Limiting traffic to a single LAN IP - can't get this working
-
I'm trying limit the bandwidth to a particular LAN IP. I have created a limiter for each direction (up and down, both set to 256kbit).
I setup a floating rule to match traffic on the LAN interface and enforce the limiter, but it seems to have no effect - bandwidth to the host is not limited. My limiters info page shows the following:
Limiters: 00001: 256.000 Kbit/s 0 ms burst 0 q131073 50 sl. 0 flows (1 buckets) sched 65537 weight 0 lmax 0 pri 0 droptail sched 65537 type FIFO flags 0x0 0 buckets 0 active 00002: 256.000 Kbit/s 0 ms burst 0 q131074 50 sl. 0 flows (1 buckets) sched 65538 weight 0 lmax 0 pri 0 droptail sched 65538 type FIFO flags 0x0 0 buckets 0 active
What might I be missing here?
-
Delete your "Floating" rule, and create on LAN
Action: pass
Source: your "particular LAN IP"
Dest: any
and in advanced features –> In/Out choose your limiters
Put this rule "on top" of any other "pass" rule.