 kbd3 at ukbd1 ugen2.5: <mitsumi>at usbus2 ums1: <mitsumi 0="" 5="" apple="" usb="" mouse,="" class="" 0,="" rev="" 1.00="" 5.05,="" addr="">on usbus2 ums1: 1 buttons and [XY] coordinates ID=0 Trying to mount root from ufs:/dev/mfid0s1a pflog0: promiscuous mode enabled bce5: link state changed to UP bce6: link state changed to UP bce4: link state changed to UP bce2: link state changed to UP mfi0: 4272 (376515103s/0x0008/info) - Battery started charging bce7: link state changed to DOWN arp: 172.16.1.101 moved from 00:17:f2:c6:f0:56 to 00:1f:f3:43:36:6b on bce2 arp: 172.16.1.175 moved from f8:1e:df:f7:a5:43 to 00:24:36:9f:4a:d0 on bce2 mfi0: 4273 (376518613s/0x0008/info) - Battery charge complete</mitsumi></mitsumi></alps></alps></mouse></keyboard></avocent></alps></alps></vendor></vendor></mfi></tsstcorp></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></dell></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></dell></software></version></version></dell ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>There is 4GB of ram. After re-installing the Lightsquid package, the server runs about 4 days without a need for reboot.
-
You could have something in your squid config set to consume large amounts of RAM. You didn't mention packages before, there could be tons of things in packages that would chew through all your RAM and swap if they aren't set correctly.
-
These are my settings for Squid proxy:
-
At this moment, Memory usage is 45%.
-
The output from the following commands at the shell would also help:
top -SHLet it run for a 30+ seconds, then copy and paste the full screen of output including the memory usage breakdown
And:
ps uxawww -
At this moment, SSH to the server gets a timeout. This is the output using the command prompt in the web interface.
$ ps uxawww USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND root 11 200.0 0.0 0 16 ?? RL Tue08PM 16605:07.14 [idle] root 61477 0.1 0.5 53596 16216 ?? S Tue08PM 0:01.22 /usr/local/bin/php root 0 0.0 0.0 0 48 ?? DLs Tue08PM 0:00.35 [kernel] root 1 0.0 0.0 1888 304 ?? ILs Tue08PM 0:00.05 /sbin/init -- root 2 0.0 0.0 0 8 ?? DL Tue08PM 0:08.56 [g_event] root 3 0.0 0.0 0 8 ?? DL Tue08PM 0:19.88 [g_up] root 4 0.0 0.0 0 8 ?? DL Tue08PM 0:22.35 [g_down] root 5 0.0 0.0 0 8 ?? DL Tue08PM 0:00.00 [crypto] root 6 0.0 0.0 0 8 ?? DL Tue08PM 0:00.00 [crypto returns] root 7 0.0 0.0 0 8 ?? DL Tue08PM 0:00.00 [sctp_iterator] root 8 0.0 0.0 0 8 ?? DL Tue08PM 0:13.08 [pfpurge] root 9 0.0 0.0 0 8 ?? DL Tue08PM 0:00.00 [xpt_thrd] root 10 0.0 0.0 0 8 ?? DL Tue08PM 0:00.00 [audit] root 12 0.0 0.0 0 232 ?? WL Tue08PM 59:36.44 [intr] root 13 0.0 0.0 0 16 ?? DL Tue08PM 0:00.26 [ng_queue] root 14 0.0 0.0 0 8 ?? DL Tue08PM 2:37.17 [yarrow] root 15 0.0 0.0 0 256 ?? DL Tue08PM 0:16.12 [usb] root 16 0.0 0.0 0 8 ?? DL Tue08PM 0:00.64 [pagedaemon] root 17 0.0 0.0 0 8 ?? DL Tue08PM 0:00.00 [vmdaemon] root 18 0.0 0.0 0 8 ?? DL Tue08PM 0:00.00 [pagezero] root 19 0.0 0.0 0 8 ?? DL Tue08PM 0:00.29 [idlepoll] root 20 0.0 0.0 0 8 ?? DL Tue08PM 0:00.91 [bufdaemon] root 21 0.0 0.0 0 8 ?? DL Tue08PM 0:01.23 [vnlru] root 22 0.0 0.0 0 8 ?? DL Tue08PM 6:27.69 [syncer] root 23 0.0 0.0 0 8 ?? DL Tue08PM 0:01.12 [softdepflush] root 39 0.0 0.0 0 8 ?? DL Tue08PM 0:00.25 [md0] root 253 0.0 0.0 3408 1072 ?? INs Tue08PM 0:00.01 /usr/local/sbin/check_reload_status root 255 0.0 0.0 3408 936 ?? IN Tue08PM 0:00.00 check_reload_status: Monitoring daemon of check_reload_status root 270 0.0 0.0 1888 388 ?? Is Tue08PM 0:00.01 /sbin/devd root 2158 0.0 0.0 3316 952 ?? Is Tue08PM 0:00.22 /usr/local/bin/minicron 240 /var/run/ping_hosts.pid /usr/local/bin/ping_hosts.sh root 2639 0.0 0.0 3316 952 ?? Is Tue08PM 0:00.02 /usr/local/bin/minicron 3600 /var/run/expire_accounts.pid /etc/rc.expireaccounts root 3102 0.0 0.0 3316 952 ?? Is Tue08PM 0:00.00 /usr/local/bin/minicron 86400 /var/run/update_alias_url_data.pid /etc/rc.update_alias_url_data root 10235 0.0 0.1 5272 2544 ?? Is Tue08PM 0:00.00 /usr/sbin/sshd root 10480 0.0 0.0 3316 1232 ?? Is Tue08PM 0:00.08 dhclient: bce0 [priv] (dhclient) root 12217 0.0 0.0 4556 1144 ?? Is Tue08PM 0:00.01 /usr/local/sbin/sshlockout_pf 15 _dhcp 20334 0.0 0.0 3316 1356 ?? Ss Tue08PM 0:00.18 dhclient: bce0 (dhclient) root 21632 0.0 0.0 1564 508 ?? IN 4:49PM 0:00.00 sleep 60 root 23177 0.0 0.1 7296 3440 ?? Is Tue08PM 0:00.00 /usr/local/sbin/squid -D root 23348 0.0 0.0 1564 508 ?? S 4:49PM 0:00.00 sleep 55 proxy 23868 0.0 31.7 1000576 988376 ?? S Tue08PM 32:11.57 (squid) -D (squid) root 24023 0.0 0.0 3456 1096 ?? R 4:49PM 0:00.00 ps uxawww proxy 24208 0.0 0.0 1564 632 ?? I Tue08PM 0:00.00 (unlinkd) (unlinkd) root 28396 0.0 0.1 4944 1900 ?? Ss Tue08PM 0:06.31 /usr/sbin/syslogd -c -c -l /var/dhcpd/var/run/log -f /var/etc/syslog.conf root 34317 0.0 0.0 3316 1252 ?? SNs Tue08PM 2:30.65 /usr/local/sbin/apinger -c /var/etc/apinger.conf root 35411 0.0 0.0 3316 1280 ?? Ss Tue08PM 0:00.21 ntpd: [priv] (ntpd) dhcpd 36906 0.0 0.2 8436 5644 ?? Ss 4:48PM 0:00.00 /usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf bce3 bce4 bce2 root 37122 0.0 0.1 9528 3464 ?? Is Tue08PM 0:00.02 /usr/local/sbin/mpd4 -b -d /var/etc/pptp-vpn -p /var/run/pptp-vpn.pid -s pptps pptps root 41359 0.0 0.0 3436 1308 ?? Is Tue08PM 0:00.00 /usr/sbin/inetd -wW -R 0 -a 127.0.0.1 /var/etc/inetd.conf root 44202 0.0 0.0 4496 1292 ?? IN 4:48PM 0:00.00 /usr/local/bin/rrdtool - root 54604 0.0 0.2 52572 7588 ?? Is Tue08PM 0:00.04 /usr/local/bin/php root 56990 0.0 0.5 54620 15456 ?? I Tue08PM 0:00.19 /usr/local/bin/php root 57033 0.0 0.2 52572 7672 ?? I Tue08PM 0:00.00 /usr/local/bin/php root 59166 0.0 0.1 6588 3492 ?? SN 4:48PM 0:00.06 /usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf root 60911 0.0 0.2 52572 7628 ?? Is Tue08PM 0:00.04 /usr/local/bin/php root 61244 0.0 0.0 3656 1244 ?? IN 4:48PM 0:00.02 /bin/sh /var/db/rrd/updaterrd.sh root 61275 0.0 0.6 54620 19748 ?? I Tue08PM 0:01.92 /usr/local/bin/php root 61690 0.0 0.0 3404 1264 ?? Is Tue08PM 0:00.56 /usr/sbin/cron -s root 1604 0.0 0.0 3656 1196 v0- S Tue08PM 0:04.06 /bin/sh /usr/local/etc/rc.d/proxy_monitor.sh start root 11998 0.0 0.0 3684 1428 v0 Is Tue08PM 0:00.01 login [pam] (login) root 12479 0.0 0.0 3656 1208 v0 I Tue08PM 0:00.00 -sh (sh) root 13627 0.0 0.0 3656 1208 v0 I+ Tue08PM 0:00.00 /bin/sh /etc/rc.initial root 29015 0.0 0.1 5912 2924 v0- S Tue08PM 0:04.21 /usr/sbin/tcpdump -s 256 -v -l -n -e -ttt -i pflog0 root 29055 0.0 0.0 3316 836 v0- S Tue08PM 0:02.23 logger -t pf -p local0.info _ntp 33003 0.0 0.0 3316 1260 v0- S Tue08PM 0:00.44 ntpd: ntp engine (ntpd) -
Just run that periodically and keep an eye on it. Looks like squid is using 1GB so far, it may keep going up, or something else may spring up using lots of RAM.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.