Watchdog timeout – resetting
-
2.0-RC1 (i386)
built on Thu Mar 10 09:34:40 EST 2011updated to today snap to fix errors listed below but problem is still their
Mar 10 15:05:04 php: : Hotplug event detected for lan but ignoring since interface is configured with static IP (192.168.92.1)
Mar 10 15:05:04 kernel: em1: link state changed to DOWN
Mar 10 15:05:04 kernel: em1: Watchdog timeout – resetting
Mar 10 15:05:04 check_reload_status: Linkup starting em1
Mar 10 15:04:36 php: : Hotplug event detected for lan but ignoring since interface is configured with static IP (192.168.92.1)
Mar 10 15:04:36 kernel: em1: link state changed to UP
Mar 10 15:04:36 check_reload_status: Linkup starting em1
Mar 10 15:04:33 php: : Hotplug event detected for lan but ignoring since interface is configured with static IP (192.168.92.1)
Mar 10 15:04:33 kernel: em1: link state changed to DOWN
Mar 10 15:04:33 kernel: em1: Watchdog timeout -- resettingall connection is lost reboot box manually
to get connection back -
look this
-
That thread refers to FreeBSD 7 and 2.0rc1 is based on FreeBSD 8.1.
You are already running a more up to date driver than that.
You can see which driver you are using by viewing the sysctl:[1.2.3-RELEASE] [root@fire.box]/root(2): sysctl dev.em.1.%desc dev.em.1.%desc: Intel(R) PRO/1000 Network Connection 6.9.6
I am running 1.2.3 on this box as you can see. You will have the legacy driver, which is newer! ::)
Steve
Edit: Finally found a good explaination. From version 7.0.0 of the driver the code was seperated into two em and lem, although you won't see that as an end user. The lem driver is for legacy adapters, which is anything pre PCI express.