Upgrading firmware GUI errors
-
I've noticed with the last few versions I've had to try to upload the firmware more then once.
I'll click browse, find the file, and as soon as I click to upload the firmware I instantly get a 'page cannot be displayed' error. Sometimes I have to try 2-3 times. I'm using IE, which is probably what you're going to blame :P
-
Sorry, can't duplicate the problem here.
-
It's weird, because it's not just on one computer. It's all my computers (running XP Pro), including a computer with a fresh install. I haven't tried upgrading the firmware from a linux machine yet. Next time there is an update I'll give it a try.
-
I have been getting this error on IE also…. if i hit back and resubmit, it seems to work. I tried with Firefox and and I get the following sometimes:
-
Thats old stuff from the upload progress bar. I've just removed the old code.
-
I've been getting the same behavior. If I log in via SSH before hitting 'Upgrade Firmware', the session locks up for several seconds. The terminal becomes responsive around the same time the browser comes back with a 'timed out' error.
Interestingly enough, if I check /var/log/system.log, I see the following message with a timestamp choresponding to every upgrade attempt:
Jan 15 01:38:12 stubbs kernel: vr0: watchdog timeoutThe system is a Via EPIA-5000 board, using the onboard NIC as the LAN interface and an Atheros MiniPCI A/B/G card as the WAN.
-
Well, I dont kow how your configuration is, but in my case I use the webgui with https and a different port than 443. So I've noticed that every time I try to install a firmware update using the url: https://pfbox:4430 it brings me an error of "page not found".
But if I change the configuration to http on port 80, it works fine, so maybe it's a problem with the links on the script.
In fact I've been getting this kind of error since B1, I'm actually using B2-BV5, and I did forgot to mention this on the forums :-[ .
I hope this may help you, while the code it's fixed…
-
I am having the same problem going from 1.0 Release to 1.0.1. I have changed the http port back to 80 and the "The page cannot be displayed" error goes away but when I hit Upgrade it just sits there and the IE status bar slowly starts going from left to right but the upgrade never starts.
-
Use firefox.