Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    huawei E398 LTE/4G modem (a.k.a Telekom Speedstick LTE - Vodafone K5005)

    Scheduled Pinned Locked Moved Hardware
    8 Posts 6 Posters 12.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      ryates
      last edited by

      The Huawei e398 LTE/4g usb modem was seen to work with the u3g driver during the 2.0 testing phase. This note serves to advise that whilst older versions of the modem still work on PfSense 2.0 at the time of posting, newer versions will not. Newer devices advertise themselves differently from the older and u3g ignores them.

      Example:
      Hardware Ver. CD3E398M Ver. A Firmware 11.209.03.01.56
      Initial vendor:product id 0x12d1:1446
      Modem vendor:product id 0x12d1:140c

      The above device works.

      Hardware Ver. CD2E398M Ver. C Firmware 11.335.07.00.56
      Initial vendor:product id 0x12d1:1505
      Modem vendor:product id 0x12d1:1506

      The above device does not present an interface via u3g.

      Here is a discussion of differences: http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=706&postdays=0&postorder=asc&start=0

      1 Reply Last reply Reply Quote 0
      • J
        josege
        last edited by

        Any news on this?

        1 Reply Last reply Reply Quote 0
        • R
          ryates
          last edited by

          Here is a followup http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=789.

          For now. one can install usb_modeswitch on freebsd. However, a proper PfSense solution requires Freebsd usb devs or someone capable to add the new incarnation of the the Huawei e398 to the u3g driver and for that to be backported, or used when PfSense moves to Freebsd 9.0. As shown by usb_modeswitch, u3g will allow the device to be run as a modem, as was yhe case with the earlier version of the device.

          However, the "new" e398 has the capability of presenting itself as a network interface and been run via DHCP.  In the first link is a reference to higher speeds being achieved in that mode than via ppp. Both linux and freebsd have yet to develop the new implementation AFAIK.

          1 Reply Last reply Reply Quote 0
          • J
            jamesly
            last edited by

            this dongle already available on Sweden and Austria, i also found it on uk store, i want to update the speeds for my office, pick one HUAWEI E398 to replace the E160 HUAWEI sharing through my Netgear Router, but im confuse whether it is compatible or not, any one has been used or know the result should be apperciate.

            1 Reply Last reply Reply Quote 0
            • M
              merald
              last edited by

              In Sweden, got the product id 0x12d1:1505 and 0x12d1:1506, ISP Telenor 4G.
              Thanks for info. about the new mode except ppp, where really confused when I always get higher speeds in windows than in linux/bsd :P

              Any more news on the subject? Would be convenient with a usb_modeswitcher-package to pfsense if it will take long before official support, almost all Sweden city's have 4G with this adapter by now..

              1 Reply Last reply Reply Quote 0
              • M
                Metu69salemi
                last edited by

                @merald:

                almost all Sweden city's have 4G with this adapter by now..

                Thank you for twisting the knife, atm only our capitol city has fully working 4g and one test city in the middle of the country.. And yes I'm Finnish

                1 Reply Last reply Reply Quote 0
                • M
                  merald
                  last edited by

                  You're welcome :) After many googles later I guess there is no driver to switch it to network card device yet, tried to do everything manual by sending at-commands to device, but never got a working route out. Hope some brighter guy make and publish an ugly hack soon…

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    No 4G in the UK until 2013 at the earliest!  :'(

                    Bah!

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • First post
                      Last post
                    Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.