Configuring 2 separate LANs using a single cable modem feed
-
Can PFSense do the following using a PC with 3 NICS, using a single Internet feed.
I’ve setup a 3 hardware router (one wireless) solution to create two completely separate networks using the first router to send traffic to the two working routers. While it works and neither LAN can see the other, the network uplink speed slows to a modem speed crawl, so its worthless perhaps due to a configuration error on my part.
Can you use PFSense to do this by installing 3 NICS in a PC and feeding the results to a switch on the hardware side (10.0.0.1) and a wireless router on the other (192.168.0.1)?
Is their a HowTo buried that you can include a link?
Thanks,
-
Just configure the same way you do in a lan -> wan setup
the only thing you must do different is insert some rule on lan and lan2 to prevent traffic between each other.
-
hey marcelloc how i make this rule? i have two lan and i dont want them talking to one another
-
hey marcelloc how i make this rule? i have two lan and i dont want them talking to one another
you just need to create a rule on lan and lan2 before the rule you allow access.
on lan
source = lan net
destination = lan2 neton lan2
source = lan2 net
destination = lannet
