NEW Package: freeRADIUS 2.x
-
Missing dependencies are:
libmysqlclient.so.18 => not found (0x0)
libpq.so.5 => not found (0x0)
libldap_r-2.4.so.8 => not found (0x0)
libpq.so.5 => not found (0x0)Did you find any other?
-
Missing dependencies are:
libmysqlclient.so.18 => not found (0x0)
libpq.so.5 => not found (0x0)
libldap_r-2.4.so.8 => not found (0x0)
libpq.so.5 => not found (0x0)Did you find any other?
I only checked these few modules. I will check the others and post back in some minutes!
-
see if these packages reduces missing dependencies
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/mysql-client-5.1.60.tbz
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/cyrus-sasl-2.1.25_1.tbz
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/openldap-sasl-client-2.4.26.tbz -
I found this is missing in ldap.so, too:
libsasl2.so.2 => not found (0x0)Ok, I tested many other modules I know that they are used and there seems to be all ok.
PS: Can you make "WITHOUT_USERS" ? Or will we do this later in pkg_config.8.xml ?
–-- saw your edit ----
This fixed the missing dependency I posted above but with errors:
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(86): pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/cyrus-sasl-2.1.25_1.tbz Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/cyrus-sasl-2.1.25_1.tbz... Done. *** Added group `cyrus' (id 60) *** Added user `cyrus' (id 60) /libexec/ld-elf.so.1: Shared object "libgssapi.so.10" not found, required by "saslpasswd2" /libexec/ld-elf.so.1: Shared object "libgssapi.so.10" not found, required by "sasldblistusers2" WARNING: Failed to create /usr/local/etc/sasldb2.db You can use sasldb2 for authentication, to add users use: saslpasswd2 -c username If you want to enable SMTP AUTH with the system Sendmail, read Sendmail.README NOTE: This port has been compiled with a default pwcheck_method of auxprop. If you want to authenticate your user by /etc/passwd, PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and set sasl_pwcheck_method to saslauthd after installing the Cyrus-IMAPd 2.X port. You should also check the /usr/local/lib/sasl2/*.conf files for the correct pwcheck_method. [2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(87): ldd rlm_ldap.so rlm_ldap.so: libfreeradius-radius-2.1.12.so => /usr/local/lib/freeradius-2.1.12/libfreeradius-radius-2.1.12.so (0x800c00000) libldap_r-2.4.so.8 => not found (0x0) liblber-2.4.so.8 => /usr/local/lib/liblber-2.4.so.8 (0x800d21000) libsasl2.so.2 => /usr/local/lib/libsasl2.so.2 (0x800e2e000) libssl.so.6 => /usr/lib/libssl.so.6 (0x800f48000) libcrypto.so.6 => /lib/libcrypto.so.6 (0x80109a000) libthr.so.3 => /lib/libthr.so.3 (0x801334000) libc.so.7 => /lib/libc.so.7 (0x800646000) [2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(88):mysql-client didn't fix anything. Still missing:
libmysqlclient.so.18 => not found (0x0)openldap-sasl-client fixed the missing rlm_ldap.so dependency.
So just these two are still missing: (PGSQL, SQL and MySQL)
libmysqlclient.so.18 => not found (0x0) libpq.so.5 => not found (0x0)[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(98): ldd rlm_sql_mysql.so rlm_sql_mysql.so: libmysqlclient.so.18 => not found (0x0) libz.so.5 => /lib/libz.so.5 (0x800c00000) libm.so.5 => /lib/libm.so.5 (0x800d15000) libthr.so.3 => /lib/libthr.so.3 (0x800e34000) libc.so.7 => /lib/libc.so.7 (0x800646000) [2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(99): ldd rlm_sql_postgresql.so rlm_sql_postgresql.so: libpq.so.5 => not found (0x0) libthr.so.3 => /lib/libthr.so.3 (0x800c00000) libc.so.7 => /lib/libc.so.7 (0x800646000) -
Copy sasl missing deps from this folder
http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/The dest folder maybe /usr/local/lib
-
Which version of mysql-client did you choose ? pkg_info says 5.1.60
If did:
pkg_add -f ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-8-stable/All/mysql-client-5.5.19.tbzThis seems to fix the missing libmysqlclient.so.18:
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(43): ldd rlm_sql_mysql.so rlm_sql_mysql.so: libmysqlclient.so.18 => /usr/local/lib/mysql/libmysqlclient.so.18 (0x800c00000) libz.so.5 => /lib/libz.so.5 (0x801035000) libm.so.5 => /lib/libm.so.5 (0x80114a000) libthr.so.3 => /lib/libthr.so.3 (0x801269000) libc.so.7 => /lib/libc.so.7 (0x800646000) libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x801381000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x80158c000)This command gave me before just .15.so and .16.so but not the recommended .18.so
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(45): ldconfig -r | grep 'mysql' search directories: /usr/lib:/usr/local/lib:/lib:/usr/local/lib/freeradius-2.1.12:/usr/local/lib/mysql 127:-lmysqlclient.15 => /usr/local/lib/mysql/libmysqlclient.so.15 128:-lmysqlclient.16 => /usr/local/lib/mysql/libmysqlclient.so.16 129:-lmysqlclient_r.16 => /usr/local/lib/mysql/libmysqlclient_r.so.16 130:-lmysqlclient.18 => /usr/local/lib/mysql/libmysqlclient.so.18 131:-lmysqlclient_r.18 => /usr/local/lib/mysql/libmysqlclient_r.so.18 -
And this fixed the PGSQL:
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(57): pkg_add -r ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-8-stable/All/postgresql-client-9.1.2.tbz Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-8-stable/All/postgresql-client-9.1.2.tbz... Done. Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-8-stable/All/pkg-config-0.25_1.tbz... Done. Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-8-stable/All/libxml2-2.7.8_1.tbz... Done. The PostgreSQL port has a collection of "side orders": postgresql-docs For all of the html documentation p5-Pg A perl5 API for client access to PostgreSQL databases. postgresql-tcltk If you want tcl/tk client support. postgresql-jdbc For Java JDBC support. postgresql-odbc For client access from unix applications using ODBC as access method. Not needed to access unix PostgreSQL servers from Win32 using ODBC. See below. ruby-postgres, py-PyGreSQL For client access to PostgreSQL databases using the ruby & python languages. p5-postgresql-plperl, postgresql-pltcl & postgresql-plruby For using perl5, tcl & ruby as procedural languages. postgresql-contrib Lots of contributed utilities, postgresql functions and datatypes. There you find pg_standby, pgcrypto and many other cool things. etc... [2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(58): ldd rlm_sql_postgresql.so rlm_sql_postgresql.so: libpq.so.5 => /usr/local/lib/libpq.so.5 (0x800c00000) libthr.so.3 => /lib/libthr.so.3 (0x800d29000) libc.so.7 => /lib/libc.so.7 (0x800646000) libintl.so.9 => /usr/local/lib/libintl.so.9 (0x800e41000) libssl.so.6 => /usr/lib/libssl.so.6 (0x800f4a000) libcrypto.so.6 => /lib/libcrypto.so.6 (0x80109c000) libiconv.so.3 => /usr/local/lib/libiconv.so.3 (0x801336000) [2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(59): -
Which version of mysql-client did you choose ? pkg_info says 5.1.60
I'll change it to 5.5
-
As long as you are doing all my work - please let me know if I could help you at least a bit :P
-
As long as you are doing all my work -
That's fun :D
Instead of pcbsd, try a pure freebsd.
please let me know if I could help you at least a bit :P
we are helping each other. I compile and you check dependencies
-
Is it posible to use existing users of activedirectory in this package ? Pfsense comes with certeficate managment and user list and works with active directory and also freeradius supports active directory.
So would be nice to remove certiificate option and user option and just use pfsense user list or other servers that are listed in user settings in pfsense. Does the current package supports active directory if i edit config by hand or the module is not compiled in ? -
Does the current package supports active directory if i edit config by hand or the module is not compiled in ?
That's what we is trying to do. ;)
For now it's not supported as we are compiling freeradius with kerberos and etc.
After binaries are ok, Nachtfalke will continue package update.
-
Nachtfalke,
mysql5.5 and postgres9.1.2 are uploaded.
I'm also doind this job to i386 the link is
http://e-sac.siteseguro.ws/packages/8/All/
-
Okay, then I will reset my VMs and test. :)
-
Feedback for tested machine pfsense 2.0.1 amd64:
This installs without errors or missing dependencies:
http://e-sac.siteseguro.ws/packages/amd64/8/All/freeradius-2.1.12.tbzI need to manually install these packages because ldap and *sql have missing files.
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/mysql-client-5.1.60.tbz pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/cyrus-sasl-2.1.25_1.tbz pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/openldap-sasl-client-2.4.26.tbzStill the (minor) error with this package:
http://e-sac.siteseguro.ws/packages/amd64/8/All/cyrus-sasl-2.1.25_1.tbz[2.0.1-RELEASE][admin@pfsense.localdomain]/root(13): pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/cyrus-sasl-2.1.25_1.tbz Fetching http://e-sac.siteseguro.ws/packages/8/All/cyrus-sasl-2.1.25_1.tbz... Done. Fetching http://e-sac.siteseguro.ws/packages/8/All/db41-4.1.25_4.tbz... Done. *** Added group `cyrus' (id 60) *** Added user `cyrus' (id 60) /libexec/ld-elf.so.1: Shared object "libgssapi.so.10" not found, required by "saslpasswd2" /libexec/ld-elf.so.1: Shared object "libgssapi.so.10" not found, required by "sasldblistusers2" WARNING: Failed to create /usr/local/etc/sasldb2 You can use sasldb2 for authentication, to add users use: saslpasswd2 -c username If you want to enable SMTP AUTH with the system Sendmail, read Sendmail.README NOTE: This port has been compiled with a default pwcheck_method of auxprop. If you want to authenticate your user by /etc/passwd, PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and set sasl_pwcheck_method to saslauthd after installing the Cyrus-IMAPd 2.X port. You should also check the /usr/local/lib/sasl2/*.conf files for the correct pwcheck_method.After installing all above I can start radiusd. This is what I tested:
plain users file authentication using "radtest" tool.
Authentication works.I enabled ldap and configured users file to only use ldap to authenticate users:
freeradius is starting, loading the ldap modules and default configuration. I have tested with "radtest" tool and the radius tries to connect to ldap. I do not have any LDAP/AD configured so I could not finally test that. But it looks like it should work.I disabled ldap and enabled sql.
using "MYSQL" as datasbase and "POSTGRESSQL" is working. I still have no database to test but I did the tests from ldap and freeradius tries to connect to sql database.We didn't compile ORACLE because this is still experimental.
Something what is a bit strange is that I could choose "MSSQL" in sql.conf but the there is the rlm_sql_mssql.sq module missing. But there is no build option in Makefile for this database support. Perhaps we could think about that in future versions but not at the moment.Kerberos module has all dependencies but could not test it. Kerberos together with samba to use MS AD to authenticate.
That is something what isn't really clear for me at the moment and the freeradius documentation isn't, too. Is the ldap module enough to connect to an MS AD or do we really need to go the way using kerberos and samba. perhaps the second way is the way which fully sopports MS AD. As far as I know Windows Server 2003 and high have the ability to communicate with the LDAP protocol.
But there is nothing we can do now - I think.I will go on testing i386 as I did it with amd64.
-
The missing Shared object are not related to cyrus packages but on files not included in pfSense. That why I created a folder with missing libs
It's easy to work around in xml instalation.
cyrus is also used in postfix for authentication in smtp.
-
The missing Shared object are not related to cyrus packages but on files not included in pfSense. That why I created a folder with missing libs
It's easy to work around in xml instalation.
cyrus is also used in postfix for authentication in smtp.
Yes, we can use "additionalfilesneeded" right ?
i386:
It is not build with PostgreSQL.
And "openldap-sasl-client-2.4.26.tbz" is missing on your server.
"Cyrus-sasl" installs fine when I add the "ldd" files before.
krb5 is ok with dependencies, mysql is too.Puhhh, that was really hard work on this package…for you :P
But great job till now. SQL and LDAP support will make this package interesting for some people :) -
Hi,
I have just removed the old package and installed the current one 2.1.12 pkg v1.4.2
The configuration has been kept back, but now I cannot login properly.This is the log :
Tue Jan 3 21:52:49 2012 : Auth: Login incorrect: [$MYUSER/<via auth-type="EAP">] (from client pfsenselocal port 0 cli B4-07-F9-E5-9F-81)</via>
I have also tried to reset the username and pass but It did not work.
It was fine before upgrading though.
Thanks
-
Hi,
I have just removed the old package and installed the current one 2.1.12 pkg v1.4.2
The configuration has been kept back, but now I cannot login properly.This is the log :
Tue Jan 3 21:52:49 2012 : Auth: Login incorrect: [$MYUSER/<via auth-type="EAP">] (from client pfsenselocal port 0 cli B4-07-F9-E5-9F-81)</via>
I have also tried to reset the username and pass but It did not work.
It was fine before upgrading though.
Thanks
Which pkg version did you use before ?
Do you user certificates or just username/password ?
Do you connect from a windows client ?Can you post output of "users" file ? (View Config -> users)
-
Hi thanks for you quick reply :-)
I used the 1.4.0 I think, I did upgrade yesterday if I am not wrong. Today I found there was a new update so I have upgraded straightaway as I have never had any problems in the past to upgrade to the very next version.
I use only username and password, not any certificate at the moment, but it's something I will look into.
I am using my android mobile phone gingerbread v. 2.3.6 ( used to work yesterday ).
The config file is :
/usr/local/etc/raddb/users
"myuser" Cleartext-Password := "mypass", Simultaneous-Use := "3"
