No internet access
-
In my pf-sense box two LAN cards are attach.one is acting as LAN and other is acting as wan.
On wan dhcp is enabled. the wan is taking INTERNET from router and my pc is connected with lan of pfsense.
The problem is that : Let wan port is connected with router and lan is connected with my pc .when I on pfsense box from power button then after completely start up, pfsense will give no internet to my pc even there is no access with pfsense web conf page. pfsense give ip,subnet,default gateway,dns at this condition to my pc but there is no access to any think.
if let pfsense box is shutdown and i remove the wire connected with wan port and then i on the pfsense box.After completely start(giving ip,subnet,default gateway,dns to my pc) if i plug wire of internet in wan port then internet will acess and also the the pfsense page will also access.
why INTERNET is not accessing if INTERNET wire is already plug in wan port? -
why INTERNET is not accessing if INTERNET wire is already plug in wan port?
Probably because you have misconfigured your pfSense box in some way.
What is the IP address and network mask of the pfSense WAN interface?
What is the IP address and network mask of the pfSense LAN interface?
What is the IP address and network mask of the PC? -
Have you ran the start wizard, where you can set gateway properly?
-
IP address and network mask of the pfSense WAN interface:
ip:192.168.1.100
subnet:255.255.255.0
gateway:192.168.1.1
dns:203.99.163.240
IP address and network mask of the pfSense LAN interface:
Gateway of pfesense:192.168.1.2
ip range:192.168.1.10 to 192.168.1.254
subnet:255.255.255.0
IP address and network mask of the PC:
ip:192.168.1.10
subnet:255.255.255.0
gateway:192.168.1.2 -
Unless you are using this as a transparent firewall you need to have you WAN and LAN interfaces in different subnets. E.g.
WAN: 192.168.1.100/24
LAN: 192.168.2.1/24Steve