What the hell happened to /packages-8.1-release/Latest/ on ftp.freebsd.org

sdudley

Thanks for the replies on this Marcelloc, still no luck though. It's actually worse now as it's spewing dependency errors before installing subversion. A slightly educated guess indicates that perhaps the URL points to packages that are older than what is contained in PFSense 2.01 based on the errors returned when adding the subversion package at the shell. Also noticed that I could not set the environmental variable PACKAGESITE to the URL you provided, instead I had to forgo setting the PACKAGESITE variable and use pkg_add -r with the complete URL directly to the subversion package file which then resulted in the dependency complaints noted below. Transcript of the entire effort is below.

In addition, I did find this http://doc.pfsense.org/index.php/PfSense_and_FreeBSD_Versions where the specific version of the underlying FreeBSD for each version of PFSense is detailed however I'm not familiar enough with FreeBSD to know what packages make up 8.1-RELEASE-p6 compared to PFSense 2.0 and it's FreeBSD 8.1-RELEASE-p4 or where those packages would be found. I tried to use the FreeBSD handbook site although being a bit simple minded, I couldn't follow the release tree description and was unable to make sense out what the p6 vs p4 meant other than the logical deduction that p6 is likely a newer release. Using the package dependency errors as an indicator, I wonder if the URL for P6 is actually http://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-8-stable

Here's the transcript using the URL you suggested.
Setting the PACKAGESITE environmental variable for my shell session using the URL you provided:
setenv PACKAGESITE http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/8.1-RELEASE/packages/All/

Attempting to add subversion:
pkg_add -r subversion

Error: Unable to get http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/8.1-RELEASE/packages/All/subversion.tbz: Not Found
pkg_add: unable to fetch 'http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/8.1-RELEASE/packages/All/subversion.tbz' by URL

Adjusted tactics and used the complete URL path to the subversion package which went a bit further and then produced the dependency errors.
pkg_add -r http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/8.1-RELEASE/packages/All/subversion-1.6.12.tbz
Fetching http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/8.1-RELEASE/packages/All/subversion-1.6.12.tbz… Done.
pkg_add: warning: package 'subversion-1.6.12' requires 'expat-2.0.1_1', but 'expat-2.0.1_2' is installed
pkg_add: warning: package 'subversion-1.6.12' requires 'sqlite3-3.6.23.1_1', but 'sqlite3-3.7.9' is installed
pkg_add: warning: package 'subversion-1.6.12' requires 'gdbm-1.8.3_3', but 'gdbm-1.9.1' is installed
pkg_add: warning: package 'subversion-1.6.12' requires 'gettext-0.18_1', but 'gettext-0.18.1.1' is installed
pkg_add: warning: package 'subversion-1.6.12' requires 'neon29-0.29.3_1', but 'neon29-0.29.6_4' is installed
pkg_add: warning: package 'subversion-1.6.12' requires 'apr-ipv6-devrandom-gdbm-db42-1.4.2.1.3.9_1', but 'apr-ipv6-devrandom-gdbm-db42-1.4.5.1.3.12_1' is installed

I respect PFSense's approach towards minimal software footprint and this has indeed been an exercise in humility and patience for a seemingly minor task. As always, I appreciate any insight, enlightenment or suggestions aimed towards a resolution.

Shaun

marcelloc

I will compile svn for you and share here the links.

stephenw10

Those are all later versions? :-\

Shouldn't you be using:

setenv PACKAGESITE ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/8.1-RELEASE/packages/Latest/

/Latest and /All seem only to differ by package name but it means you don't have to know the version to install.
Don't know ftp vs http make any difference, works for me.

Steve

sdudley

Thanks for the suggestion Steve. These also appear to be older packages than what PFSense 2.01 contains if the error messages are any indicator.
pkg_add -r subversion
Fetching ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/8.1-RELEASE/packages/Latest/subversion.tbz… Done.
pkg_add: warning: package 'subversion-1.6.12' requires 'expat-2.0.1_1', but 'expat-2.0.1_2' is installed
pkg_add: warning: package 'subversion-1.6.12' requires 'sqlite3-3.6.23.1_1', but 'sqlite3-3.7.9' is installed
pkg_add: warning: package 'subversion-1.6.12' requires 'gdbm-1.8.3_3', but 'gdbm-1.9.1' is installed
pkg_add: warning: package 'subversion-1.6.12' requires 'gettext-0.18_1', but 'gettext-0.18.1.1' is installed
pkg_add: warning: package 'subversion-1.6.12' requires 'neon29-0.29.3_1', but 'neon29-0.29.6_4' is installed
pkg_add: warning: package 'subversion-1.6.12' requires 'apr-ipv6-devrandom-gdbm-db42-1.4.2.1.3.9_1', but 'apr-ipv6-devrandom-gdbm-db42-1.4.5.1.3.12_1' is installed

Hoping to take Marcello up on his offer to pre-compile a 'native' PFSense 2.01 package for svn. Logically I would assume that any pfsense 2.01 installation where folks are trying to also run Mark's PBXFUsion and FreePBX would benefit. Given that PFSense 2.01 is likely to be around for some time and as far as I know, svn is the only other additional package needed to automate PBXFusion code updates, this should benefit others as well.

Shaun

stephenw10

I suspect you at some point had the 8.2 repo set as the packagesite and have installed newer versions.

It's hard to say quite what you have at this point.

Might be easiest to re-install pfSense so you at least know what you're working with.

Steve

marcelloc

@sdudley:

Hoping to take Marcello up on his offer to pre-compile a 'native' PFSense 2.01 package for svn.

I'm compiling version 1.7

marcelloc

It's done.

check if it install with no missing dependencies

i386 version
http://e-sac.siteseguro.ws/packages/8/All/subversion-1.7.2.tbz

amd64 version
http://e-sac.siteseguro.ws/packages/amd64/8/All/subversion-1.7.2.tbz

sdudley

Close but still doesn't work. Here's the transcript.

pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/subversion-1.7.2.tbz
Fetching http://e-sac.siteseguro.ws/packages/8/All/subversion-1.7.2.tbz… Done.
pkg_add: warning: package 'subversion-1.7.2' requires 'sqlite3-3.7.9_1', but 'sqlite3-3.7.9' is installed

After the install, invoking svn from a shell displays the following error.
/libexec/ld-elf.so.1: Shared object "libgssapi_krb5.so" not found, required by "svn"

For reference, I have only attempted to pkg_add subversion during this time and have not messed with any other packages.

Here's what pkg_info shows:
apr-ipv6-devrandom-gdbm-db42-1.4.5.1.3.12_1 Apache Portability Library
bsdinstaller-2.0.2011.1212 BSD Installer mega-package
db42-4.2.52_5 The Berkeley DB package, revision 4.2
expat-2.0.1_2 XML 1.0 parser written in C
gdbm-1.9.1 The GNU database manager
gettext-0.18.1.1 GNU gettext package
grub-0.97_4 GRand Unified Bootloader
libiconv-1.13.1_1 A character set conversion library
neon29-0.29.6_4 An HTTP and WebDAV client library for Unix systems
pkg-config-0.25_1 A utility to retrieve information about installed libraries
sqlite3-3.7.9 An SQL database engine in a C library
subversion-1.7.2 Version control system

If you think it would help, I'm happy to re-install pfsense 2.01 again for a clean slate as suggested by Steve, re-install PBXFusion and Freeswitch per Mark's instructions and then try your subversion custom compiled package/port however, I won't be able to do that until after hours.

marcelloc

sasl dependencies are included in freradius2 pfsense package, you could install it before reinstall and see if stops lib erros.

sdudley

OK, installed the freeradius2 package through PFSense2.01's web menu. Noticed that as the PFSense 2.01 web gui was installing the freeradius2 package that it still retained the package source of http://e-sac.siteseguro.ws/packages/8/All/ Is this correct?

Re-installed your custom subversion package:
pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/subversion-1.7.2.tbz
Fetching http://e-sac.siteseguro.ws/packages/8/All/subversion-1.7.2.tbz… Done.
pkg_add: package 'subversion-1.7.2' or its older version already installed

Executing svn now prompts for a slightly different shared object:
/libexec/ld-elf.so.1: Shared object "libgssapi.so.10" not found, required by "libneon.so.27"

Is this an indicator of progress? It's beginning to feel like a game of whack-a-mole. :D
Appreciate the assist though.
Shaun

marcelloc

redo a pkg_info and post here

sdudley

Here's the latest pkg_info response:
pkg_info
apr-ipv6-devrandom-gdbm-db42-1.4.5.1.3.12_1 Apache Portability Library
bsdinstaller-2.0.2011.1212 BSD Installer mega-package
db42-4.2.52_5 The Berkeley DB package, revision 4.2
expat-2.0.1_2 XML 1.0 parser written in C
gdbm-1.9.1 The GNU database manager
gettext-0.18.1.1 GNU gettext package
grub-0.97_4 GRand Unified Bootloader
krb5-1.9.2_1 An authentication system developed at MIT, successor to Ker
libiconv-1.13.1_1 A character set conversion library
neon29-0.29.6_4 An HTTP and WebDAV client library for Unix systems
perl-5.12.4_3 Practical Extraction and Report Language
pkg-config-0.25_1 A utility to retrieve information about installed libraries
sqlite3-3.7.9 An SQL database engine in a C library
subversion-1.7.2 Version control system

marcelloc

whereis the freeradius package?

sdudley

Good point. Despite the GUI in PFSense 2.01 claiming that freeradius2 package was installed when it actually wasn't. Dropped back to a shell and executed pkg_add freeradius2:
pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/freeradius-2.1.12.tbz
Fetching http://e-sac.siteseguro.ws/packages/8/All/freeradius-2.1.12.tbz… Done.
Fetching http://e-sac.siteseguro.ws/packages/8/All/libltdl-2.4_1.tbz... Done.
Fetching http://e-sac.siteseguro.ws/packages/8/All/mysql-client-5.5.19.tbz... Done.
Fetching http://e-sac.siteseguro.ws/packages/8/All/postgresql-client-9.1.2.tbz... Done.

The PostgreSQL port has a collection of "side orders":

postgresql-docs
For all of the html documentation

p5-Pg
A perl5 API for client access to PostgreSQL databases.

postgresql-tcltk
If you want tcl/tk client support.

postgresql-jdbc
For Java JDBC support.

postgresql-odbc
For client access from unix applications using ODBC as access
method. Not needed to access unix PostgreSQL servers from Win32
using ODBC. See below.

ruby-postgres, py-PyGreSQL
For client access to PostgreSQL databases using the ruby & python
languages.

p5-postgresql-plperl, postgresql-pltcl & postgresql-plruby
For using perl5, tcl & ruby as procedural languages.

postgresql-contrib
Lots of contributed utilities, postgresql functions and
datatypes. There you find pg_standby, pgcrypto and many other cool
things.

etc...

===> Setting user and group in radiusd.conf
===> Creating users and/or groups.
Creating group 'freeradius' with gid '133'.
Creating user 'freeradius' with uid '133'.
===> Bootstrapping default certificates, please wait...
===> Adjusting ownership of directory /usr/local/etc/raddb
===> Adjusting ownership of directory /var/log/radacct
===> Adjusting ownership of directory /var/run/radiusd
===> Adjusting ownership of /var/log/radius.log
===> Adjusting ownership of /var/log/radutmp
===> Adjusting ownership of /var/log/radwtmp
===> Updating libdir in /usr/local/etc/raddb/radiusd.conf

===============================================================================

To enable FreeRADIUS, put the following line in /etc/rc.conf

radiusd_enable="YES"

The sample configuration can be found at
/usr/local/share/examples/freeradius/raddb

If you are upgrading FreeRADIUS, you are advised to use this as a reference
for updating your configuration.

FreeRADIUS will look for its configuration directory at
/usr/local/etc/raddb by default.

If you did not already have a configuration at this location, the sample
configuration has been copied to this location and has been bootstrapped.

If you wish to point FreeRADIUS to a configuration at a different
location, put the following line in /etc/rc.conf

radiusd_flags="-d /path/to/raddb"

To start the server in normal (daemon) mode, run:

/usr/local/etc/rc.d/radiusd start

and to stop the server, run:

/usr/local/etc/rc.d/radiusd stop

To start the server in debugging mode, run:

/usr/local/etc/rc.d/radiusd debug

You are advised to make cautious changes to the configuration, and to test
frequently, using debugging mode where necessary. Try to resist the
temptation to disable or delete things that you don't understand - you may
well break things!

The documentation has been installed at /usr/local/share/doc/freeradius

Useful configuration advice can be found in the FreeRADIUS Wiki at
http://wiki.freeradius.org

===============================================================================

Checked pkg_info to confirm freeradius2 installation:
pkg_info
apr-ipv6-devrandom-gdbm-db42-1.4.5.1.3.12_1 Apache Portability Library
bsdinstaller-2.0.2011.1212 BSD Installer mega-package
db42-4.2.52_5 The Berkeley DB package, revision 4.2
expat-2.0.1_2 XML 1.0 parser written in C
freeradius-2.1.12 A free RADIUS server implementation
gdbm-1.9.1 The GNU database manager
gettext-0.18.1.1 GNU gettext package
grub-0.97_4 GRand Unified Bootloader
krb5-1.9.2_1 An authentication system developed at MIT, successor to Ker
libiconv-1.13.1_1 A character set conversion library
libltdl-2.4_1 System independent dlopen wrapper
mysql-client-5.5.19 Multithreaded SQL database (client)
neon29-0.29.6_4 An HTTP and WebDAV client library for Unix systems
perl-5.12.4_3 Practical Extraction and Report Language
pkg-config-0.25_1 A utility to retrieve information about installed libraries
postgresql-client-9.1.2 PostgreSQL database (client)
sqlite3-3.7.9 An SQL database engine in a C library
subversion-1.7.2 Version control system

Executed svn at the shell and received yet another shared object error message.
svn
/libexec/ld-elf.so.1: Shared object "libgssapi.so.10" not found, required by "libneon.so.27"

Does it matter that I seem to have switched package source from whatever URL is supposed to be associated with PFSense2.01 packages to the one you provided?

marcelloc

the freeradius package as well mailscanner are using my repo as I'm helping or maintaining these packages compilation until it can go to files.pfsense.org

There are some non included libs in pfSense that you can download from this link and include in /usr/local/lib or /usr/bin dir

amd64
http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/
sample download code

cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libasn1.so.10
cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libgssapi.so.10
cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libheimntlm.so.10
cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libhx509.so.10
cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libkrb5.so.10
cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/libroken.so.10
chmod 0755 /usr/local/lib/libasn1.so.10
chmod 0755 /usr/local/lib/libgssapi.so.10
chmod 0755 /usr/local/lib/libheimntlm.so.10
chmod 0755 /usr/local/lib/libhx509.so.10
chmod 0755 /usr/local/lib/ldd/libkrb5.so.10
chmod 0755 /usr/local/lib/libroken.so.10

i386
http://e-sac.siteseguro.ws/pfsense/8/All/ldd/

cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libasn1.so.10
cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libgssapi.so.10
cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libheimntlm.so.10
cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libhx509.so.10
cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libkrb5.so.10
cd /usr/local/lib/ && fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libroken.so.10
chmod 0755 /usr/local/lib/libasn1.so.10
chmod 0755 /usr/local/lib/libgssapi.so.10
chmod 0755 /usr/local/lib/libheimntlm.so.10
chmod 0755 /usr/local/lib/libhx509.so.10
chmod 0755 /usr/local/lib/ldd/libkrb5.so.10
chmod 0755 /usr/local/lib/libroken.so.10

sdudley

Success!!
Added the libraries from the URL you provided to /usr/lib and svn now works. Exciting times indeed. Is there anyway to make this entire process a bit easier for the next person who chooses to install FusionPBX on PFSense 2.01 or anyone who wants to run svn on PFSense 2.01?

Here are the steps to install svn on PFSense 2.01 (i386) Marcelloc, let me know when or if these ever make it to the default pfsense 2.01 package site and I'll update the instructions.

Install compiled subversion package from marcelloc.

From shell, execute the following package installations:
pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/subversion-1.7.2.tbz
pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/freeradius-2.1.12.tbz

Add necessary libraries to support svn dependancies to /usr/lib:

cd /usr/lib
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libgssapi.so.10
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libheimntlm.so.10
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libkrb5.so.10
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libhx509.so.10
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libasn1.so.10
fetch http://e-sac.siteseguro.ws/pfsense/8/All/ldd/libroken.so.10

Thanks again Marcelloc for the huge assist.
Shaun

Cino

I gave this a shot on my 2.1 box and it didn't work for me…Same error message you were receiving. I probably have a conflict with the many packages i have installed


[2.1-DEVELOPMENT][root@pfsense.]/root(1): pkg_info
GeoIP-1.4.8_1       Find the country that any IP address or hostname originates
apr-ipv6-devrandom-gdbm-db42-1.4.5.1.3.12_1 Apache Portability Library
argp-standalone-1.3_1 Standalone version of arguments parsing functions from GLIB
arpwatch-2.1.a15_4  Monitor arp & rarp requests
bsdinstaller-2.0.2011.0805 BSD Installer mega-package
ca_root_nss-3.12.4  The root certificate bundle from the Mozilla Project
curl-7.20.1         Non-interactive tool to get files from FTP, GOPHER, HTTP(S)
cvsps-2.1           Create patchset information from CVS
cyrus-sasl-2.1.23_3 RFC 2222 SASL (Simple Authentication and Security Layer)
daq-0.5_1           Data Acquisition abstraction library for snort 2.9+
db3-3.3.11_3,1      The Berkeley DB package, revision 3.3
db41-4.1.25_4       The Berkeley DB package, revision 4.1
db42-4.2.52_5       The Berkeley DB package, revision 4.2
expat-2.0.1_1       XML 1.0 parser written in C
font-util-1.2.0     Create an index of X font files in a directory
fontconfig-2.8.0,1  An XML-based font configuration API for X Windows
fontconfig-2.8.0_1,1 An XML-based font configuration API for X Windows
freeipmi-0.7.1_1    Library and tools to support IPMI-capable hardware
freeradius-2.1.12   A free RADIUS server implementation
freetype2-2.4.3     A free and portable TrueType font rendering engine
freetype2-2.4.4     A free and portable TrueType font rendering engine
gd-2.0.35_7,1       A graphics library for fast creation of images
gdbm-1.8.3_3        The GNU database manager
gettext-0.18.1.1    GNU gettext package
git-1.7.1.1         Distributed source code management tool
graphviz-2.28.0     Graph Visualization Software from AT&T and Bell Labs
grub-0.97_4         GRand Unified Bootloader
iftop-0.17          Display bandwidth usage on an interface by host
imspector-0.9       IM transparent proxy with monitoring, blocking, and content
iperf-2.0.4         A tool to measure maximum TCP and UDP bandwidth
jpeg-8_3            IJG's jpeg compression utilities
krb5-1.9.2_1        An authentication system developed at MIT, successor to Ker
lcdproc-0.5.5       A client/server suite for LCD devices
libart_lgpl-2.3.21,1 Library for high-performance 2D graphics
libdnet-1.11_3      A simple interface to low level networking routines
libecap-0.0.2       Library for module based network content analysis
libevent-1.4.14b_2  Provides an API to execute callback functions on certain ev
libgcrypt-1.4.5_1   General purpose crypto library based on code used in GnuPG
libgpg-error-1.7_1  Common error values for all GnuPG components
libiconv-1.13.1_1   A character set conversion library
libltdl-2.4         System independent dlopen wrapper
libnet11-1.1.2.1_3,1 A C library for creating IP packets
libpcap-1.1.1_1     Ubiquitous network traffic capture library
libwww-5.4.0_4      The W3C Reference Library
libxml2-2.7.8_1     XML parser library for GNOME
lightsquid-1.8_2    A light and fast web based squid proxy traffic analyser
lua-5.1.4_5         Small, compilable scripting language providing easy access
monit-5.3_1         Unix system management and proactive monitoring
mysql-client-5.1.53 Multithreaded SQL database (client)
mysql-client-5.1.58 Multithreaded SQL database (client)
nano-2.2.4_1        Nano's ANOther editor, an enhanced free Pico clone
neon29-0.29.6_3     An HTTP and WebDAV client library for Unix systems
net-snmp-5.7_3      An extendable SNMP implementation
nmap-5.51           Port scanning utility for large networks
ntop-4.0.1_1        Network monitoring tool with command line and web interface
nut-2.6.1           Network UPS Tools
openldap-client-2.4.26 Open source LDAP client implementation
p5-Error-0.17016    Perl module to provide Error/exception support for perl: Er
p5-GD-2.46          A perl5 interface to Gd Graphics Library version2
p5-Net-SMTP-SSL-1.01 An SMTP client supporting SSL
p7zip-9.13          File archiver with high compression ratio
pcre-8.02           Perl Compatible Regular Expressions library
pcre-8.10           Perl Compatible Regular Expressions library
pcre-8.12           Perl Compatible Regular Expressions library
perl-5.10.1_1       Practical Extraction and Report Language
perl-5.12.3         Practical Extraction and Report Language
perl-threaded-5.10.1_3 Practical Extraction and Report Language
pkg-config-0.23_1   A utility to retrieve information about installed libraries
pkg-config-0.25_1   A utility to retrieve information about installed libraries
png-1.4.4           Library for manipulating PNG images
png-1.4.5_1         Library for manipulating PNG images
postgresql-client-9.1.2 PostgreSQL database (client)
pound-2.5           Reverse proxy, load balancer and HTTP(S) frontend for web s
python26-2.6.5      An interpreted object-oriented programming language
python27-2.7.2_1    An interpreted object-oriented programming language
rrdtool-1.2.26_1    Round Robin Database Tools
sarg-2.2.7.1_2      Squid log analyzer and HTML report generator
snort-2.9.0.5       Lightweight network intrusion detection system
sqlite3-3.7.7.1     An SQL database engine in a C library
sqstat-1.20_2       A script which allows to look through active squid users co
squid-3.1.9         HTTP Caching Proxy
squidGuard-1.4_3    A fast redirector for squid
squid_radius_auth-1.10 RADIUS authenticator for squid proxy 2.5 and later
subversion-1.7.2    Version control system
ttcp-1.12_1         Benchmarking tool for analysing TCP and UDP performance
urwfonts-1.0_3      Another font package for X
vnstat-1.10_2       A console-based network traffic monitor
webfonts-0.30_6     TrueType core fonts for the Web
zip-3.0             Create/update ZIP files compatible with pkzip

marcelloc

what errors did you got?

Cino

spoke too soon, the error is different:

/libexec/ld-elf.so.1: Shared object "libz.so.6" not found, required by "libneon.so.27"