Squid can't start
-
After update squid to 2.7.9 pkg v.4.3, my squid services stop and cannot start.
When I click start, it's still stop.
System logs show
Dec 30 21:10:43 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 21:10:43 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 21:10:43 php: : SQUID is installed but not started. Not installing "filter" rules.
can help me?
-
Check cache.log or try to start squid with squid -NsXY to get a better debug.
-
There should be more in the log than that referring to squid if it didn't start properly.
That log just means that it isn't running, there should be something before that in the log that says why
-
Dec 30 14:22:50 syslogd: kernel boot file is /boot/kernel/kernel Dec 30 14:22:50 kernel: Copyright (c) 1992-2010 The FreeBSD Project. Dec 30 14:22:50 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Dec 30 14:22:50 kernel: The Regents of the University of California. All rights reserved. Dec 30 14:22:50 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Dec 30 14:22:50 kernel: FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 17:53:00 EST 2011 Dec 30 14:22:50 kernel: root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 i386 Dec 30 14:22:50 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Dec 30 14:22:50 kernel: CPU: Intel Pentium III (1000.40-MHz 686-class CPU) Dec 30 14:22:50 kernel: Origin = "GenuineIntel" Id = 0x68a Family = 6 Model = 8 Stepping = 10 Dec 30 14:22:50 kernel: Features=0x383fbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse>Dec 30 14:22:50 kernel: real memory = 268435456 (256 MB) Dec 30 14:22:50 kernel: avail memory = 238845952 (227 MB) Dec 30 14:22:50 kernel: ACPI APIC Table: <acer m33vt=""> Dec 30 14:22:50 kernel: ioapic0 <version 1.1=""> irqs 0-23 on motherboard Dec 30 14:22:50 kernel: netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling Dec 30 14:22:50 kernel: wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. Dec 30 14:22:50 kernel: wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. Dec 30 14:22:50 kernel: module_register_init: MOD_LOAD (wpi_fw, 0xc0988300, 0) error 1 Dec 30 14:22:50 kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. Dec 30 14:22:50 kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Dec 30 14:22:50 kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0789340, 0) error 1 Dec 30 14:22:50 kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. Dec 30 14:22:50 kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Dec 30 14:22:50 kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07893e0, 0) error 1 Dec 30 14:22:50 kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. Dec 30 14:22:50 kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Dec 30 14:22:50 kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0789480, 0) error 1 Dec 30 14:22:50 kernel: wlan: mac acl policy registered Dec 30 14:22:50 kernel: kbd1 at kbdmux0 Dec 30 14:22:50 kernel: cryptosoft0: <software crypto=""> on motherboard Dec 30 14:22:50 kernel: padlock0: No ACE support. Dec 30 14:22:50 kernel: acpi0: <acer m33vt=""> on motherboard Dec 30 14:22:50 kernel: acpi0: [ITHREAD] Dec 30 14:22:50 kernel: acpi0: Power Button (fixed) Dec 30 14:22:50 kernel: acpi0: reservation of 0, a0000 (3) failed Dec 30 14:22:50 kernel: acpi0: reservation of 100000, e00000 (3) failed Dec 30 14:22:50 kernel: acpi0: reservation of 1000000, f000000 (3) failed Dec 30 14:22:50 kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Dec 30 14:22:50 kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0 Dec 30 14:22:50 kernel: cpu0: <acpi cpu=""> on acpi0 Dec 30 14:22:50 kernel: pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0 Dec 30 14:22:50 kernel: pci0: <acpi pci="" bus=""> on pcib0 Dec 30 14:22:50 kernel: agp0: <via 8653="" (pro266t)="" host="" to="" pci="" bridge=""> on hostb0 Dec 30 14:22:50 kernel: agp0: aperture size is 64M Dec 30 14:22:50 kernel: pcib1: <acpi pci-pci="" bridge=""> at device 1.0 on pci0 Dec 30 14:22:50 kernel: pci1: <acpi pci="" bus=""> on pcib1 Dec 30 14:22:50 kernel: vgapci0: <vga-compatible display=""> port 0x7000-0x70ff mem 0x81000000-0x81ffffff,0x80100000-0x80100fff irq 17 at device 0.0 on pci1 Dec 30 14:22:50 kernel: rl0: <realtek 10="" 8139="" 100basetx=""> port 0x8000-0x80ff mem 0x82100000-0x821000ff irq 16 at device 8.0 on pci0 Dec 30 14:22:50 kernel: miibus0: <mii bus=""> on rl0 Dec 30 14:22:50 kernel: rlphy0: <realtek internal="" media="" interface=""> PHY 0 on miibus0 Dec 30 14:22:50 kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Dec 30 14:22:50 kernel: rl0: [ITHREAD] Dec 30 14:22:50 kernel: fxp0: <intel 100="" 82559="" pro="" ethernet=""> port 0x8400-0x843f mem 0x82101000-0x82101fff,0x82200000-0x822fffff irq 17 at device 9.0 on pci0 Dec 30 14:22:50 kernel: miibus1: <mii bus=""> on fxp0 Dec 30 14:22:50 kernel: inphy0: <i82555 10="" 100="" media="" interface=""> PHY 1 on miibus1 Dec 30 14:22:50 kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Dec 30 14:22:50 kernel: fxp0: [ITHREAD] Dec 30 14:22:50 kernel: fxp1: <intel 100="" 82559="" pro="" ethernet=""> port 0x8480-0x84bf mem 0x82102000-0x82102fff,0x82400000-0x824fffff irq 18 at device 10.0 on pci0 Dec 30 14:22:50 kernel: miibus2: <mii bus=""> on fxp1 Dec 30 14:22:50 kernel: inphy1: <i82555 10="" 100="" media="" interface=""> PHY 1 on miibus2 Dec 30 14:22:50 kernel: inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Dec 30 14:22:50 kernel: fxp1: [ITHREAD] Dec 30 14:22:50 kernel: ahc0: <adaptec aic7899="" ultra160="" scsi="" adapter=""> port 0x8800-0x88ff mem 0x82103000-0x82103fff irq 18 at device 13.0 on pci0 Dec 30 14:22:50 kernel: ahc0: [ITHREAD] Dec 30 14:22:50 kernel: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Dec 30 14:22:50 kernel: ahc1: <adaptec aic7899="" ultra160="" scsi="" adapter=""> port 0x8c00-0x8cff mem 0x82104000-0x82104fff irq 16 at device 13.1 on pci0 Dec 30 14:22:50 kernel: ahc1: [ITHREAD] Dec 30 14:22:50 kernel: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Dec 30 14:22:50 kernel: fxp2: <intel 100="" 82550="" pro="" ethernet=""> port 0x9080-0x90bf mem 0x82900000-0x82900fff,0x82920000-0x8293ffff irq 19 at device 14.0 on pci0 Dec 30 14:22:50 kernel: miibus3: <mii bus=""> on fxp2 Dec 30 14:22:50 kernel: inphy2: <i82555 10="" 100="" media="" interface=""> PHY 1 on miibus3 Dec 30 14:22:50 kernel: inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Dec 30 14:22:50 kernel: fxp2: [ITHREAD] Dec 30 14:22:50 kernel: isab0: <pci-isa bridge=""> at device 17.0 on pci0 Dec 30 14:22:50 kernel: isa0: <isa bus=""> on isab0 Dec 30 14:22:50 kernel: atapci0: <via 8233="" udma100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x9440-0x944f at device 17.1 on pci0 Dec 30 14:22:50 kernel: ata0: <ata 0="" channel=""> on atapci0 Dec 30 14:22:50 kernel: ata0: [ITHREAD] Dec 30 14:22:50 kernel: ata1: <ata 1="" channel=""> on atapci0 Dec 30 14:22:50 kernel: ata1: [ITHREAD] Dec 30 14:22:50 kernel: uhci0: <via 83c572="" usb="" controller=""> port 0x9400-0x941f irq 16 at device 17.2 on pci0 Dec 30 14:22:50 kernel: uhci0: [ITHREAD] Dec 30 14:22:50 kernel: usbus0: <via 83c572="" usb="" controller=""> on uhci0 Dec 30 14:22:50 kernel: acpi_button0: <power button=""> on acpi0 Dec 30 14:22:50 kernel: atkbdc0: <keyboard controller="" (i8042)=""> port 0x60,0x64 irq 1 on acpi0 Dec 30 14:22:50 kernel: atkbd0: <at keyboard=""> irq 1 on atkbdc0 Dec 30 14:22:50 kernel: kbd0 at atkbd0 Dec 30 14:22:50 kernel: atkbd0: [GIANT-LOCKED] Dec 30 14:22:50 kernel: atkbd0: [ITHREAD] Dec 30 14:22:50 kernel: atrtc0: <at realtime="" clock=""> port 0x70-0x75 irq 8 on acpi0 Dec 30 14:22:50 kernel: fdc0: <floppy drive="" controller=""> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 Dec 30 14:22:50 kernel: fdc0: [FILTER] Dec 30 14:22:50 kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Dec 30 14:22:50 kernel: ppc0: <parallel port=""> port 0x378-0x37f irq 7 on acpi0 Dec 30 14:22:50 kernel: ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode Dec 30 14:22:50 kernel: ppc0: [ITHREAD] Dec 30 14:22:50 kernel: ppbus0: <parallel port="" bus=""> on ppc0 Dec 30 14:22:50 kernel: plip0: <plip network="" interface=""> on ppbus0 Dec 30 14:22:50 kernel: plip0: [ITHREAD] Dec 30 14:22:50 kernel: lpt0: <printer> on ppbus0 Dec 30 14:22:50 kernel: lpt0: [ITHREAD] Dec 30 14:22:50 kernel: lpt0: Interrupt-driven port Dec 30 14:22:50 kernel: ppi0: <parallel i="" o=""> on ppbus0 Dec 30 14:22:50 kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Dec 30 14:22:50 kernel: uart0: [FILTER] Dec 30 14:22:50 kernel: uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 Dec 30 14:22:50 kernel: uart1: [FILTER] Dec 30 14:22:50 kernel: pmtimer0 on isa0 Dec 30 14:22:50 kernel: orm0: <isa option="" roms=""> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0 Dec 30 14:22:50 kernel: sc0: <system console=""> at flags 0x100 on isa0 Dec 30 14:22:50 kernel: sc0: VGA <16 virtual consoles, flags=0x300> Dec 30 14:22:50 kernel: vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Dec 30 14:22:50 kernel: Timecounter "TSC" frequency 1000396498 Hz quality 800 Dec 30 14:22:50 kernel: Timecounters tick every 1.000 msec Dec 30 14:22:50 kernel: IPsec: Initialized Security Association Processing. Dec 30 14:22:50 kernel: usbus0: 12Mbps Full Speed USB v1.0 Dec 30 14:22:50 kernel: acd0: CDROM <atapi-cd rom-drive-52max="" ver="" 52ye=""> at ata0-master UDMA33 Dec 30 14:22:50 kernel: ugen0.1: <via> at usbus0 Dec 30 14:22:50 kernel: uhub0: <via 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus0 Dec 30 14:22:50 kernel: uhub0: 2 ports with 2 removable, self powered Dec 30 14:22:50 kernel: da0 at ahc1 bus 0 scbus1 target 0 lun 0 Dec 30 14:22:50 kernel: da0: <seagate st318406lw="" 010a=""> Fixed Direct Access SCSI-3 device Dec 30 14:22:50 kernel: da0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Dec 30 14:22:50 kernel: da0: Command Queueing enabled Dec 30 14:22:50 kernel: da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) Dec 30 14:22:50 kernel: Trying to mount root from ufs:/dev/da0s1a Dec 30 14:22:50 kernel: pflog0: promiscuous mode enabled Dec 30 14:22:51 sshd[23866]: Server listening on :: port 2199. Dec 30 14:22:51 sshd[23866]: Server listening on 0.0.0.0 port 2199. Dec 30 14:22:51 sshlockout[24015]: sshlockout/webConfigurator v3.0 starting up Dec 30 14:22:52 check_reload_status: Linkup starting rl0 Dec 30 14:22:52 kernel: rl0: link state changed to UP Dec 30 14:22:52 apinger: Starting Alarm Pinger, apinger(26546) Dec 30 14:22:54 php: : ROUTING: setting default route to 192.168.1.254 Dec 30 14:22:55 dhcpd: Internet Systems Consortium DHCP Server 4.2.3 Dec 30 14:22:55 dhcpd: Copyright 2004-2011 Internet Systems Consortium. Dec 30 14:22:55 dhcpd: All rights reserved. Dec 30 14:22:55 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Dec 30 14:22:55 check_reload_status: Updating all dyndns Dec 30 14:22:55 dnsmasq[40120]: started, version 2.55 cachesize 10000 Dec 30 14:22:55 dnsmasq[40120]: compile time options: IPv6 GNU-getopt no-DBus I18N DHCP TFTP Dec 30 14:22:55 dnsmasq[40120]: using nameserver 192.168.3.206#53 for domain kelantanlibrary.gov.my Dec 30 14:22:55 dnsmasq[40120]: reading /etc/resolv.conf Dec 30 14:22:55 dnsmasq[40120]: using nameserver 202.188.1.5#53 Dec 30 14:22:55 dnsmasq[40120]: using nameserver 202.188.0.133#53 Dec 30 14:22:55 dnsmasq[40120]: ignoring nameserver 127.0.0.1 - local interface Dec 30 14:22:55 dnsmasq[40120]: ignoring nameserver 127.0.0.1 - local interface Dec 30 14:22:55 dnsmasq[40120]: using nameserver 192.168.3.206#53 for domain kelantanlibrary.gov.my Dec 30 14:22:55 dnsmasq[40120]: read /etc/hosts - 9 addresses Dec 30 14:22:57 php: : OpenNTPD is starting up. Dec 30 14:22:57 php: : Something wrong in the PPTPd configuration. Preventing starting the daemon because issues would arise. Dec 30 14:22:57 kernel: ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding enabled, default to accept, logging disabled Dec 30 14:22:57 kernel: load_dn_sched dn_sched FIFO loaded Dec 30 14:22:57 kernel: load_dn_sched dn_sched QFQ loaded Dec 30 14:22:57 kernel: load_dn_sched dn_sched RR loaded Dec 30 14:22:57 kernel: load_dn_sched dn_sched WF2Q+ loaded Dec 30 14:22:57 kernel: load_dn_sched dn_sched PRIO loaded Dec 30 14:23:00 check_reload_status: Restarting ipsec tunnels Dec 30 14:23:02 php: : Creating rrd update script Dec 30 14:23:02 apinger: ALARM: GW_OPT2(192.168.3.1) *** down *** Dec 30 14:23:12 check_reload_status: Reloading filter Dec 30 14:23:17 check_reload_status: Syncing firewall Dec 30 14:23:21 php: : Beginning package installation for squid. Dec 30 14:23:25 check_reload_status: Syncing firewall Dec 30 14:23:29 apinger: alarm canceled: GW_OPT2(192.168.3.1) *** down *** Dec 30 14:23:39 check_reload_status: Reloading filter Dec 30 14:23:52 apinger: Error while feeding rrdtool: Broken pipe Dec 30 14:23:52 apinger: /usr/local/bin/rrdtool respawning too fast, waiting 300s. Dec 30 14:24:25 check_reload_status: Syncing firewall Dec 30 14:24:26 php: : Stopping any running proxy monitors Dec 30 14:24:27 php: : Starting Squid Dec 30 14:24:27 php: : Starting a proxy monitor script Dec 30 14:24:27 squid[40759]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:24:27 php: : Starting Squid Dec 30 14:24:27 squid[42883]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:24:27 php: : The command '/usr/local/sbin/squid -D' returned exit code '1', the output was 'FATAL: Bungled squid.conf line 16: logfile_rotate Squid Cache (Version 2.7.STABLE9): Terminated abnormally.' Dec 30 14:24:32 Squid_Alarm[44560]: Squid has exited. Reconfiguring filter. Dec 30 14:24:32 Squid_Alarm[44840]: Attempting restart... Dec 30 14:24:32 squid[45996]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:24:38 php: : Starting Squid Dec 30 14:24:38 squid[48452]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:24:38 php: : The command '/usr/local/sbin/squid -D' returned exit code '1', the output was 'FATAL: Bungled squid.conf line 16: logfile_rotate Squid Cache (Version 2.7.STABLE9): Terminated abnormally.' Dec 30 14:24:50 check_reload_status: Syncing firewall Dec 30 14:25:03 check_reload_status: Syncing firewall Dec 30 14:25:05 check_reload_status: Syncing firewall Dec 30 14:25:13 php: : Beginning package installation for Lightsquid. Dec 30 14:25:17 check_reload_status: Syncing firewall Dec 30 14:25:24 kernel: < Dec 30 14:25:25 kernel: 118> Downloading http://files.pfsense.org/packages/8/All/lightsquid-1.8_2.tbz ... (extracting) Dec 30 14:25:28 kernel: m_php_resync_config_command()...done. Dec 30 14:25:32 kernel: one. Dec 30 14:25:41 kernel: d... Dec 30 14:25:43 kernel: 1 Dec 30 14:25:44 kernel: 118>Backing up libraries... Dec 30 14:25:49 check_reload_status: Syncing firewall Dec 30 14:25:52 check_reload_status: Syncing firewall Dec 30 14:25:57 php: : Starting Squid Dec 30 14:25:57 squid[59243]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:25:57 php: : The command '/usr/local/sbin/squid -D' returned exit code '1', the output was 'FATAL: Bungled squid.conf line 16: logfile_rotate Squid Cache (Version 2.7.STABLE9): Terminated abnormally.' Dec 30 14:26:09 check_reload_status: Syncing firewall Dec 30 14:26:11 check_reload_status: Syncing firewall Dec 30 14:26:16 php: : Starting Squid Dec 30 14:26:16 squid[63724]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:26:16 php: : The command '/usr/local/sbin/squid -D' returned exit code '1', the output was 'FATAL: Bungled squid.conf line 16: logfile_rotate Squid Cache (Version 2.7.STABLE9): Terminated abnormally.' Dec 30 14:26:29 check_reload_status: Syncing firewall Dec 30 14:26:29 php: : Restarting/Starting all packages. Dec 30 14:26:33 check_reload_status: Syncing firewall Dec 30 14:26:34 php: : Starting Squid Dec 30 14:26:34 squid[30153]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:26:34 php: : The command '/usr/local/sbin/squid -D' returned exit code '1', the output was 'FATAL: Bungled squid.conf line 16: logfile_rotate Squid Cache (Version 2.7.STABLE9): Terminated abnormally.' Dec 30 14:26:44 php: : Not calling package sync code for dependency squidcache of squid because some include files are missing. Dec 30 14:26:44 php: : Not calling package sync code for dependency squidnac of squid because some include files are missing. Dec 30 14:26:44 php: : Not calling package sync code for dependency squid of squid because some include files are missing. Dec 30 14:26:44 php: : Not calling package sync code for dependency squidtraffic of squid because some include files are missing. Dec 30 14:26:44 php: : Not calling package sync code for dependency squidupstream of squid because some include files are missing. Dec 30 14:26:44 php: : Not calling package sync code for dependency squidauth of squid because some include files are missing. Dec 30 14:26:44 php: : Not calling package sync code for dependency squidusers of squid because some include files are missing. Dec 30 14:26:44 check_reload_status: Reloading filter Dec 30 14:26:44 php: : Not calling package sync code for dependency squidcache of squid because some include files are missing. Dec 30 14:26:44 squid[33478]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:26:47 squid[34858]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:26:49 check_reload_status: Syncing firewall Dec 30 14:26:51 check_reload_status: Syncing firewall Dec 30 14:26:56 php: : Starting Squid Dec 30 14:26:56 squid[39005]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:26:56 php: : The command '/usr/local/sbin/squid -D' returned exit code '1', the output was 'FATAL: Bungled squid.conf line 16: logfile_rotate Squid Cache (Version 2.7.STABLE9): Terminated abnormally.' Dec 30 14:26:57 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 14:26:57 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 14:26:57 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 14:27:06 check_reload_status: Reloading filter Dec 30 14:27:09 php: : IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing. Dec 30 14:27:10 login: login on ttyv0 as root Dec 30 14:27:12 check_reload_status: Reloading filter Dec 30 14:27:13 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 14:27:13 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 14:27:13 Squid_Alarm[10700]: Squid has exited. Reconfiguring filter. Dec 30 14:27:13 Squid_Alarm[10967]: Attempting restart... Dec 30 14:27:14 squid[11935]: Bungled squid.conf line 16: logfile_rotate Dec 30 14:27:14 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 14:27:18 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 14:27:18 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 14:27:18 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 14:30:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 14:30:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 14:30:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 14:45:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 14:45:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 14:45:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 15:00:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 15:00:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 15:00:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 15:15:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 15:15:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 15:15:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 15:30:02 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 15:30:02 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 15:30:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 15:45:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 15:45:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 15:45:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 16:00:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 16:00:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 16:00:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 16:15:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 16:15:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 16:15:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 16:30:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 16:30:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 16:30:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 16:45:02 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 16:45:02 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 16:45:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 17:00:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 17:00:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 17:00:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 17:15:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 17:15:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 17:15:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 17:30:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 17:30:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 17:30:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 17:45:02 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 17:45:02 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 17:45:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 18:00:02 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 18:00:02 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 18:00:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 18:15:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 18:15:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 18:15:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 18:30:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 18:30:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 18:30:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 18:45:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 18:45:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 18:45:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 19:00:02 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 19:00:02 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 19:00:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 19:15:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 19:15:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 19:15:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 19:27:44 apinger: ALARM: GW_OPT2(192.168.3.1) *** down *** Dec 30 19:27:54 check_reload_status: Reloading filter Dec 30 19:28:00 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 19:28:00 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 19:28:00 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 19:30:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 19:30:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 19:30:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 19:30:02 apinger: alarm canceled: GW_OPT2(192.168.3.1) *** down *** Dec 30 19:30:12 check_reload_status: Reloading filter Dec 30 19:30:18 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 19:30:18 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 19:30:19 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 19:45:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 19:45:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 19:45:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 20:00:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 20:00:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 20:00:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 20:15:02 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 20:15:02 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 20:15:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 20:29:07 apinger: ALARM: GW_OPT2(192.168.3.1) *** down *** Dec 30 20:29:17 check_reload_status: Reloading filter Dec 30 20:29:23 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 20:29:24 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 20:29:24 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 20:30:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 20:30:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 20:30:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 20:31:23 apinger: alarm canceled: GW_OPT2(192.168.3.1) *** down *** Dec 30 20:31:33 check_reload_status: Reloading filter Dec 30 20:31:39 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 20:31:40 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 20:31:40 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 20:45:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 20:45:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 20:45:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 21:00:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 21:00:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 21:00:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 21:08:03 php: /index.php: Successful webConfigurator login for user 'mhby87' from 110.159.88.247 Dec 30 21:08:03 php: /index.php: Successful webConfigurator login for user 'mhby87' from 110.159.88.247 Dec 30 21:08:10 apinger: ALARM: GW_OPT2(192.168.3.1) *** down *** Dec 30 21:08:20 check_reload_status: Reloading filter Dec 30 21:08:26 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 21:08:26 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 21:08:26 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 21:10:27 apinger: alarm canceled: GW_OPT2(192.168.3.1) *** down *** Dec 30 21:10:37 check_reload_status: Reloading filter Dec 30 21:10:43 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 21:10:43 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 21:10:43 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 21:15:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 21:15:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 21:15:01 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 21:30:02 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 21:30:02 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 21:30:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 21:45:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 21:45:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 21:45:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 21:53:07 squid[19582]: Memory pools are 'off'; limit: 0.00 MB Dec 30 21:53:07 squid[19582]: Memory pools are 'off'; limit: 0.00 MB Dec 30 21:53:07 squid[19582]: diskd started Dec 30 21:53:07 squid[19582]: diskd started Dec 30 21:53:07 squid[19582]: Including Configuration File: /usr/local/etc/squid/squid.conf (depth 0) Dec 30 21:53:07 squid[19582]: Including Configuration File: /usr/local/etc/squid/squid.conf (depth 0) Dec 30 21:53:07 squid[19582]: Bungled squid.conf line 16: logfile_rotate Dec 30 21:53:07 squid[19582]: Bungled squid.conf line 16: logfile_rotate Dec 30 21:53:21 squid[21277]: Bungled squid.conf line 16: logfile_rotate Dec 30 21:53:23 squid[22534]: Bungled squid.conf line 16: logfile_rotate Dec 30 21:57:22 squid[4327]: Bungled squid.conf line 16: logfile_rotate Dec 30 21:57:24 squid[5850]: Bungled squid.conf line 16: logfile_rotate Dec 30 21:59:13 squid[37313]: Memory pools are 'off'; limit: 0.00 MB Dec 30 21:59:13 squid[37313]: Memory pools are 'off'; limit: 0.00 MB Dec 30 21:59:13 squid[37313]: diskd started Dec 30 21:59:13 squid[37313]: diskd started Dec 30 21:59:13 squid[37313]: Including Configuration File: /usr/local/etc/squid/squid.conf (depth 0) Dec 30 21:59:13 squid[37313]: Including Configuration File: /usr/local/etc/squid/squid.conf (depth 0) Dec 30 21:59:13 squid[37313]: Bungled squid.conf line 16: logfile_rotate Dec 30 21:59:13 squid[37313]: Bungled squid.conf line 16: logfile_rotate Dec 30 21:59:55 squid[8765]: Bungled squid.conf line 16: logfile_rotate Dec 30 21:59:57 squid[9838]: Bungled squid.conf line 16: logfile_rotate Dec 30 22:00:01 php: : SQUID is installed but not started. Not installing "nat" rules. Dec 30 22:00:01 php: : SQUID is installed but not started. Not installing "pfearly" rules. Dec 30 22:00:02 php: : SQUID is installed but not started. Not installing "filter" rules. Dec 30 22:09:09 check_reload_status: Syncing firewall Dec 30 22:09:09 syslogd: exiting on signal 15 Dec 30 22:09:09 syslogd: kernel boot file is /boot/kernel/kernel</seagate></via></via></atapi-cd></generic></system></isa></parallel></printer></plip></parallel></parallel></floppy></at></at></keyboard></power></via></via></ata></ata></via></isa></pci-isa></i82555></mii></intel></adaptec></adaptec></i82555></mii></intel></i82555></mii></intel></realtek></mii></realtek></vga-compatible></acpi></acpi></via></acpi></acpi></acpi></acer></software></version></acer></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse>
Dec 30 14:26:56 php: : The command '/usr/local/sbin/squid -D' returned exit code '1', the output was 'FATAL: Bungled squid.conf line 16: logfile_rotate Squid Cache (Version 2.7.STABLE9): Terminated abnormally.'
-
ok, go into the squid GUI and set a value in the rotate box for now, that should make it happy.
Squid's docs said that setting logfile_rotate to 0 was OK, but perhaps that didn't apply to the version we have. Though it worked for me when I tried it, perhaps because it was running when I started it.
-
Or perhaps I used the wrong variable in a config statement and that is valid. Fix pending, give it ~20minutes
-
Now it's running, thank you.
-
Or perhaps I used the wrong variable in a config statement and that is valid. Fix pending, give it ~20minutes
The update worked for me :)
Thanks