Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    LAN change footshooting regression

    Scheduled Pinned Locked Moved 2.0-RC Snapshot Feedback and Problems - RETIRED
    1 Posts 1 Posters 1.3k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dotdashD Offline
      dotdash
      last edited by

      It seems changing the LAN address is harder in 2/0 than it was in 1.2.3.
      Possibly the procedure has changed from 1.2.3 to 2.0 and I'm doing it wrong.
      Previously, if I changed the LAN address to a different subnet, I would get a warning to change the dhcp scope before applying. This allowed a fairly smooth change from a LAN connected machine- you could change the dhcp scope, apply changes, then get a new IP on the correct subnet from dhcp.
      In 2.0, it reminds me to change the DHCP scope after applying. If I don't apply, and go to the DHCP server, it does not allow me to change the range to the new subnet.
      The result is that if you're doing this from the LAN, you need to static the machine on the new subnet, then adjust the DHCP scope.

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.